LXE E-EQ-MX7OGWW-C - Manuals

Page 2 - Notices; ® is a registered trademark of LXE Inc.; Important

Language: English Notices LXE Inc. reserves the right to make improvements or changes in the products described in this guide at any time without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, LXE assumes no liability resulting from any er...

Page 3 - Revision Notice; Explanation; Equipment Needed

Revision Notice Rev. Section Explanation B Notices and Appendix B – Regulatory Notices and Safety Information (May 2006) Added label and text : “Republic of Singapore – LXE Dealer License Number DA103458 complies with IDA Standards.” C Introduction (August 2006) Added Laser Label for Summit Client ....

Page 5 - Table of Contents; NTRODUCTION

E-EQ-MX7OGWW-C MX7 User’s Guide Table of Contents I NTRODUCTION 1 Overview.................................................................................................................................... 1 MX7 Features .................................................................................

Page 6 - HE

ii Table of Contents MX7 User’s Guide E-EQ-MX7OGWW-C Keypad Entry ......................................................................................................................................... 25 Stylus Data Entry ..............................................................................

Page 8 - Illustrations

iv Table of Contents MX7 User’s Guide E-EQ-MX7OGWW-C Illustrations Figure 1 CDRH / IEC 825 Caution Label Location – MX7, Back ................................................................... 5 Figure 2 Caution Label – Class 2 Laser Scanner ............................................................

Page 9 - Introduction; Overview; “Chapter 4 – AppLock” for setup and processing.; Related Manuals; Note: The SE955 scanner replaced the SE824; Intermec EV15 linear imager,

E-EQ-MX7OGWW-C MX7 User’s Guide Introduction Overview The LXE® MX7 is a rugged, portable, hand-held Microsoft® Windows® CE 5.0 equipped mobile computer capable of wireless data communications. The mobile device can transmit information using an 802.11 radio and it can store information for later tra...

Page 10 - MX7 Features; Odyssey Client Utility; Odyssey; The LXE Login Utility should be used by Odyssey Clients

2 Overview MX7 User’s Guide E-EQ-MX7OGWW-C MX7 Features New features affect user interaction and internal operation of the MX7. The appropriate radio utility for your device configuration has been pre-installed by LXE. The desktop will display an Odyssey Client Utility icon or it will display a Summ...

Page 11 - Important Battery Information; Tap; CAUTION

Overview 3 E-EQ-MX7OGWW-C MX7 User’s Guide Important Battery Information Note: This mobile device’s backup battery maintains it’s charge by drawing power from the main battery pack. Always store unused devices with a fully charged main battery pack installed. LXE recommends an in-use mobile device b...

Page 12 - Document Conventions; ATTENTION; Environmental Specifications

4 Overview MX7 User’s Guide E-EQ-MX7OGWW-C Document Conventions ALL CAPS All caps are used to represent disk directories, file names, and application names. Menu | Choice Rather than use the phrase “choose the Save command from the File menu”, this guide uses the convention “choose File | Save”. “Qu...

Page 13 - Laser Warnings and Labels; Do not look into the laser’s lens.; Summit Client Laser Label

Laser Warnings and Labels 5 E-EQ-MX7OGWW-C MX7 User’s Guide Laser Warnings and Labels • Do not look into the laser’s lens. • Do not stare directly into the laser beam. • Do not remove the laser caution labels from the MX7. • Do not connect the laser barcode window to any other device. The laser barc...

Page 14 - Front – 55 Key; Figure 3 Front Components

6 Components MX7 User’s Guide E-EQ-MX7OGWW-C Components Front Views BkSp + F11 MX7 Pg Dn Pg Up F6 F13 F14 Caps Esc | ~ : # ; * , > / Ins < . ( ? = ) \ ! $ % ^ & @ } { [ ] | ~ : # ; * , > / Ins < . ( ? = ) \ ! $ % ^ & @ } { [ ] F11 MX7 Pg Dn Pg Up F6 F13 F14 * BkSp Esc Caps + | : ...

