Magnadyne MRC-2U - Manuals

6 Wiring Diagram Antenna Wire Do Not Cut or Connect Green LED (Speed-Up) Red LED (Slow-Down) Red Wire +12 Volt Switch Black Wire Ground Infrared Emitter Attach to radio’s infrared receiver. Note: Receiver’s housing is not waterproof and must be mountedin a dry location.

Manufacturer Group Sub-Group Radio 1 Alpine 2 JVC 3 Pioneer 1 MobileVision and MB Quart 2 Kenwood 1 Sony Flashes the Number of Times the Switch is Pressed, Confirming Group Number 7 Step 1 Turn on the power to the receiver’shousing. Press and hold the button on the receiver for 3 seconds. The LED on...

10 Step 1 Turn on the power to the receiver’shousing. Press and hold the button on the receiver until the LED turnson solid. Step 2 Solid LED Learning an Additional Aquavibe Marine Remote Controller Code Hold While still pressing the button on the receiver, press and release the SRC button on the re...

Step 1 Turn on the power to the receiver’shousing. Press and hold the button on the receiver until the LED turnson solid then release button. Step 2 Solid LED Clearing All the Aquavibe Marine Remote Controller Codes Hold Push the receiver button 2 more times, holding on the lastpush. The LED will fl...

© Copyright 2008 Magnadyne Corporation MRC-2U-IM/UM Rev. A 4-28-08 Warranty ONE (1) YEAR LIMITED WARRANTY Magnadyne Corporation or its authorized agents will within one year from the date of sale to you, repair, replace or refund the retail sales price of said product or any part thereof, at the opt...