Page 3 - Docking Station Functions
3 Docking Station Functions 1. FM Transmitter Adjustment Button: Push the (-) button to tune to a lower radio frequency, press the (+) button to tune to a higher radio frequency. 2. FM Transmitter LCD Display: Displays the audio transmission frequency. 3. Dome Light Button: Press to turn on or off t...
Page 4 - Inserting an IPAD or IPAD 2 into the Overhead Housing; Note 1: Make sure the IPOD dock connector is out
Release Button 4 Inserting an IPAD or IPAD 2 into the Overhead Housing 3 4 5 2 1 7 6 9 10 8 3 4 5 2 1 7 6 2. Slide open the docking housing access door. 3 4 5 2 1 7 6 9 10 8 3 4 5 2 1 7 6 3. Next rotate the housing access door until it locks in the vertical position. Note 1: Make sure the IPOD dock ...
Page 5 - Inserting an IPAD or IPAD 2 into the Overhead Housing (continued)
5 5. Slide the IPAD into the housing. Warning: The IPAD’s HOME button must be on the left side when inserting the IPAD. Inserting the IPAD incorrectly will damage the docking station. Home Button 4. Adjust the volume level of the IPAD to 100%. Volume Button 3 4 5 2 1 7 6 9 10 8 3 4 5 2 1 7 6 3c. The...
Page 6 - Note: Tuck the USB power plug cord under the; Note: Make sure the IPOD dock connector is not in
6 3 4 5 2 1 7 6 9 10 8 3 4 5 2 1 7 6 7. Connect the IPOD dock connector. Warning: IPOD dock connector can only be inserted one way. The icon on the connector must be facing forward. Inserting the IPOD dock connector incor- rectly will damage the connector or IPAD. Note: Tuck the USB power plug cord ...
Page 7 - Removing an IPAD from the Overhead Housing; Slide open the docking housing access door.
7 Removing an IPAD from the Overhead Housing 3 4 5 2 1 7 6 9 10 8 3 4 5 2 1 7 6 1. Slide open the docking housing access door. 3 4 5 2 1 7 6 9 10 8 3 4 5 2 1 7 6 2. Rotate the housing access door and unplug the IPOD dock connector. 3. Slide the eject button up and remove the IPAD. 4. Close the acces...
Page 8 - Basic Operation and Function; Turning the Docking Station On:; Adjusting the Overhead Housing
8 Basic Operation and Function Turning the Docking Station On: Press the power button to turn the unit on. 3 4 5 2 1 7 6 9 10 8 3 4 5 2 1 7 6 Dome Lights: Manually turn on/off the dome lights by pushing the dome light button.Note: The dome lights will automatically illuminate whenever the vehicle do...
Page 9 - Headphone Operation; Playing Audio Through the Vehicle’s Radio:
9 IR Repeater The audio signal is converted to an infrared light and transmitted to the headphones (purchased sepa- rately). Refer to the owner’s manual included with the headphone on how to adjust the volume to suit the listener’s taste. Note 1: Volume level of the IPAD should be set to 100%. If th...
Page 10 - Wiring
10 Wiring Power Harness Wiring: The 4-wire harness provides battery and ignition (12 volts DC) as well as a chassis ground. Route the power harness to the point in the vehicle that you will make the connections. Red Wire: The red wire in the harness should be con- nected to a +12 volt power wire tha...
Page 11 - Warning: Take extra care not to penetrate the roof of
11 Installation Specification The MV-IPAD must be mounted using a universal shroud/bracket system (purchased separately). 1. Using the screws provided with the universal shroud/bracket system attach the MV-IPAD docking system to the universal shroud. 2. Refer to the instructions included with the sh...
Page 12 - Warranty
MV-IPAD2-UM Rev. A 5-18-11 © Copyright 2011 Magnadyne Corporation ONE (1) YEAR LIMITED WARRANTY Magnadyne Corporation or its authorized agents will within 1 year from the date of sale to you, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the M...