Page 15 - Back View; Figure 4 Back Components

Components 7 E-EQ-MX7OGWW-C MX7 User’s Guide Back View Figure 4 Back Components 1 Scanner Aperture 2 Stylus and stylus holder 3 Trigger Handle Attach Points and Handstrap Retainer Bracket Attach Points 4 Main Battery 5 Battery Fastener 6 Cable Ports

Page 16 - Scanner / Imager Aperture; Figure 5 Scanner Aperture; AC Adapter

8 Components MX7 User’s Guide E-EQ-MX7OGWW-C Scanner / Imager Aperture Figure 5 Scanner Aperture Note: The Imager has clear plastic protecting the imager engine. The Scanner has red plastic protecting the scanner engine. The No-Scanner option has an opaque window protecting the MX7 internal componen...

Page 17 - Cables; Cable: Multipurpose USB and Power

Components 9 E-EQ-MX7OGWW-C MX7 User’s Guide Cables Cable: Multipurpose RS-232 and Power MX7A055MULTICBLDA9F Cable: Multipurpose USB and Power MX7A052MULTICBLUSB Adapter/Cable : Audio MX7A060ADPTCBLVOICE Adapter: RS-232 PC port to D9 male MX7A058ADPTCBLPER

Page 18 - Handle and Handstrap; Handle Handstrap; Figure 7 Handle and Handstrap

10 Components MX7 User’s Guide E-EQ-MX7OGWW-C Handle and Handstrap Handle Handstrap Figure 7 Handle and Handstrap 1 Scan Aperture 1 Handstrap Retainer Bracket 2 Trigger 2 Handstrap 3 Handle 3 Handstrap Clip 4 Tether Attach Point Note: Either the trigger handle is attached to the MX7 or the handstrap...

Page 19 - Quick Start; MX7 with Odyssey Client

E-EQ-MX7OGWW-C MX7 User’s Guide Quick Start In Brief . . . Note: When your mobile device is pre-configured, the radio, keypad and scan aperture configurations are assembled by LXE to your specifications. The desktop will display an Odyssey Client Utility icon or it will display a Summit Client Utili...

Page 20 - MX7 User’s Guide; Troubleshooting; Tap File | Exit to close the RFTerm application.

12 In Brief . . . MX7 User’s Guide E-EQ-MX7OGWW-C Troubleshooting Can’t calibrate the touch screen, change the date/time or adjust the volume. AppLock is installed and running on the mobile device. AppLock restricts User access to running programs. Changes or modifications require Administrator acce...

Page 21 - Figure 9 Handle Attach Points

Installing Trigger Handle (Optional) 13 E-EQ-MX7OGWW-C MX7 User’s Guide Installing Trigger Handle (Optional) Note: Either the trigger handle is attached to the MX7 or the handstrap is attached, not both. LXE recommends that, in the absence of a trigger handle, the handstrap be used at all times. The...

Page 22 - Inserting Fully Charged Battery; Figure 10 Main Battery Pack; Place the MX7 in Suspend mode.

14 Inserting Fully Charged Battery MX7 User’s Guide E-EQ-MX7OGWW-C Inserting Fully Charged Battery CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. ATTENTION II y a danger d’explosion s’il y a remplacement incorrect de la...

Page 23 - Tapping the Power Key; or; Suspend; Checking Battery Status; This option should only be used by Odyssey Clients.

Tapping the Power Key 15 E-EQ-MX7OGWW-C MX7 User’s Guide Tapping the Power Key Note: Refer to the section titled "Power Modes" in the “MX7 Reference Guide” for information relating to the power states of the MX7. Important: Until the main battery and backup battery are completely depleted, t...

