Magnadyne RV4000 - Manuals

Magnadyne RV4000 – Manual in PDF format online.

Manuals:

Manual

Manual Magnadyne RV4000

Summary

Page 3 - Button Locations and Functions; Reset Button: Press to reset the unit to it’s default settings.

Button Locations and Functions 3 1. Power On/Off: Press to turn the unit on or off. 2. Disc Door: To play a disc, insert the disc with label facing forward. 3. Disc Door Release: Press to open the door so the disc can be inserted. 4. Auxiliary Button (AUX): Press to choose auxiliary audio in mode. 5...

Page 4 - ferent levels of display area lighting.

4 Button Locations and Functions (Continued) 16. Dimmer Button (DIM): Press to dim the lighting in the display area. Sequential presses will select dif- ferent levels of display area lighting. 17. Radio Preset Button (6): Recalls a memorized radio station, and programs a radio station into memory. 1...

Page 5 - General Operations; Selecting a Play Source:; Sound Controls; Press the POWER button to turn the unit On/Off.

5 General Operations Selecting a Play Source: To select a play source, press one of the follow-ing mode buttons: AUX (Auxiliary Audio Input), AM/FM (AM or FM Radio Band) or DISC (Music) Dimming the Display: Press the DIM button to select the desired level of brightness for the display area. Display ...

Page 6 - Bass, Treble and Balance Control; r 7 = Right speaker only; Hold

6 Sound Controls Bass: Select the Bass mode by pressing the VOLUME knob. Increase the Bass by rotating the VOLUME knob clockwise. Decrease the Bass by rotating the knob counterclockwise. After 6 seconds control reverts back to volume control. Bass, Treble and Balance Control Select the desired sound...

Page 7 - Selecting Speaker Sets:; • Press the A button to toggle speaker set A on; Setting the Clock; Press the DISP button until the clock appears in; number starts flashing.; Rotate the VOLUME knob until the correct Hour

7 Sound Controls (Continued) Mute: Press the button to mute the volume level. Press the button again to restore the volume. Speaker Selection Selecting Speaker Sets: • Press the A button to toggle speaker set A on and off. “SPK A” appears in the display when speaker set A is on. • Press the B button...

Page 8 - Sleep Timer Operation; Setting the Sleep Timer:; appears in the display.; Cancelling the Sleep Timer:; tors will start flashing.

8 Sleep Timer Operation Setting the Sleep Timer: 1. Press the SLP button until the “SLP 10” appears in the display. 2. Keep pressing the SLP button again until the desired sleep time appears in the display (00, 10, 20, 30, 40, 50, 60, 70, 80 minutes). 3. Wait 5 seconds and the display will return to...

Page 9 - Alarm Operation; Setting the Alarm Timer:; Hour appears in the display. “ALM” will; Cancelling the Alarm Timer:

9 Alarm Operation Setting the Alarm Timer: 1. Press the ALM button and the clock will appear in the display with the hour number flashing. 2. Rotate the VOLUME knob until the correct Hour appears in the display. “ALM” will appear in the display indicating the alarm is activated. Note 1: When setting...

Page 10 - Radio Operations; Selecting the Play Source:; Memorizing Radio Stations:

10 Radio Operations Selecting the Play Source: Press the AM/FM button and “rAdIO” appears in the display. After a brief moment either AM or FM will appear in the display. Selecting the AM or FM: Press the AM/FM button repeatedly and select from FM 1, FM 2, FM 3, AM 1 or AM 2. Seek Tuning in a Radio ...

Page 11 - Disc Warnings; DVD; Handling and Cleaning:; Radio Operation; Scanning Stored Radio Stations:; Automatically Store Radio Stations:; Note: When the FM band is selected the 18 stron-

11 Disc Warnings DVD 12cm disc (Single-sided disc only) CD 12cm disc MP3 12cm disc Label side up Do not touch the underside of the disc Do not bend Wipe the disc from the center toward the outside edge Rough spots on outside edge Rough spots on inside edge Ball point pen or pencil Handling and Clean...

Page 12 - Music Disc Operation; Insert the disc onto the hub with the; label facing forward. Use your thumb to; Press the DISC button and “LOAd” will; appear in the display. The disc will auto-; Music Track Selection:; Press the l; The track number will appear in the display.; Track Number

12 Music Disc Operation General Operations: 1. Push the door access the disc player. 2. Insert the disc onto the hub with the label facing forward. Use your thumb to make sure the disc snaps onto the hub. 3. Press the DISC button and “LOAd” will appear in the display. The disc will auto- matically s...

Page 13 - Push the door to access the disc player.; Wait until the disc stops spinning before; Use your finger to remove the disc from; Press the; ll button to pause the disc, press it; again to resume play.

13 Music Disc Operation (Continued) Removing the Disc: 1. Push the door to access the disc player. Wait until the disc stops spinning before opening up the door. 2. Use your finger to remove the disc from the hub. 3. Close the door. Pausing the Disc: Press the � ll button to pause the disc, press it...

Page 14 - MP3 Disc Operation; The file number will appear in the display.; File Number

14 MP3 Disc Operation General Operations: 1. Push the door access the disc player. 2. Insert the disc onto the hub with the label facing forward. Use your thumb to make sure the disc snaps onto the hub. 3. Press the DISC button and “LOAd” will appear in the display. The disc will auto- matically sta...

Page 16 - Audio Input; Selecting the Audio Input Source:; Note 1: The RV4000 does not control the device,; you plug a device into the front audio input jack; Headphone Output; Plugging in Headphone:

16 Audio Input Selecting the Audio Input Source: Note 1: The RV4000 does not control the device, it just allows the audio to be played through the system.Note 2: If the rear audio input is being used once you plug a device into the front audio input jack the audio will be diverted to playing the fro...

Page 17 - Area Radio Frequency Adjustment:

17 The LCD display may fail to function normally due to the vehicle’s battery condition, and could require resetting the radio microprocessor if: • The vehicle has been “jump started” from a dead battery condition. • The vehicle battery becomes very low and is quick-charged. • The vehicle battery is...

Page 18 - Installation; Chassis Opening; Caution: Do not install radio without rear cover installed:

18 Installation 9 4 5 / 8 ” 6 1 / 4 ” Chassis Opening Structural Stud Wall Panel Caution: Do not install radio without rear cover installed: No user-serviceable parts inside. Rear cover provides protection against potential fire hazard. 9 3 / 4 ” Trim Ring 3 / 8 ”

Page 19 - Speaker Connections; Brown Wire

19 Speaker Connections _ + Gray Wire White/Black Wire (Common -) _ + Gray/Black Wire Right Speaker B Left Speaker B _ + Brown/Black Wire White Wire (Common -) _ + Brown Wire Right Speaker A Left Speaker A

Page 20 - Wiring and Auxiliary Connections; Black Wire Ground; Music Disc Player

20 Wiring and Auxiliary Connections Red Wire (+) to 12 Volt DC Power Black Wire Ground Music Disc Player (Optional) Audio In Audio Out 10A Fuse External Automotive Type Antenna (Optional) In-Dash Unit (Optional)

Page 21 - Outdoor Antenna Grounding:; operating instructions or as marked on the appliance.; Safety Instructions

21 Outdoor Antenna Grounding: If an outside antenna is connected to the receiver, be sure the antenna system is grounded, so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electrical Code, ANSI/NFPS No. 70-1983, provides information with...

Page 22 - Warranty

22 Warranty ONE (1) YEAR LIMITED WARRANTY Magnadyne Corporation or its authorized agents will within one year from the date of sale to you, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized agents, if sa...