Page 4 - TECHNICAL INFORMATION
100646 PUBLICATION DATE Sep 05 INSTALLATION AND MAINTENANCE MANUAL 3 3. TECHNICAL INFORMATION LOAD CAPACITY OF DRYLINEN (1/10) 6 kg / 13 lb 7 kg / 16 lb 10 kg / 22 lb 16 kg / 36 lb DIMENSIONS MACHINE DIMENSIONS Width 660 mm/25.98“ 660 mm/25.98“ 660 mm/25.98“ 835 mm/32.87“ Depth 770 mm/30.31“ 770 mm/...
Page 8 - MACHINE INSTALLATION
100646 PUBLICATION DATE Sep 05 INSTALLATION AND MAINTENANCE MANUAL 7 4. MACHINE INSTALLATION 4.1. MACHINE INSPECTION When the machine is delivered, it is necessary to do a visual inspection for any damage that may have occurredduring transit. If the package or pallet are damaged or signs of possible...
Page 9 - Distance A
8 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE Sep 05 100646 4.3.1. FREELY ON THE FLOOR The machine is to be located on a not elevated leveled concrete floor that comply with static and dynamicstress of the machine. The friction coefficient must be higher then 0,5 between the rubber feet and...
Page 11 - THE MACHINE MUST RELIABLY REST IN ALL FOUR CORNERS OF THE MACHINE!
10 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE Sep 05 100646 6kg / 13lb 7kg / 16lb 10kg / 22lb 16kg / 36lb X1 660 mm / 25.98“ 660 mm / 25.98“ 660 mm / 25.98“ 830 mm / 32.7“ X2 560 mm / 22.05“ 560 mm / 22.05“ 560 mm / 22.05“ 715 mm / 28.1“ X3 50 mm / 1.97“ 50 mm / 1.97“ 50 mm / 1.97“ 57.5 mm...
Page 13 - MACHINE
12 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE Sep 05 100646 4.5. ELECTRICAL CONNECTION 4.5.1. GENERAL WARNING !THE MACHINE MUST BE CONNECTED TO THE POWER, GROUND, WATER, VENTILATION AND STEAMSUPPLY ACCORDING TO THE INSTALLATION MANUAL, IN COMPLIANCE WITH THE VALID LOCAL STANDARDSDONE BY QU...
Page 14 - Power supply
100646 PUBLICATION DATE Sep 05 INSTALLATION AND MAINTENANCE MANUAL 13 Supply cable of the machine must have copper wires. The cross section of the supply wires dependson the supply voltage and on the total electrical power input of the machine (see table 4.3). The supply cablesafety device against a...
Page 15 - WATER CONNECTION
14 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE Sep 05 100646 4.5.5. CHECKING ROTATION DIRECTION CHECK IF THE DRUM ROTATES FROM THE FRONT VIEW IN CLOCKWISE DIRECTION DURINGEXTRACTION. IF IT ROTATES IN OPPOSITE DIRECTION, DISCONNECT TWO PHASESOF THE CONNECTION FROM THE FREQUENCY INVERTER TO T...
Page 16 - HOT WATER; WATER CONSUMPTION; STEAM CONNECTION
100646 PUBLICATION DATE Sep 05 INSTALLATION AND MAINTENANCE MANUAL 15 HOT WATER When the machine is provided with a hot water inlet, we advise connecting this inlet to a hot water supplythat is set to 70°C / 158°F. The hot water supply needs to be large enough to provide the required hot waterfor th...
Page 18 - AIR VENT CONNECTION; DO NOT COVER OR CONNECT TO ANYTHING!; CONNECTION OF LIQUID WASHING SOAPS DOSING; DISCONNECT THE MACHINE SUPPLY POWER INLET BEFORE INSTALLATION.
100646 PUBLICATION DATE Sep 05 INSTALLATION AND MAINTENANCE MANUAL 17 AIR VENT CONNECTION WARNING! WATCH OUT, VAPOURS ESCAPE FROM THE MACHINE THROUGH THE AIR VENT OPENING! DO NOT COVER OR CONNECT TO ANYTHING! On the backside, the washers are provided with an air vent opening of O.D. 75 mm / 3".D...