Page 24 - Tapping the Touchscreen with a Stylus; Open applications; Keypad Shortcuts; Use keyboard shortcuts instead of the stylus:

16 Tapping the Touchscreen with a Stylus MX7 User’s Guide E-EQ-MX7OGWW-C Tapping the Touchscreen with a Stylus Note: Always use the point of the stylus for tapping or making strokes on the touchscreen. Never use an actual pen, pencil, or sharp/abrasive object to write on the touchscreen. Hold the st...

Page 25 - Calibrating the Touchscreen; Figure 12 Touchscreen Recalibration; Entering the Multi AppLock Activation Key; switching applications; Touch

Calibrating the Touchscreen 17 E-EQ-MX7OGWW-C MX7 User’s Guide Calibrating the Touchscreen If the touchscreen is not responding properly to stylus taps, you may need to recalibrate the touchscreen. Recalibration involves tapping the center of a target. If you miss the center, keep the stylus on the ...

Page 26 - Figure 13 Attaching the Handstrap

18 Optional Accessory Installation MX7 User’s Guide E-EQ-MX7OGWW-C Optional Accessory Installation Attaching Handstrap Note: Either the trigger handle is attached to the MX7 or the handstrap is attached, not both. LXE recommends that, in the absence of a trigger handle, the handstrap be used at all ...

Page 27 - Connecting an External Power Supply (Optional); Putting it all together ....; Figure 14 USB – MX7 – Power Assembly; Assembling the AC Power Adapter; Figure 15 AC/DC 12V External Power Supply

Optional Accessory Installation 19 E-EQ-MX7OGWW-C MX7 User’s Guide Connecting an External Power Supply (Optional) The MX7 receives AC/DC power from the AC/DC 12V Power Supply. The MX7 external power connection is part of the RS-232 cable assembly and the USB cable assembly. Putting it all together …...

Page 28 - Connecting the Multipurpose USB / Power Cable; Figure 16 Connect the USB / Power Cable to the MX7 Port; Connecting the Multipurpose RS-232 / Power Cable; Figure 17 Connect the RS-232 / Power Cable to the MX7 Port

20 Optional Accessory Installation MX7 User’s Guide E-EQ-MX7OGWW-C Connecting the Multipurpose USB / Power Cable C B A Figure 16 Connect the USB / Power Cable to the MX7 Port Connector A Squeeze the clips on the connector cable to open the catches in the connector assembly. Firmly press Connector A ...

Page 29 - Connecting to a Printer Interface Cable; Figure 18 Connect to a Printer Interface Cable; Connecting the Audio Cable and a Headset; The audio option draws power from the main battery.; Figure 19 Audio Cable and Headset

Optional Accessory Installation 21 E-EQ-MX7OGWW-C MX7 User’s Guide Connecting to a Printer Interface Cable B A Figure 18 Connect to a Printer Interface Cable Connector A Squeeze the clips on the connector cable to open the catches in the connector assembly. Firmly press Connector A into the connecto...

Page 30 - Adjust Microphone and Secure the Cable; Do not twist the microphone boom when adjusting the microphone.; Under Clothing; Leave the cable exposed only at the top of the collar.; Over Clothing; Use clothing clips to hold the cable close to your body.; Entering Data

22 Optional Accessory Installation MX7 User’s Guide E-EQ-MX7OGWW-C Adjust Microphone and Secure the Cable Do not twist the microphone boom when adjusting the microphone. The microphone should be adjusted to be about two finger widths from your mouth. Make sure the microphone is pointed at your mouth...

Page 31 - Using the 55 Key ANSI / CE Keypad

Using the 55 Key ANSI / CE Keypad 23 E-EQ-MX7OGWW-C MX7 User’s Guide Using the 55 Key ANSI / CE Keypad BkSp + F11 MX7 Pg Dn Pg Up F6 F13 F14 Caps Esc | ~ : # ; * , > / Ins < . ( ? = ) \ ! $ % ^ & @ } { [ ] | ~ : # ; * , > / Ins < . ( ? = ) \ ! $ % ^ & @ } { [ ] 1 System Status LE...

