Marantz LN9101M - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFETY

2 The lightning ﬂash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “danger- ous voltage” within the product’s enclosure that may be of sufﬁcient magnitude to constitute a risk of electric shock to persons. 1. Read these instructions. 2. ...

Page 3 - Technical Assistance; ADDITIONAL SAFETY; THERE IS A POSSIBILITY OF SERIOUS; Customer Service

3 Technical Assistance If at any time you have questions about your Marantz product, contact your Marantz Dealer who is familiar with your Marantz equipment and any other brands that may be part of your system. If you or your Dealer wish additional help concerning a suspected problem, you can receiv...

Page 4 - Connector and Cable Information

4 6. The LN9101M Motorized Sled uses bearings made from specialized permanently lubricated materials. Keep the rail linear bearing clean, dry, and con- taminant free. Do not apply any lubricants to the Motorized Sled as this will gum up the mechanism and possibly produce a film on the projector and ...

Page 5 - Note: The EXT10 hardware, fasteners and parts list; Figure 1; Figure 2

5 The LN9101M Anamorphic Lens System is designed to mount together with the Marantz VP-11 onto the ceiling of a typical room. Before choosing the location on the ceiling, it is important to first read the “Installa- tion” section of the VP-11 User Guide. Some of the brackets from the Marantz MT20 (o...

Page 6 - EXT10 Assembly, con’t; Figure 6; Figure 4A; Top Adjustment Plate; Side View

6 Notes: Set aside the Lens, Lens Holder and Locking Ring as they will be used after the VP-11 Pro- jector/EXT10/MT20 have been installed and initial setup adjustment have been made. The actual Lens Holder Assembly is black in color. The above illustrations are shown for purposes of clarity. 4. Plac...

Page 7 - Plate 3; Tilting; Plate 3; rubber washer and steel washer

7 3. Install the combined Plates #1 and #2 (or Plate 1 with the EXT10) securely to the Building Structure following all of the Local Building/Con- struction Codes. Use suitable hardware in ad- equate quantity and size depending on the installa- tion requirements. Caution: The Projector together with...

Page 9 - Note: At this time, do not be overly concerned about

9 turns. Place the removed cover in a safe place for possible future use. 3. The inner circumference of the Lens Holder is threaded to accept the Lens. It is ex- tremely important not to cross thread the Lens or Lens Holder when start- ing the fastening process and do not over tighten. Refer to figu...

Page 10 - LN9101M Lens Alignment, con’t; Trigger 2 Normal - Off; Specifications; carton

10 3. Press the LENS IN Push-button on the Remote Control and the Lens will travel to a position in front of the projector Lens. Verify the horizon- tal center of the LN9101M Lens coincides with the horizontal center of the projector Lens. If the LN9101M Lens doesn’t line up, loosen the screws on th...

Page 11 - Limited Warranty; Remote Control Devices, Universal Dock & DLP Front

® For U. S. A . Limited Warranty Marantz America, Inc. (“Marantz”) warrants the following Marantz Products for the periods indicated: 1. The following Marantz Audio/Video components, have a 3 year warranty for both Parts & Labor, from the original purchase date: Amplifiers, Pre Amplifiers, Pre A...

Page 12 - is a registered trademark.

www. marantz.com You can find your nearest authorized distributor or dealer on our website. U. S. A. Marantz America, Inc. 100 Corporate Drive, Mahwah, NJ 07430, U. S. A. ® is a registered trademark. Printed in U. S. A. Part No. 04104000 06/2007