Page 19 - CHECKING BEFORE PUTTING INTO SERVICE
18 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE Sep 05 100646 1. Terminals for connection liquid soap pumps 2. Neutral line 3. Soap signals Fig. 4.7.B. Electrical connection soap pumps 4.8. PREPARING THE MACHINE FOR OPERATION CHECKING BEFORE PUTTING INTO SERVICE 1. Make sure the transporting...
Page 20 - MAINTENANCE AND ADJUSTMENTS; CHECKING AND MAINTENANCE DAILY; CHECKING AND MAINTENANCE EVERY THREE MONTHS; CHECKING AND MAINTENANCE EVERY SIX MONTHS
100646 PUBLICATION DATE Sep 05 INSTALLATION AND MAINTENANCE MANUAL 19 5. MAINTENANCE AND ADJUSTMENTS WARNING ! ALWAYS FOLLOW SAFETY INSTRUCTIONS! DO NOT BYPASS ANY SAFETY DEVICES OR THEIRPARTS, ANY INTERFERENCE TO THE MACHINE FUNCTIONS AND CONSTRUCTION ARE PROHIBITED.BEFORE MAINTENANCE WORK DISCONNE...
Page 21 - ADJUSTMENT OF DOOR SEAL THRUST
20 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE Sep 05 100646 5.2. ADJUSTMENTS AND PART´S EXCHANGES ADJUSTMENT OF DOOR SEAL THRUST MACHINES 6kg / 13lb, 7kg / 16lb, 10kg / 22lb If there is a water leakage around the door it is necessary to find out if the problem has been caused dueto the doo...
Page 22 - REPLACEMENT OF DOOR RUBBER; DO NOT OPERATE THE MACHINE IF THIS FUNCTION DOESN’T WORK ANYMORE!
100646 PUBLICATION DATE Sep 05 INSTALLATION AND MAINTENANCE MANUAL 21 REPLACEMENT OF DOOR RUBBER MACHINES 6kg / 13lb, 7kg / 16lb, 10kg / 22lb 1. Open the door. Remove the door glass (Fig. 5.2.A, pos.3) with rubber (pos.2) from the stainless steel door (pos.5) by pushing it towards the drum. Do it ca...
Page 23 - REPLACEMENT / REGULATION OF THE BELT
22 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE Sep 05 100646 REPLACEMENT / REGULATION OF THE BELT WARNING! MAKE SURE THE MACHINE IS DISCONNECTED FROM POWER SUPPLY BY PULLING OUT THEPLUG FROM THE SOCKET. On a new machine and after a belt replacement, make an inspection of the belt tightness ...
Page 24 - WATER FILTERS; FUSES
100646 PUBLICATION DATE Sep 05 INSTALLATION AND MAINTENANCE MANUAL 23 WATER FILTERS Machines are equipped with filters on water inlets. It is necessary to clean up the filters occasionally to avoida prolongation of filling the machine with water. Intervals of cleaning depend on the quality of the wa...
Page 25 - TROUBLESHOOTING AIDS
24 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE Sep 05 100646 6. TROUBLESHOOTING AIDS 6.1. ERROR HANDLING The timer allows the full control of the washing machine. When an error occurs then automatically the machinewill go ov er to a safe state. With the diagnostic program you can determine ...
Page 28 - LIST OF RECOMMENDED SPARE PARTS
100646 PUBLICATION DATE Sep 05 INSTALLATION AND MAINTENANCE MANUAL 27 7. LIST OF RECOMMENDED SPARE PARTS Find more detailed information in the spare part manual for individual machines. PRI 340 055 051 Drain valve 3“ 230V PRI 340 020 035 2-way water inlet valve PRI 340 030 038 3-way water inlet valv...
Page 29 - PUTTING THE MACHINE OUT OF SERVICE
28 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE Sep 05 100646 8. PUTTING THE MACHINE OUT OF SERVICE 8.1. DISCONNECTING THE MACHINE 1. Disconnect the outer electric power supply from the machine. 2. Switch off the main switch located on the back of the machine. 3. Turn off the outer water or ...