Page 33 - The cursor begins to flash in the field.

Entering Data 25 E-EQ-MX7OGWW-C MX7 User’s Guide Entering Data You can enter data into the MX7 through several different methods. The Scanner aperture provides barcode data entry, the Input/Output (I/O) port is used to input/output data, and the keypad provides manual entry. Mobile devices with a to...

Page 34 - Scanner Entry; Read all cautions, warnings and labels; before; using the laser; Figure 20 Scan Beam; Tethered Scanners; Tethered scanners are not supported on the MX7.; Voice Data

26 Entering Data MX7 User’s Guide E-EQ-MX7OGWW-C Scanner Entry Read all cautions, warnings and labels before using the laser scanner. Do not look into the laser’s lens. Do not stare directly into the laser beam. To scan with the integrated laser barcode reader, point the laser aperture towards a bar...

Page 35 - Input Panel – Virtual Keyboard; Tap the Shift key to type one capital letter.; Figure 22 Input Panel / Virtual Keyboard; Tap the Input Panel/Virtual Keyboard icon in the taskbar.

Entering Data 27 E-EQ-MX7OGWW-C MX7 User’s Guide Input Panel – Virtual Keyboard The virtual keyboard is always available when needed e.g. text field input. Tap the keyboard icon at the bottom of the screen to put the virtual keyboard on the display. Using the stylus: • Tap the Shift key to type one ...

Page 39 - The MX7 Hand Held Computer; Reboot Sequence; whenever necessary.; Run; Saving Changes to the Registry; Tap the; Warmboot; Install Restart in the Start menu by; Coldboot

E-EQ-MX7OGWW-C MX7 User’s Guide The MX7 Hand Held Computer Reboot Sequence When the Windows CE desktop is displayed or an application begins, the power up (or reboot) sequence is complete. If you have previously saved your settings, they will be restored on reboot. Application changes are saved when...

Page 40 - Touchscreen Display; Figure 23 Touchscreen Display; Applying the Protective Film to the Display

32 Touchscreen Display MX7 User’s Guide E-EQ-MX7OGWW-C Touchscreen Display Figure 23 Touchscreen Display The touchscreen display is an active color LCD unit capable of supporting VGA graphics modes. Display size is 240 x 320 pixels or ¼ VGA in portrait orientation. The touchscreen allows signature c...

Page 41 - Touchscreen Calibration; To recalibrate the screen, select; Figure 24 Touchscreen Recalibration; See the “MX7 Reference Guide” for complete instructions.; Cleaning the Glass Display/Scanner Aperture

Touchscreen Display 33 E-EQ-MX7OGWW-C MX7 User’s Guide Touchscreen Calibration If the touchscreen is not responding properly to stylus taps, the touchscreen may need to be recalibrated. Press <Ctrl>+<Esc> to force the Start Menu to appear, if needed. Contact your System Administrator for...

Page 42 - Blue; Press the Enter key to exit this mode.; Set the Display Backlight Timer; Figure 25 Setting the Display Backlight Timer; dims the backlight

34 Adjusting the Display Backlight MX7 User’s Guide E-EQ-MX7OGWW-C Adjusting the Display Backlight Set the Display Backlight Brightness When the backlight is on, press the Blue key and the Scan key. • Use the Up Arrow and Down Arrow keys to adjust backlight brightness until the display lightens or d...

Page 43 - The backlight turns off after 3 seconds of no activity,

Setting the Power Schemes Timers 35 E-EQ-MX7OGWW-C MX7 User’s Guide Setting the Power Schemes Timers Note: Refer to the section titled “Power Modes” in the MX7 Reference Guide for information relating to the power states of the mobile device. Select | Settings | Control Panel | Power | Schemes tab. ...

