Maytag MFS 25-35 - Manuals

10 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE Sep 05 100646 6kg / 13lb 7kg / 16lb 10kg / 22lb 16kg / 36lb X1 660 mm / 25.98“ 660 mm / 25.98“ 660 mm / 25.98“ 830 mm / 32.7“ X2 560 mm / 22.05“ 560 mm / 22.05“ 560 mm / 22.05“ 715 mm / 28.1“ X3 50 mm / 1.97“ 50 mm / 1.97“ 50 mm / 1.97“ 57.5 mm...

12 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE Sep 05 100646 4.5. ELECTRICAL CONNECTION 4.5.1. GENERAL WARNING !THE MACHINE MUST BE CONNECTED TO THE POWER, GROUND, WATER, VENTILATION AND STEAMSUPPLY ACCORDING TO THE INSTALLATION MANUAL, IN COMPLIANCE WITH THE VALID LOCAL STANDARDSDONE BY QU...

100646 PUBLICATION DATE Sep 05 INSTALLATION AND MAINTENANCE MANUAL 13 Supply cable of the machine must have copper wires. The cross section of the supply wires dependson the supply voltage and on the total electrical power input of the machine (see table 4.3). The supply cablesafety device against a...

14 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE Sep 05 100646 4.5.5. CHECKING ROTATION DIRECTION CHECK IF THE DRUM ROTATES FROM THE FRONT VIEW IN CLOCKWISE DIRECTION DURINGEXTRACTION. IF IT ROTATES IN OPPOSITE DIRECTION, DISCONNECT TWO PHASESOF THE CONNECTION FROM THE FREQUENCY INVERTER TO T...

100646 PUBLICATION DATE Sep 05 INSTALLATION AND MAINTENANCE MANUAL 15 HOT WATER When the machine is provided with a hot water inlet, we advise connecting this inlet to a hot water supplythat is set to 70°C / 158°F. The hot water supply needs to be large enough to provide the required hot waterfor th...

100646 PUBLICATION DATE Sep 05 INSTALLATION AND MAINTENANCE MANUAL 17 AIR VENT CONNECTION WARNING! WATCH OUT, VAPOURS ESCAPE FROM THE MACHINE THROUGH THE AIR VENT OPENING! DO NOT COVER OR CONNECT TO ANYTHING! On the backside, the washers are provided with an air vent opening of O.D. 75 mm / 3".D...

18 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE Sep 05 100646 1. Terminals for connection liquid soap pumps 2. Neutral line 3. Soap signals Fig. 4.7.B. Electrical connection soap pumps 4.8. PREPARING THE MACHINE FOR OPERATION CHECKING BEFORE PUTTING INTO SERVICE 1. Make sure the transporting...

100646 PUBLICATION DATE Sep 05 INSTALLATION AND MAINTENANCE MANUAL 19 5. MAINTENANCE AND ADJUSTMENTS WARNING ! ALWAYS FOLLOW SAFETY INSTRUCTIONS! DO NOT BYPASS ANY SAFETY DEVICES OR THEIRPARTS, ANY INTERFERENCE TO THE MACHINE FUNCTIONS AND CONSTRUCTION ARE PROHIBITED.BEFORE MAINTENANCE WORK DISCONNE...

20 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE Sep 05 100646 5.2. ADJUSTMENTS AND PART´S EXCHANGES ADJUSTMENT OF DOOR SEAL THRUST MACHINES 6kg / 13lb, 7kg / 16lb, 10kg / 22lb If there is a water leakage around the door it is necessary to find out if the problem has been caused dueto the doo...

100646 PUBLICATION DATE Sep 05 INSTALLATION AND MAINTENANCE MANUAL 21 REPLACEMENT OF DOOR RUBBER MACHINES 6kg / 13lb, 7kg / 16lb, 10kg / 22lb 1. Open the door. Remove the door glass (Fig. 5.2.A, pos.3) with rubber (pos.2) from the stainless steel door (pos.5) by pushing it towards the drum. Do it ca...

22 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE Sep 05 100646 REPLACEMENT / REGULATION OF THE BELT WARNING! MAKE SURE THE MACHINE IS DISCONNECTED FROM POWER SUPPLY BY PULLING OUT THEPLUG FROM THE SOCKET. On a new machine and after a belt replacement, make an inspection of the belt tightness ...

100646 PUBLICATION DATE Sep 05 INSTALLATION AND MAINTENANCE MANUAL 23 WATER FILTERS Machines are equipped with filters on water inlets. It is necessary to clean up the filters occasionally to avoida prolongation of filling the machine with water. Intervals of cleaning depend on the quality of the wa...

24 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE Sep 05 100646 6. TROUBLESHOOTING AIDS 6.1. ERROR HANDLING The timer allows the full control of the washing machine. When an error occurs then automatically the machinewill go ov er to a safe state. With the diagnostic program you can determine ...

100646 PUBLICATION DATE Sep 05 INSTALLATION AND MAINTENANCE MANUAL 27 7. LIST OF RECOMMENDED SPARE PARTS Find more detailed information in the spare part manual for individual machines. PRI 340 055 051 Drain valve 3“ 230V PRI 340 020 035 2-way water inlet valve PRI 340 030 038 3-way water inlet valv...

28 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE Sep 05 100646 8. PUTTING THE MACHINE OUT OF SERVICE 8.1. DISCONNECTING THE MACHINE 1. Disconnect the outer electric power supply from the machine. 2. Switch off the main switch located on the back of the machine. 3. Turn off the outer water or ...