Magnadyne EAX540 - Manual
Magnadyne EAX540 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – HOW TO USE THE MAGAZINE; Loading a disc
- Page 4 – PRECAUTIONS FOR HANDLING DISCS; With new discs; WARNING
- Page 6 – BEFORE INSTALLING THE UNIT; Transport Lock Screws
- Page 7 – Position of the built-in anti-vibration board; For use when unit is installed horizontally or suspended:; For use when unit is installed vertically:; For use when unit is installed at a 45
- Page 8 – INSTALLATION; Procedure for Installation on Carpet (Horizontal Position)
- Page 9 – Procedure for Installation on Carpet (Vertical Position)
- Page 10 – Procedure for Installation on Carpet (at a 45
- Page 11 – Procedure for Installation (Suspended Position)
- Page 12 – Symptom
Installation
and Operations
Manual
R
U.S. Patent No. D486,815
EAX540
COMPACT DISC AUTO CHANGER
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 HOW TO USE THE MAGAZINE Loading a disc 1. Pick the tab on the magazine’s disc tray and pull out only of the trays. 2. Place the disc on the tray with its play surface facing down (label surface facing up).• Each tray can accommodate only one disc. 3. Press the tab on the disc tray to store the tra...
4 PRECAUTIONS FOR HANDLING DISCS With new discs The symptoms described belowsometimes occur when new discsare used:• The disc is not played even when it is loaded. • Operation changes to the next disc before the first disc has achance to be played. • The same disc is played over and over again. • Th...
6 BEFORE INSTALLING THE UNIT Transport Lock Screws The mechanism in the CD changer is“locked” into place during shipment bythe transport screws.Be sure to remove the screws prior toinstallation. CautionAfter removing the transport lock screws, place the supplied seals over the screwholes.These seals...