Page 44 - Setting The Audio Speaker Volume; To adjust speaker volume:; Orange

36 Setting The Audio Speaker Volume MX7 User’s Guide E-EQ-MX7OGWW-C Setting The Audio Speaker Volume Note: An application may override the control of the speaker volume. Turning off sounds saves power and prolongs battery life. The speaker is located on the front of the device above the MX7 logo. Th...

Page 45 - Using the Touchscreen; Figure 26 Volume & Sounds Properties

Setting The Audio Speaker Volume 37 E-EQ-MX7OGWW-C MX7 User’s Guide Using the Touchscreen Figure 26 Volume & Sounds Properties Tap | Settings | Control Panel | Volume & Sounds | Volume tab. Change the volume setting and tap OK to save the change. You can also select / deselect sounds for key...

Page 46 - The Keypads; Figure 27 The 32-key and 55-key Keypads

38 The Keypads MX7 User’s Guide E-EQ-MX7OGWW-C The Keypads The keypad is installed and configured by LXE to your specifications. 32-key Keypad 55-key ANSI/CE Keypad 55-key IBM 5250 Keypad Figure 27 The 32-key and 55-key Keypads See “Appendix A – Key Maps” for instruction on the specific keypresses t...

Page 47 - LED Indicators; System Status; Comment; Blinking Red; Scan Status; Steady Green

The Keypads 39 E-EQ-MX7OGWW-C MX7 User’s Guide LED Indicators System Status The System Status LED is located at the top left of the keypad, above the Scan button. When the LED is . . . The Status is . . . Comment Blinking Red Power Fail Replace the main battery with a fully charged main battery. Or ...

Page 48 - Sticky Keys

40 The Keypads MX7 User’s Guide E-EQ-MX7OGWW-C Standard Keys Scan The integrated scanner scans only when the Scan button is pressed (or when the scan trigger is pressed on the optional trigger handle). Enter The Enter key is used to confirm a forms entry or to transmit information. How it is used is...

Page 49 - Field Exit; IBM 5250 specific keypad only

The Keypads 41 E-EQ-MX7OGWW-C MX7 User’s Guide Orange and Blue Keys / The Orange and Blue keys are sticky keys that, when tapped, activate the second functions of the keypad. Printed above many keys are small characters, in either orange (on the left side of the key) or blue (on the right side of th...

Page 50 - Mode Key Functions; CapsLock Mode; No CapsLock AND No Shift keypress – result is a lowercase letter.; B or Not 2 B; To put the number 2 in a text entry field:

42 The Keypads MX7 User’s Guide E-EQ-MX7OGWW-C Mode Key Functions CapsLock Mode This function is similar to a regular keyboard’s CapsLock key. Note that the CapsLock mode stays active until the CapsLock key sequence is pressed again. Each time you need to use a Caps function, you need to press the C...

Page 51 - Mappable Diamond Keys; 2 Key Diamond 2 / Diamond 3; Figure 28 Mappable Diamond Keys; 5 Key Keypad

The Keypads 43 E-EQ-MX7OGWW-C MX7 User’s Guide Mappable Diamond Keys The Diamond keys can be programmed to perform specific functions. For example, using this Settings option, you could set the Diamond 1 key to function as an ESC key. Setting the Diamond 1 key to function as an ESC key does not disa...

Page 52 - 2 Key Keypad

44 The Keypads MX7 User’s Guide E-EQ-MX7OGWW-C 32 Key Keypad The user can program the following key combinations using the Diamond keys: user defined without using a sticky key + asterisk (*) + user defined without using a sticky key + equal sign (=) open parenthesis ( user defined without using a s...

Page 53 - Batteries; New batteries must be charged prior to use; Battery Pack Model Number –; Main Battery; Backup Battery

Batteries 45 E-EQ-MX7OGWW-C MX7 User’s Guide Batteries Note: New batteries must be charged prior to use . If the main battery and backup battery are depleted, the mobile device reverts to factory default values. Wireless configuration parameters will need to be re-entered after reverting to factory ...

