LXE VX-7 - Manuals

Environmental Specifications Feature Specification Operating Temperature Standard version -4°F to 122°F (-20°C to 50°C) [non-condensing] Extended Temperature version -22º to 122º F (-30ºC to 50ºC [condensing] Storage Temperature Standard version -22°F to 140°F (-30°C to 60°C) [non-condensing] Extend...

Quick Start This section’s instructions are based on the assumption that your new system is pre- configured and requires only accessory installation (e.g. antenna, external keyboard and/or barcode scanner) and a power source. Use this guide as you would any other source book -- reading portions to l...

Note: When the internal antenna option is ordered, the internal antenna is mounted on the inside of the Access Panel Cover. Note: COM1 is configured with Pin 9 +5V. COM3 is labeled “COM2/3” and is configured with Pin 9 RI. Please see the VX7 Reference Guide for details. The Full-Screen Display The V...

the Operating System and the Documents and Settings. The VX7 does not operate without this card installed. The CF card is not hot swappable. One Secure Digital (SD) slot is provided for SD memory cards. The SD card is hot swappable. Please see the “VX7 Reference Guide” for more details on the PCMCIA...

between one application and another. Data entry affects the application running in the foreground only. Note that the system administrator may have assigned a different key sequence to use when switching applications. Note: The hotkey method can still be used if the touchscreen on the VX7 is disable...

Windows keys) and includes an integrated pointing device and left and right mouse buttons. However, because the keyboard only has 95 keys, all functions are not visible (or printed on the keyboard). Therefore the VX7 keyboard supports what is called hidden keys -- keys that are accessible but not vi...

• Maximum intensity • Medium intensity • Low intensity. Pointing device The mouse pointer may not always be visible. Please see “Touchscreen and Mouse” later in this manual for more details. The 60-key QWERTY Keyboard The 60-key keyboard has 101 keyboard functions, including a numeric keyboard pad. ...

these power management modes. • <2nd> <F4> and <2nd> <F5> – The Display Brightness functions are not used as the display brightness is adjusted by the buttons on the VX7 control panel. • <2nd> <F6> and <2nd> <F7> – The Contrast functions are not used a...

Secondary Keys LED The keyboard is equipped with several secondary keys. These keys are identified by the superscripted text found on the keyboard keys. The secondary keys are accessible by using two (2) keystrokes: the <2 nd > key followed by the superscripted key. Once the <2 nd > stat...

General Windows CE .NET Keyboard Shortcuts Use the keyboard shortcuts in the chart below to navigate with any VX7 keyboard. These are standard keyboard shortcuts for Windows CE .NET applications. Press these keys … To … CTRL + C Copy CTRL + X Cut CTRL + V Paste CTRL + Z Undo DELETE Delete SHIFT with...

Enabling the Input Panel The Input Panel is disabled by default. To enable the Input Panel, select Start | Settings | Control Panel |Input Panel icon. Make sure the “Allow applications to change the input panel state” checkbox is checked and warmboot the VX7. Power Supply Vehicle power input for the...

Backup Battery The internal 190 mAh Lithium backup (coin cell) battery provides power to maintain date and time when the VX7 is not powered from an external source. Caution • Danger of explosion if battery is incorrectly replaced. • Replace only with the same type or equivalent type recommended by t...

Accessories The table below lists the available VX7 accessories. • Where two parts numbers are listed for a given part, the part number ending in “-R” is the RoHS compliant version. • When only one part number is listed, the part is RoHS compliant unless otherwise noted. VX7 Brackets Bracket, U Styl...

Installation Install Mounting Brackets Caution: This device is intended to transmit RF energy. For protection against RF exposure to humans and in accordance with FCC rules and Industry Canada rules, this transmitter should be installed such that a minimum separation distance of at least 20 cm (7.8 ...

RAM Mount System Components RAM Mounting Assembly The RAM mounting assembly consists of the following parts: 1. VXX RAM ball bracket 2. RAM arm, size D 3. RAM ball base - or - RAM clamp mount RAM Clamp Mount includes: Upper Clamp Piece with Ball Lower Clamp Piece Bolts (2 each) Nylon locking nuts (2...

