Marantz MAR0076 - Manuals

1- 4 Installation Store TV channels First, select your language and country. & Select Menu Language in the INSTALLATION menu and press the OK key. é Use the cursor left/right to select your language and press the OK key. “ Select Country and press the OK key. ‘ Select the country where you are n...

1- 5 Installation Searching for and storing TV channels is done channel by channel.You must go through every step of the Manual Installation menu. Selection Mode is only present and lights up if the country selected also offers the channel option (C-channels for aerial channels, S-channels forcable ...

1- 6 Installation Give name It is possible to change the name stored in the memory or to assign aname to a TV channel for which a name has not yet been entered. Aname with up to 5 letters or numbers can be given to the programmenumbers 0 to 99. For example SUPER, BBC1,... Between 99 and 0, in the co...

1- 7 Installation Define Decoder/Descrambler programme numbers If a decoder or a descrambler is connected, see p. 20, you can defineone or more programme numbers as decoder programme numbers. & Select Decoder/Descrambler in the INSTALLATION menu and press the OK key. é Select the programme numbe...

1- 8 Installation The Setup menu allows you to adjust initial settings, i.e. those which arenot related to the installation of the TV channels.The Setup menu contains items that control the settings of the TV’sfunctions, features, services and peripherals you may have connected. & Select Setup i...

1- 9 Use of the remote control Operation MUTE CHANNEL VOLUME TV Keypad 1 2 3 4 5 6 7 8 9 i+ 0 P P Sub + Sub - Picture format Press this key repeatedly to select an other picture format: 4:3, Movie Expand 14:9, Movie Expand 16:9, with or without subtitles, SuperWide, WideScreen or AutoFormat. (When A...

Operation 1- 10 Use of the remote control MUTE CHANNEL VOLUME TV Adjustments Sub + Sub - OK DNR PP MUTE CHANNEL VOLUME TV Settings Sub + Sub - Picture Installation 5/9 7/9 DNR Digital Noise Reduction To reduce the image noise and improve the picture quality when receiving weak signals. Press this ke...

1- 11 Use of the remote control MUTE CHANNEL VOLUME TV TV Text 1 2 3 4 5 6 7 8 9 0 P P Sub + Sub - R G Y B MUTE CHANNEL VOLUME TV TV Text Sub + Sub - i i+ ? 2/9 3/9 TV Text Color keys The specific function of these color buttons is shown on screen in the TV Text mode R=Red G=Green Y=Yellow B=Blue TV...

1- 12 Use of the menus & Select “cursor” in the control menu on the remote control (TV mode) é Press the red, green or yellow colour key to display/cancel the PICTURE , SOUND or FEATURES menu. “ Use the cursor in the up/down directions to select a menu item. ‘ Use the OK key to activate. ( Press...

1- 13 Use of the menus Headphone See Connect peripheral equipment, p. 21, for the connection of theheadphone. • Select the source you want to listen to with your headphone: Automatic , TV , EXT1 , EXT2 or EXT3 (or the names entered in the Give Name menu). Select Automatic if you want to listen to th...

1- 14 Use of the menus Features menu & Select “cursor” in the control panel menu on the remote control (TVmode) é Press the yellow key to display/cancel the FEATURES menu. “ Press the cursor up/down to select a menu item. ‘ Press the OK key to activate. Sleeptimer With the sleeptimer you can set...

1- 15 Use of the menus Display messageSwitch the TV to standby.The message appears on the screen when the TV is switched on again.If you selected Once , the message will disappear from the screen after about 45 seconds.If you selected Continuous , the message will appear on the screen until the Run ...

1- 16 Dual screen & Press the b key to switch on Dual Screen. The TV screen will be divided in 2 different pictures.The picture on the left side is the selected TV channel or external.The picture on the right side is the picture from the TV channel in thefavourite programme list following or pre...

1- 17 Teletext Most TV channels broadcast information via teletext. Each channel which broadcasts teletext transmits a page withinformation on how to use its teletext system. Look for the teletext pagewith the main index (usually p. 100).Depending on the TV channel, teletext is transmitted in differ...

1- 18 Teletext Select the index teletext page Press the k key to display the main index (usually p.100). Only for T.O.P teletext broadcasts : T.O.P orders the pages in categories and adds other possibilities ofenhancing ease of use.Press i . A T.O.P. overview of the teletext subjects available is di...

1- 19 Connect Peripheral equipment Connect Peripheral Equipment There is a wide range of audio and video equipment that can beconnected to your receiver. The following connection diagrams showyou how to connect them to the back or the front side of the receiver. Note: in case of the monitor in a sta...

1- 20 Connect Peripheral equipment & Connect your camera or camcorder at the front side of your receiver. é Connect the equipment to VIDEO 2 and AUDIO L 1 for mono equipment. “ For stereo equipment also connect AUDIO R 1 . S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS...

1- 21 Connect your computer & Connect one end of a VGA cable supplied to the video card of thecomputer and the other end to the VGA MONITOR IN connector at the rear side of the receiver box or at the VGA IN connector 1 at the back of the monitor in case you have no receiver box connected to them...

1- 22 Connect your computer Daisy chaining The Active Loop Through facility makes it possible to make a daisychain. Connect the monitors (max. 2) before inserting the mains plug in the wall socket . Connect another VGA cable to the VGA OUT connector 1 at the back of the monitor and to the VGA IN con...

1- 23 Connect peripheral equipment If the monitor is connected to a video recorder with the EasyLinkfunction, in some cases the monitor will be switched on, even when itwas in standby. (E.g. playback tape,...)This is not possible when Child lock On is selected. Equipment connected with an aerial cab...

1- 24 Recording Ext2 Output To record S-VHS quality, connect an S-VHS peripheral directly to thevideo recorder.In this case go on as follows: & Select Setup in the INSTALLATION menu and press the OK key (“settings” control panel on the remote control). é Select Ext 2 Output with the cursor up/do...

1- 26 Glossary 100 Hz 100 Hertz provides a superior solutionto the problem of picture flicker whichis particularly noticeable with largerscreen sizes. In a conventional TV, the picture areais scanned 50 times a second (50 Hertz)– a frequency which is still detectableby the human eye in the form of a...