Marantz SR4000 - Manuals

Marantz SR4000 – Manual in PDF format online.

Manuals:

Manual

Manual Marantz SR4000

Summary

Page 2 - CAUTION; RISK OF ELECTRIC SHOCK; CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,; WARNING; NOTE TO CATV SYSTEM INSTALLER:

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol,within an equilateral triangle, is intended toalert the us...

Page 3 - READ BEFORE OPERATING EQUIPMENT

i IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality andsafety standards. There are, however, some installation and operationprecautions which you should be particularly aware of. 1. Read Instructions - All the safety and o...

Page 4 - ii

ii 19. Servicing-Do not attempt to service this video product yourselfas opening or removing covers may expose you to dangerousvoltage or other hazards. Refer all servicing to qualified servicepersonnel. 20. Damage Requiring Service-Unplug this video product from thewall outlet and refer servicing t...

Page 5 - iii

iii ENGLISH ...................................................... 1 FRANÇAIS .................................................. 19 SR4000U DFU cover 00.8.6, 0:51 PM Page 3 Adobe PageMaker 6.5J/PPC

Page 6 - ENGLISH; GENERAL INFORMATION; are trademarks of Dolby Laboratories.; Trademark acknowledgment

1 ENGLISH GENERAL INFORMATION This receiver is supplied including:– a remote control– 2 batteries for the remote control, size AA– a loop antenna– a wire antenna– this instruction booklet Clean the receiver with a soft, slightly dampened, lint-freecloth. Do not use any cleaningagents as they may hav...

Page 7 - CONTROLS; combination with VOLUME.

2 ENGLISH CONTROLS q P PO OW WE ER R O ON N//O OF FF F ..............Switches the receiver on and off. w ..........................................Sensor for the infrared remote control. e 3D SURROUND ...............Control light for virtual 3D surround. r HALL ................................Contro...

Page 8 - REMOTE CONTROL; AA; Remote control usage; This button is invalid.

3 ENGLISH REMOTE CONTROL Open the battery compartment of the remote controland insert 2 alkaline batteries, type A AA A (R06, UM-3). Remove batteries if they are flat orif the remote control is not going tobe used for a long time. Batteries contain chemical substances, so they shouldbe disposed of p...

Page 9 - digital; Switches to the next disc.; Remote control buttons

4 ENGLISH REMOTE CONTROL MUTE .............................Mutes the sound of the receiver. .....................................Switches the receiver to standby. PHONO, TUNER, CD, CDR/TAPE, TV, VCR,SAT, DVD .....................Switches the remote control to the commands of the differentproducts. S...

Page 10 - Multibrand / Universa; Programming the universal remote control

5 ENGLISH REMOTE CONTROL You can identify the universal remote control by theinscription Multibrand / Universa l . The universal remote control must be programmed to use thecodes for your appliances of different brands. This is done bykeying in a 4-digit code or by scanning the codes until thecorrec...

Page 11 - CONNECTORS

6 ENGLISH CONNECTORS Connectors Connectors name Connect to: 6.3 mm headphone socket q PHONES A headphone with a 6.3 mm plug. at the front Audio and video inputs w FRONT AV Audio and video out sockets of appliances such as video cameras at the front and game consoles. FRONT SPEAKERS e R, L Right and ...

Page 12 - CONNECTIONS; Audio connections; Digital Audio connections

7 ENGLISH CONNECTIONS Audio connections There are analogue and digital connectors available on someappliances. If possible use the digital connection; usually thiswill result in better sound quality. See “Reassigning a sourceselection” on how to use the digital connectors of thereceiver. Because of ...

Page 13 - Video connections

CONNECTIONS 8 ENGLISH Video connections CENTER REMOTE REMOTE CONT CONT. SUB WOOFER SUB WOOFER PRE - OUT OUT PRE PRE - OUT OUT CDR CDR / TAPE CD CD SA SAT TV VCR VCR SA SAT VCR VCR MON MON DVD DVD SURR. SURR. FRONT FRONT CENTER CENTER AM LOOP SUB - SUB - WOOFER WOOFER 6 CHANNEL 6 CHANNEL / DVD DVD IN...

Page 14 - The type plate is located on the rear of the receiver.; AM antenna; Turn the antenna for optimum reception.; FM antenna; Insert each wire of the antenna into one hole.; Antenna connections

9 ENGLISH CONNECTIONS The type plate is located on the rear of the receiver. 1 Check whether the mains voltage as shown on the typeplate corresponds to your local mains voltage. If it does not,consult your dealer or service organization. 2 Connect the mains cable to the wall socket. To disconnect th...

