Magnadyne EAX540 - Manuals - manualsarea.com

Page 3 - HOW TO USE THE MAGAZINE; Loading a disc

3 HOW TO USE THE MAGAZINE Loading a disc 1. Pick the tab on the magazine’s disc tray and pull out only of the trays. 2. Place the disc on the tray with its play surface facing down (label surface facing up).• Each tray can accommodate only one disc. 3. Press the tab on the disc tray to store the tra...

Page 4 - PRECAUTIONS FOR HANDLING DISCS; With new discs; WARNING

4 PRECAUTIONS FOR HANDLING DISCS With new discs The symptoms described belowsometimes occur when new discsare used:• The disc is not played even when it is loaded. • Operation changes to the next disc before the first disc has achance to be played. • The same disc is played over and over again. • Th...

Page 6 - BEFORE INSTALLING THE UNIT; Transport Lock Screws

6 BEFORE INSTALLING THE UNIT Transport Lock Screws The mechanism in the CD changer is“locked” into place during shipment bythe transport screws.Be sure to remove the screws prior toinstallation. CautionAfter removing the transport lock screws, place the supplied seals over the screwholes.These seals...

Page 7 - Position of the built-in anti-vibration board; For use when unit is installed horizontally or suspended:; For use when unit is installed vertically:; For use when unit is installed at a 45

7 Position of the built-in anti-vibration board This unit can be installed horizontally (suspended), vertically, and at a 45 ° angle. Once the installation position has been decided, it’s necessary to set the position ofthe built-in anti-vibration board inside the unit. Please do this before perform...

Page 8 - INSTALLATION; Procedure for Installation on Carpet (Horizontal Position)

8 INSTALLATION Procedure for Installation on Carpet (Horizontal Position) 1 2 3 4 5 • Confirm that the built-in anti-vibration boards on both the leftand right sides are set to the horizontal installation position “0”. • Attach the left and right brackets (A) using the hexagonal bolt (M4 x 5). • Att...

Page 9 - Procedure for Installation on Carpet (Vertical Position)

9 INSTALLATION Procedure for Installation on Carpet (Vertical Position) 1 2 3 4 5 • Set that the built-in anti-vibration boards on both the left and right sides are set to the vertical installation position “90”. • Attach the left and right brackets (A) using the hexagonal bolt (M4 x 5). • Attach th...

Page 10 - Procedure for Installation on Carpet (at a 45

10 INSTALLATION Procedure for Installation on Carpet (at a 45 ° angle) 1 2 3 4 5 • Set the built-in anti-vibration boards on both the left and right sides to the 45 ° installation position “45 ° ”. • Attach the left and right brackets (A) using the hexagonal bolt (M4 x 5). • Attach the left and righ...

Page 11 - Procedure for Installation (Suspended Position)

11 INSTALLATION Procedure for Installation (Suspended Position) 1 2 3 • Confirm that the built-in anti-vibration boards on both the leftand right sides are set to the horizontal installation position “0”. • Attach the left and right brackets (A) using the hexagonal bolt (M4 x 5). • Determine the mou...

Page 12 - Symptom

EAX540-UM 6-29-07 12 HANDLING THE DISCS Dirt, dust, scratches and warpage cause sound skips during playback and a deterioration of sound quality. How to take care of your disc: 1. Use compact discs that have the mark shown on the right. 2. Fingerprints and dust should be carefully wiped off the disc...