McCulloch 115154526 - Manuals

12 S As you move forward to the next area to cut, be sure to maintain your balance and footing. Cut using the 2 o’clock to 4 o’clock position of the blade 2 o’clock 4 o’clock RECOMMENDED CUTTING POSITION WARNING: The operator or others must not try to clear away cut material with the engine running ...

13 SERVICE AND ADJUSTMENTS REPLACING THE LINE 1. Press the tabs on the side of the trimmer head and remove cover and spool. Tab Tab Cover Spool 2. Remove any remaining line. 3. Clean dirt and debris from all parts. Re- place spool if it is worn or damaged. 4. Replace with a pre-wound spool, or re- p...

15 STORAGE WARNING: Perform the following steps after each use: S Allow engine to cool before storing or trans- porting. S Store unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc. S Empty fuel t...

17 DECLARATION OF CONFORMITY EC Declaration of Conformity (Only applies to Europe) We, Husqvarna AB , SE-561 82 Huskvarna, Sweden, tel: +46--36--146500, as authorised representative in the Community, declare that the brushcutter model McCulloch Cabrio 433B with serial numbers dating from 2009 and on...

18 TECHNICAL DATA SHEET M ODEL: Cabrio 433B ENGINE Cylinder displacement, cm 3 33 At maximum engine power, rpm 7000 Maximum rotational frequency of the spindle 10000 Engine speed at recommended maximum spindle rotational frequency 7400 Recommended speed idling, rpm 2900 Maximum engine power, measure...