Page 15 - SYSTEM SETUP; Note: If you are not completely satisfied with the volume; SUBWOOFER; FRONT

10 ENGLISH SYSTEM SETUP General hints for positioning Avoid positioning the speakers in a corner or on the floor asthis will boost the bass tones too much. Placing the speakersbehind curtains, furniture, etc. will reduce the treble response.The listener should always be able to ”see” the speakers. E...

Page 16 - DISPLAY; Speaker diagram; Menu indication; Display

11 ENGLISH DISPLAY The display of the receiver is divided into 3 sections, whichare to be used for the following: Speaker diagram A rectangle with a letter in it shows that a speaker has beenselected in the setup menu. However, the subwoofer indicatorwill only light when a subwoofer signal is availa...

Page 17 - MENUS; You can exit the menu at any time by pressing MENU.; Menu structure; Stores radio stations automatically; Receiver menu

12 ENGLISH MENUS The receiver is equipped with a menu system. The menu isused for the setup of the receiver. The different menu optionsare related to each other in a logical way. Let’s assume youhave no center speaker connected, and therefore switched to . If you try to use , a message will be scrol...

Page 18 - SOURCE SELECTION; Reassigning a source selection; INPUT SELECTOR

13 ENGLISH SOURCE SELECTION When selecting a source by turning INPUT SELECTOR,the audio and video inputs with the corresponding name areactivated. The incoming signal is reproduced by all audio and– if the source includes a video signal – video outputs of thereceiver. Source selected .........Connec...

Page 19 - Recording from the digital output; Recording from a source

14 ENGLISH PLAYBACK, RECORDING 1 Press POWER ON / OFF to switch on the receiver. 2 Turn INPUT SELECTOR to select a source. → The name of the source is displayed. • You can select the FRONT AV input by pressing FRONT AV. 3 Start playback of the source as usual. • Turn VOLUME to adjust the volume. → a...

Page 20 - SURROUND SOUND; Surround sound settings

15 ENGLISH SURROUND SOUND Surround sound gives you a complete new listeningsensation. You will have the feeling of being in the middle ofthe action, because sound is coming from everywhere aroundyou. Look out for TV broadcasts, audio and video tapes anddiscs with the 3 or 1 marks which are encoded f...

Page 21 - TUNER; Note: Only valid numbers within the frequency range of the; Note: While searching for radio stations, the actual sensitivity; means the tuner is; Storing radio stations

16 ENGLISH TUNER You can search for radio stations by scanning the frequencyband. You can also key in the frequency of a known radiostation. If an FM station is being broadcast and received instereo, STEREO is shown. Searching for radio stations1 Turn INPUT SELECTOR to select the tuner. → is display...

Page 22 - Clearing station names

17 ENGLISH TUNER 1 Turn INPUT SELECTOR to TUNER to select the tuner. → is displayed. 2 Turn TUNER PRESET to select a preset radio station. → PRESET , the preset number and station are displayed. After programming radio stations, you might want to changetheir sequence. allows you to exchange the posi...

Page 23 - TECHNICAL DATA; Subject to modification without notice.; General; Output power, surround mode; Inputs; Wave range; Receiver

18 ENGLISH TECHNICAL DATA Subject to modification without notice. General Power consumption ....................................................≈ 195 WStandby power consumption...........................................< 2 WDimensions, w × h × d ...........................440 × 138 × 394 mm Weigh...

Page 24 - TROUBLESHOOTING; PROBLEM

19 ENGLISH TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION No sound VOLUME is not correctly adjusted. Adjust the VOLUME. Headphones are connected. Disconnect headphones. The wrong source is selected. Turn INPUT SELECTOR to select the correct source. No sound on the One speaker is wrongly connected. ...

Page 28 - VCR

42 Semp ...........................0183Sharp ...........................0192, 0120, 0413, 0066, 0184Shogun ........................0046Signature .....................0043Simpson .......................0213, 0214Sony.............................0027, 0138, 0107Soundesign ..................0205, 0207,...

Page 29 - SAT

43 Orion ............................0506, 0322, 0029, 0211Panasonic ....................0062, 0104, 0189, 0252, 0481Penney.........................0062, 0267, 0064, 0065, 0069, 0067, 0081 Pentax..........................0069, 0132Philco ...........................0062, 0506, 0236Philips ..............

Page 30 - iv; is a registered trademark.

iv Printed in Singapore 99 / 08 MIT 284W851250 3104 215 3618.1 is a registered trademark. COUNTRY COMPANY ADDRESS AUSTRALIA Scan audio Pty. Ltd. 4 Station Street, Thornleigh NSW 2120, Australia AUSTRIA Huber & Prohaska GmbH Taborstraße 95 / Ladestraße 1, Gebäude Hangartner, A-1200 Wien, Austria ...