Page 54 - Battery Hotswapping; Warning: Never replace the main battery in a hazardous location.

46 Batteries MX7 User’s Guide E-EQ-MX7OGWW-C Backup battery replacement is performed by LXE. Note: An uninterrupted external power source (wall AC adapters) transfers power to the computer’s internal charging circuitry which, in turn, recharges the main battery and backup battery. Frequent connectio...

Page 56 - Figure 31 Insert Battery Pack in Charging Pocket; Well

48 Battery Chargers MX7 User’s Guide E-EQ-MX7OGWW-C Figure 31 Insert Battery Pack in Charging Pocket 1. Battery Well 2. Retaining Clip 3. Battery Charging Contacts Lower the battery pack straight into the battery charger pocket and push it down firmly. Do not "slam" the battery into the char...

Page 57 - Passive Vehicle Mount Cradle; Does not obstruct the driver's vision or safe vehicle operation.

Passive Vehicle Mount Cradle 49 E-EQ-MX7OGWW-C MX7 User’s Guide Passive Vehicle Mount Cradle A passive vehicle mount cradle is available for the MX7. The cradle restrains the MX7. The passive cradle does not have an external device connector e.g. power/RS-232 cable. Wireless client interaction is av...

Page 58 - Cradle Assembly Components; Figure 32 Passive Vehicle Mount Cradle and U-Bracket

50 Passive Vehicle Mount Cradle MX7 User’s Guide E-EQ-MX7OGWW-C Cradle Assembly Components Note: Bolts, washers, and wrench needed when attaching the mobile device to the vehicle are not supplied by LXE. U-Bracket Figure 32 Passive Vehicle Mount Cradle and U-Bracket U-Bracket Footprint Not To Scale ...

Page 59 - RAM Ball and Cylinder; Figure 34 Passive Vehicle Mount Cradle / RAM Ball Assembly

Passive Vehicle Mount Cradle 51 E-EQ-MX7OGWW-C MX7 User’s Guide RAM Ball and Cylinder Figure 34 Passive Vehicle Mount Cradle / RAM Ball Assembly Figure 35 RAM Bracket Components Mount the cradle U-bracket to the upper RAM ball assembly with the bolts, washers and nuts supplied by LXE. Qty 4 - Hex Ca...

Page 60 - RAM Assembly Footprint

52 Passive Vehicle Mount Cradle MX7 User’s Guide E-EQ-MX7OGWW-C RAM Assembly Footprint Not To Scale Figure 36 RAM Assembly Footprint Note: LXE does not supply the bolts or washers needed when mounting the cradle assembly to the vehicle chassis. LXE recommends using bolts with a maximum 10/32” (0.312...

Page 61 - How to Install the Cradle U-Bracket; Angle Adjust Knob; Figure 37 Installing the Cradle U-Bracket

Passive Vehicle Mount Cradle 53 E-EQ-MX7OGWW-C MX7 User’s Guide How to Install the Cradle U-Bracket 1. MX7 2. Angle Adjust Knob 3. Passive Cradle 4. U-Bracket 5. Mounting Bolt Figure 37 Installing the Cradle U-Bracket 1. Attach the U-Bracket to the vehicle, making sure it does not impede safe operat...

Page 63 - How To Install the RAM Bracket; Figure 38 Installing the RAM Assembly

Passive Vehicle Mount Cradle 55 E-EQ-MX7OGWW-C MX7 User’s Guide How To Install the RAM Bracket 1. MX7 2. Angle Adjust Knobs 3. Passive Cradle 4. U-Bracket 5. Mounting Hex Bolt 6. Upper RAM Ball Assembly 7. Arm 8. Thumbscrew 9. Lower RAM Ball Assembly Figure 38 Installing the RAM Assembly 1. Attach t...

Page 67 - Appendix A Key Maps; “Sticky” keys are also known as “second” function keys.; 5-Key Alphanumeric Keymaps; Press any other key but Up Arrow or Down Arrow to exit Adjust Mode.

