M-Audio LX4 - Manuals - manualsarea.com

Page 2 - Introduction; Your Studiophile LX4 box contains:

Introduction Thank you for choosing the Studiophile Series LX4-2.1 / 5.1 studio nearfieldmonitor speakers. M-Audio is well known for digital audio interface technology,digital converters, audio preamps and mixers. Now, born from extensiveresearch and development, the Studiophile LX4-2.1 System and 5...

Page 3 - Studiophile LX4 Surround System Features; - the Satellite Speaker’s woofer units are 4 inches in

Studiophile LX4 Surround System Features 1. Satellite Woofer - the Satellite Speaker’s woofer units are 4 inches in diameter with a magnetically shielded mineral-filled polypropylene cone, high-temperature voice coil and damped closed cell foam surround. It is designed todeliver balanced mid- and lo...

Page 4 - Speaker Enclosure Front and Rear Panel Features; These jacks accept 1/4” connections with either balanced or; TRS TIP; - Low Frequency Effect Input

Speaker Enclosure Front and Rear Panel Features LX4-2.1 Subwoofer, Rear 1. TRS Inputs: These jacks accept 1/4” connections with either balanced or unbalanced wiring. For balanced wiring, a three-conductor TRS plug isnecessary. The input wiring of a TRS connector should be as follows: TRS TIP - Signa...

Page 6 - Please do not touch the speaker cones. The LX4-2.1 speaker set is; Correct Power Operation:

LX4 Satellite Speaker, Rear The rear panel of each Satellite Speaker houses a single pair of spring-typespeaker terminals. LX4 Satellite Speaker, Front The front panel of each LX4 Satellite Speaker houses single Woofer andTweeter drivers. Installation - LX4-2.1 System For optimal performance of the ...

Page 8 - Please do not touch the speaker cones.The LX4-5.1 expander set is

Connecting to Preamp, Computer or Game Console Outputs Before connecting, make sure the output device’s power has been turned off.Plug the TRS balanced or TS unbalanced cable to the corresponding outputconnectors of a pre-amplifier, computer or game console. Installation - LX4-5.1 Expander For optim...

Page 9 - Speaker Wire Connections

Speaker Wire Connections Use speaker wires included in LX4-5.1 Expander package to connect the SL(Surround Left), SR (Surround Right) and C (Center) Speaker output terminals,found on the Subwoofer’s rear panel, to the SL, SR and C Speakers. Placing the Speakers - LX4-2.1 System Placing the speakers ...

Page 11 - This helps to minimize localization effects.

Placing the Speakers - LX4-5.1 Expander Placing the speakers is one of the most important procedures in order tomonitor sound accurately. To monitor with the LX4s performing to theirmaximum capability, an appropriate listening environment and correct placementare required. Please refer to the follow...

Page 12 - Technical Support & Contact Information

Technical Support & Contact Information For additonal help, contact M-Audio Technical Support by telephone (626-445-8495,9-5 PST M-F), by fax (626-445-7564) or by e-mail ([email protected]).If you have any questions, comments or suggestions about this or any M-Audioproduct, we invite you to c...

Page 13 - Warranty Terms; Warranty Registration

Warranty Terms M-Audio warrants products to be free from defects in materials andworkmanship, under normal use and provided that the product is owned by theoriginal, registered user. Visit www.m-audio.com/warranty for terms andlimitations applying to your specific product. Warranty Registration Than...

Page 14 - Appendix A - Technical Specifications; Crossover Frequencies:

Appendix A - Technical Specifications Type: 3-way studio reference with subwoofer (2.1 System), expandable to 5.1 Subwoofer Driver: 8 inch diameter, specially-developed curved-profile pulp cone, high-temperature voice coil and damped closed cell foam surround - designed for sub-frequency pressure le...

Page 15 - Appendix B - Block Diagram