4. Hardware (not shown): Screws, 8-32x5/8 (4 each) for use with the 95 key keyboard Screws, 10-32x5/8 (4 each) for use with the 60 key keyboard Bolts, 1/4-20x5/8 (3 each) Washers, 1/4 locking (3 each) Washers, 1/4 flat (3 each) Torque Measurements You will need a torquing tool capable of torquing to...

Step 1b – Mount Vehicle RAM Clamp Mount Note: If you are using the RAM ball base, complete Step 1a and skip Step 1b. 1. Determine the position for mounting the RAM clamp mount. The clamp mount can be used on a beam (such as on a fork lift truck) up to 2.5” (63.5 mm) wide and approximately 2” (50.8 m...

Step 3 – Assemble Optional Keyboard Brackets 1. If using the optional integrated keyboard mount, attach the keyboard mounting bracket to the RAM mounting bracket with three 1/4-20x5/8 bolts, using one flat washer and one locking washer per bolt. Place the locking washer on the bolt before the flat w...

U-Bracket Mount System Components Bottom Mounting Bracket This bracket is mounted to the vehicle. The VX7 can be mounted to the bottom mounting bracket with or without an integrated keyboard mounting bracket. Additionally, the UPS battery pack may be mounted to the bottom mounting bracket. If the op...

Procedure Step 1 - Mount Bottom Mounting Bracket To Vehicle. 1. Position the bracket to allow access to the switches and ports on the bottom of the VX7. 2. Attach the bottom mounting bracket to the vehicle mounting surface using a minimum of four 1/4 bolts (or equivalent) fasteners. Note:1/4 Bolts a...

Step 4 – Assemble Optional Keyboard Brackets 1. Fasten the keyboard to the keyboard mounting plate. Use four 8-32x5/8 screws to attach the 95-key keyboard. Use four 10-32x5/8 screws to attach the 60-key keyboard. Note Excess keyboard cable length can be looped around the hooks on the bottom of the k...

To remove the protective film, slide the protective film in one direction until the edge clears. Lift up on the edge of the film so it does not slide between the touchscreen and display housing when slid back. Repeat until all edges are free and remove the protective film. Remote LXE Keyboard Bracke...

UPS Battery Pack Remote Mount The optional UPS battery pack must be mounted remotely when using the RAM mount system or a U-bracket designed for a previous model LXE computer. The remote mount can also be used with the VX7 U-bracket assembly if it is not convenient to mount the UPS battery pack to t...

PS/2 Keyboard and Mouse By using the optional dongle cable, a standard PS/2 keyboard and mouse may be attached to the VX7. 1. Turn the VX7 off before attaching the keyboard dongle cable. 2. Insert the 9-pin connector end of the dongle cable into the VX7 keyboard connector. 3. Once the pins are firml...

the “Vehicle Remote Mount Antenna Installation Sheet” for details. Internal Antenna If the internal antenna option is ordered, an antenna is mounted on the inside of the user access panel cover. The internal antenna assembly has two antenna cables. Attach the antenna cables to the radio card. When t...

closed container or bag. Refer to the documentation received with the barcode scanner for complete instructions. Connect Serial Printer or PC Refer to the documentation received with the printer or PC for complete instructions. Pin 9 of COM3 (labeled “COM2/3”) is configured to provide RI. To change ...

Ethernet and USB Ports An Ethernet port and different types of external USB ports are available via a dongle cable attached to the port labeled “ETHERNET/USB”, located on the bottom of the VX7. Please refer to th illustrations below for the different USB connectors available via dongle cable. 1. Pow...

Connect External Headset The VX7 provides an external headset connection via an audio jack connector labeled “Audio”. The audio jack accepts a headset with a 2.5mm plug, such as a mono headset with microphone or a stereo headset. Please refer to the VX7 Reference Guide for information on configuring...

External Power Supply, Optional The LXE-approved AC Power Adapter is only intended for use in a 25ºC (77ºF) maximum ambient temperature environment. In North America, this unit is intended for use with a UL Listed ITE power supply with output rated 12 – 80 VDC, minimum 75W. Outside North America, th...

Vehicle 12-80VDC Power Connection Caution: For proper and safe installation, the input power cable must be connected to a fused circuit on the vehicle. This fused circuit requires a 10 Amp maximum time delay (slow blow) high interrupting rating fuse. If the supply connection is made directly to the ...