E-EQ-MX7OGWW-C MX7 User’s Guide Appendix A Key Maps Introduction Remember : “Sticky” keys are also known as “second” function keys. Ctl/Ctrl, Alt, Shft, Blue and Orange keys are “sticky keys”. Sticky keys do not need to be held down before pressing the next (or desired) key. It is valid to use combi...

Page 73 - Press These Keys and Then ...; Toggle Alpha Mode; key but Up Arrow or Down Arrow to exit Adjust Mode.

32-Key Numeric-Alpha Keypad 65 E-EQ-MX7OGWW-C MX7 User’s Guide 32-Key Numeric-Alpha Keypad When using a sequence of keys that require an alpha key, first press the Alph key. Use the Shft sticky key or the Caps key sequence (Blue+Tab) for upper case alphabetic characters. Pressing the Alph key forces...

Page 79 - Appendix B Regulatory Notices and Safety Information; Note; EMC Directive Requirements

E-EQ-MX7OGWW-C MX7 User’s Guide Appendix B Regulatory Notices and Safety Information FCC Information: This device complies with FCC Rules, part 15. Operation is subject to the following conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference that...

Page 80 - MX7 Approvals/Standards

72 Appendix B Regulatory Notices and Safety Information MX7 User’s Guide E-EQ-MX7OGWW-C Li-Ion Battery When disposing of the MX7 main battery, the following precautions should be observed: The battery should be disposed of promptly. The battery should not be disassembled or crushed. The battery shou...

Page 82 - according to Directives:

74 Appendix B Regulatory Notices and Safety Information MX7 User’s Guide E-EQ-MX7OGWW-C LXE 802.11b/g WLAN Declaration of Conformity (Summit Client) DECLARATION OF CONFORMITY according to Directives: 1999/5/EC 93/68/EEC Radio Equipment and Telecommunications Terminal Equipment and the mutual recogni...

Page 83 - Dedicated Antennas for use with LXE 4830

Appendix B Regulatory Notices and Safety Information 75 E-EQ-MX7OGWW-C MX7 User’s Guide Annex to DoC for LXE 4830 With regard to the use of external antennas The LXE 4830 can be equipped with external antennas. The antennas listed have been evaluated with the LXE 4830 pursuant to EN 300 328, and the...

Page 84 - A/C Power Supply Safety Statement – MX7; ambient temperature environment.; Προαιρετική

76 Appendix B Regulatory Notices and Safety Information MX7 User’s Guide E-EQ-MX7OGWW-C A/C Power Supply Safety Statement – MX7 Output Rated 12 VDC, 1.25 A. The LXE-approved AC Power Adapter is only intended for use in a 25°C (77°F) maximum ambient temperature environment. Optional A/C Power Supply:...

Page 85 - Laser Light Safety Statement

Appendix B Regulatory Notices and Safety Information 77 E-EQ-MX7OGWW-C MX7 User’s Guide Laser Light Safety Statement Warning: This product uses laser light. One of the following labels is provided on the scanner. Please read the Caution statement. (US) Mise én garde: Ce produit utilise un rayon lase...

Page 86 - Aþaðýdaki etiketlerden bir tanesi

78 Appendix B Regulatory Notices and Safety Information MX7 User’s Guide E-EQ-MX7OGWW-C Laser Light Safety Statement Aþaðýdaki etiketlerden bir tanesi tarayýcýnýn üstünde saðlanýr. Lütfen Dikkat ifadesini okuyun. (TR) (GR) (KR) (JP) (CN) Legend: Chinese-CN; Danish-DK; Dutch-NL; English-US; Finnish-F...

Page 89 - Index

Index 81 E-EQ-MX7OGWW-C MX7 User’s Guide Index 2nd key function, described ..................................41 32-key Keymap.....................................................65 55-key Keymaps ...................................................59 A AC External Power Supply, How to ..................