Makita HP2071 - Manuals - manualsarea.com

Page 2 - SPECIFICATIONS; GENERAL SAFETY RULES; Read and understand all instructions.; Failure to follow all; SAVE THESE INSTRUCTIONS; Work Area; Electrical Safety

2 SPECIFICATIONS • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA002-2 (For All Tools) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in...

Page 4 - SERVICE; SPECIFIC SAFETY RULES

4 22. Use only accessories that are recom-mended by the manufacturer for yourmodel. Accessories that may be suitable for one tool, may become hazardous when usedon another tool. SERVICE 23. Tool service must be performed only byqualified repair personnel. Service or main- tenance performed by unqual...

Page 6 - Switch action

6 FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off andunplugged before adjusting or checking function on thetool. Switch action CAUTION: • Before plugging in the tool, always check to see that theswitch trigger actuates properly and returns to the “OFF”position when rel...

Page 7 - Lighting up the lamps; Reversing switch action; Speed change

7 Lighting up the lamps For Model HP2070F, HP2071F CAUTION: • Do not look in the light or see the source of light directly. To turn on the lamp, pull the trigger. Release the trigger toturn it off. NOTE: • Use a dry cloth to wipe the dirt off the lens of lamp. Becareful not to scratch the lens of la...

Page 8 - Selecting the action mode; ASSEMBLY

8 CAUTION: • Use the speed change knob only after the tool comes toa complete stop. Changing the tool speed before the toolstops may damage the tool. • Always set the speed change knob to the correctposition. If you operate the tool with the speed changeknob positioned halfway between the “I” and “I...

Page 9 - Installing or removing drill bit; Depth gauge

9 Installing or removing drill bit For Model HP2070, HP2070F To install the bit, place it in the chuck as far as it will go.Tighten the chuck by hand. Place the chuck key in each ofthe three holes and tighten clockwise. Be sure to tighten allthree chuck holes evenly.To remove the bit, turn the chuck...

Page 10 - OPERATION; Hammer drilling operation; Drilling operation; Drilling in wood

10 OPERATION Hammer drilling operation CAUTION: • There is a tremendous and sudden twisting forceexerted on the tool/bit at the time of hole break-through,when the hole becomes clogged with chips andparticles, or when striking reinforcing rods embedded inthe concrete. Always use the side grip (auxil...

Page 11 - Drilling in metal; MAINTENANCE; Indicator lamp

11 Drilling in metal To prevent the bit from slipping when starting a hole, makean indentation with a center-punch and hammer at the pointto be drilled. Place the point of the bit in the indentation andstart drilling.Use a cutting lubricant when drilling metals. The exceptionsare iron and brass whic...

Page 12 - Cleaning vent holes; ACCESSORIES

12 Cleaning vent holes The tool and its air vents have to be kept clean. Regularlyclean the tool’s air vents or whenever the vents start tobecome obstructed. To maintain product SAFETY and RELIABILITY, repairs, car-bon brush inspection and replacement, any other mainte-nance or adjustment should be ...

Page 14 - MAIL THIS PORTION; Your answers to the following questions are appreciated.; Please return this portion by facsimile or mail.

14 1. This product was purchased from: Home Center Hardware/Lumber Store Tool Distributor Industrial Supply Construction Supply Other ( ) 3. How did you learn about this product: Magazine From Dealer Newspaper Store Display Catalog Radio Exhibition From Friend Previous Usage Other ( ) 2. Use of the ...

Page 15 - FACTORY SERVICE CENTERS; RETAIN THIS PORTION FOR YOUR RECORDS

15 FACTORY SERVICE CENTERS 1-800-4-MAKITA RETAIN THIS PORTION FOR YOUR RECORDS ARIZONA 3707 E. Broadway Rd., Ste. 6 Phoenix, AZ 85040 (602) 437-2850 CALIFORNIA 41850 Christy St. Fremont, CA 94538-5107 (510) 657-9881 14930 Northam St. La Mirada, CA 90638-5753 (714) 522-8088 1970 Fulton Avenue Sacrame...

Page 16 - WARNING; MAKITA LIMITED ONE YEAR WARRANTY; Warranty Policy; Makita Corporation

WARNING Some dust created by power sanding, sawing, grinding, drilling, and otherconstruction activities contains chemicals known to the State of Californiato cause cancer, birth defects or other reproductive harm. Some examplesof these chemicals are:• lead from lead-based paints, • crystalline sili...