3. Route the power cable the shortest way possible. The cable is rated for a maximum temperature of 105°C (221°F). When routing this cable it should be protected from physical damage and from surfaces that might exceed this temperature. Do not expose the cable to chemicals or oil that may cause the ...

How To: Connect VX7 to a Remotely Mounted UPS Battery Pack 1. Connect the power cable to the vehicle’s electrical system as described in “Connect Vehicle 12-80VDC Connection”. 2. Connect the power cable to the UPS battery pack by aligning the water-tight connector pins to the input connector (labele...

Power Adapter Cable LXE offers an adapter cable (part no. 9000A077CBLPWRADPTR) to adapt certain VX1, VX2 or VX4 DC power supplies to the VX7. Please read and follow all cautions below to determine if your present power supply can be used with the VX7. Caution: This document assumes the VX1/2/4 DC po...

Fuse Replacement for the VX7 The VX7 uses a 100V, 10A time delay (slow blow), high current interrupting rating fuse that is externally accessible and user replaceable. Should it need replacement, replace with same size, rating and type of fuse – Littlefuse 0234010 or Optifuse MSC-10A (5x20mm). 1. Tu...

Operation Powering On/Off Connect the VX7 to a power source, either AC or Vehicle. The power (on/off) button is located on the front of the VX7. The switch is sealed by a rubber membrane. The Status LED on the LXE VX7 is illuminated when the power is on: • Green – VX7 is operating from vehicle or AC...

Keyboard Backlight LXE keyboards feature LEDs that illuminate the individual keys. 95 Key Keyboard The backlight is manually controlled using the “backlight” key in the upper right hand corner of the keyboard. Pressing the backlight key cycles the backlight through the levels of backlight intensity:...

Display and Touchscreen The VX7 Display is a thin-film transistor display capable of supporting SVGA graphics modes. Display size is 800 x 600 pixels. The display covering is designed to resist stains. The touch screen allows signature capture and touch input. The touch screen is a Resistive Panel w...

Cleaning the Display Keep fingers and rough or sharp objects away from the display. If the glass becomes soiled or smudged, clean only with a standard household cleaner such as Windex ® without vinegar or use Isopropyl Alcohol. Do not use paper towels or harsh-chemical-based cleaning fluids since th...

Touchscreen and Mouse Please refer to the “VX7 Reference Guide” for information on identifying your VX7. Platform 1 VX7’s Because the touchscreen also functions as a mouse, the pointer for on the 95-key keyboard, a USB mouse or a PS/2 mouse may not always be visible on the screen. The mouse pointer ...

Adjust Speaker Volume Microsoft Windows CE .NET provides volume adjustment by clicking the “Volume and Sounds” icon in the Windows CE .NET Control Panel. The volume control adjusts the built in speaker’s volume. Note: The <F8> and <F9> keys on the 60-key LXE keyboard have no function as ...

Laser Barcode Scanner Warnings • Do not look into the laser’s lens. • Do not stare directly into the laser beam. • Do not remove the laser caution labels from the scanner. • Do not connect the laser barcode module to any other device. Caution: Please read the caution labels. Avoid exposure. Laser li...

Keyboard Entry Refer to Appendix A “Key Maps” for specific keypresses. The keyboard is used to manually input data that is not collected otherwise. Almost any function that a full sized computer keyboard can provide is duplicated on the LXE keyboard but it may take a few more keystrokes to accomplis...

• The cursor begins to flash in the field. • The unit is ready to accept data from either the keyboard or a device connected to a serial port. Right Click A right click can be simulated on the touch screen. To perform a right click, touch the touch screen with the stylus and hold it in the same loca...

Successful Scan When the scan is successful, the scanner’s good scan indicator illuminates, the scan on indicator is off, and the currently running application may produce a distinctive audible tone. Unsuccessful Scan When the scan is unsuccessful, the scan on indicator remains illuminated and the c...

Appendix A Key Maps 95-key Keypad with Pointing Device The key map table that follows lists the commands used for the VX7. Note that since the VX7 uses a Microsoft Windows CE .NET operating system, no DOS Terminal Emulation keypress sequences are provided. Key Map 101-Key Equivalencies There are ten...

Important: This symbol is placed on the product to remind users to dispose of Waste Electrical and Electronic Equipment (WEEE) appropriately, per Directive 2002-96-EC. In most areas, this product can be recycled, reclaimed and re-used when properly discarded. Do not discard labeled units with trash....