LXE E-EQ-MX6OGWW-E-ARC - Manuals

Page 2 - Notices; LXE® is a registered trademark of LXE Inc.; Important

LANGUAGE : ENGLISH Notices LXE Inc. reserves the right to make improvements or changes in the products described in this document at any time without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, LXE assumes no liability resulting from an...

Page 3 - Revision Notice; the gas gauge

Revision Notice Notices Changed HHP® to Hand Held Products® where applicable. Added register mark for RAM® mounting products. Entire Manual Updated path statements and instructions based on Version 7.03 vs Version 7.11 vs Version 7.13 operating systems. Updated graphics to display LXE 2005 logo. Int...

Page 5 - MX6 User’s Guide; Table of Contents; NTRODUCTION

E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Table of Contents I NTRODUCTION 1 Overview .................................................................................................................... 1 Identify Your MX6 Device ................................................................................

Page 6 - SING THE

ii Table of Contents MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Connect the Headset (Optional) ............................................................................ 21 Adjust the Headset Controls ...................................................................................................21 Se...

Page 8 - Illustrations

iv Table of Contents MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Illustrations Figure 1 Start Screen - Pocket PC 2002............................................................................................................... 2 Figure 2 Start Screen - Windows Mobile..........................................

Page 9 - Introduction; Overview; If the mobile device has AppLock installed, please refer to the

E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Introduction Overview The MX6 is a lightweight hand-held computer that uses Microsoft® Windows Mobile® software and a powerful, battery-saving Xscale™ processor. The MX6 can transmit information using a 2.4 GHz radio (with an internally mounted antenna) and it can...

Page 10 - Identify Your MX6 Device; Figure 1 Start Screen -; Important Battery Information

2 Identify Your MX6 Device MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Identify Your MX6 Device LXE offers the MX6 with a Pocket PC 2002 operating system and the MX6 with a Windows Mobile operating system. This user guide, the MX6 User’s Guide, is specifically for the user with an MX6 running Windows Mobile...

Page 11 - Document Conventions; ATTENTION; DANGER; MX6 Environmental Specifications; Operating Temperature

Document Conventions 3 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Li-Ion Battery When disposing of the MX6 main battery, the following precautions should be observed: The battery should be disposed of properly. The battery should not be disassembled or crushed. The battery should not be heated above 212°F ...

Page 12 - Laser Scanner Warnings and Labels; Do not look into the laser’s lens.; Figure 3 CDRH / IEC 825 Caution Label

4 Laser Scanner Warnings and Labels MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Laser Scanner Warnings and Labels • Do not look into the laser’s lens. • Do not stare directly into the laser beam. • Do not remove the laser caution labels from the MX6. • Do not connect the laser barcode window to any other de...

Page 13 - Quick Start; In General; First; four hours; either while in the MX6 in a powered docking cradle, or; Start; Troubleshooting

E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Quick Start This section’s instructions are based on the assumption that your new MX6 is pre-configured and the trigger handle or optional handstrap is installed. Note: Review the software/hardware versions of the MX6 by selecting Start | Utils (or Power Tools) | ...

Page 14 - Components; Figure 5 Front of MX6

6 Components MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Components 1. Scan LED 2. Decode LED 3. Touchscreen Display 4. Power key 5. Scan key 6. Cursor keys 7. Backlight Toggle key on the 56-key keypad Figure 5 Front of MX6

Page 15 - Handstrap Connector; Figure 6 Back of MX6; Scanner Aperture; Figure 7 Scanner / Imager Aperture

Components 7 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide 1. Imager / Scanner Aperture 2. Speaker 3. Handstrap Connector 4. Stylus (No Trigger Handle) 5. Microphone 6. Battery Well 7. Battery Figure 6 Back of MX6 Scanner Aperture Imager Aperture Figure 7 Scanner / Imager Aperture

Page 17 - Insert Fully Charged Battery; Tap the Power key to place the MX6 in Suspend mode.; Low Battery Condition; Main Low

Insert Fully Charged Battery 9 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Insert Fully Charged Battery Note: The unit will not function unless the battery compartment cover (main battery pack) is in place and securely latched. Be sure to place the unit in suspend before removing the battery. If you don’t, ...

Page 18 - About Lithium-Ion Batteries; tab to; Power Key; Figure 10 Today Screen

10 Power Key MX6 User’s Guide E-EQ-MX6OGWW-E-ARC About Lithium-Ion Batteries Li-Ion batteries (like all batteries) gradually lose their capacity over time (in a linear fashion) and never just stop working. This is important to remember -- the MX6 is always 'on' even when in the Suspend state and dra...

Page 19 - Reset or Reboot; CAUTION; Soft Reset; After a Soft Reset; Hard Reset; Quick

Power Key 11 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Reset or Reboot CAUTION LXE recommends that you always attempt a Soft reset before initiating a Hard reset. Once you initiate a hard reset, all applications are forcibly closed and working RAM and files are cleared. It is a good idea to store importan...

Page 20 - Using the Stylus; Figure 11 Stylus Storage Locations and Using the Stylus; Accessories

12 Using the Stylus MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Using the Stylus Note: Always use the point of the stylus for tapping or making strokes on the display. Never use an actual pen, pencil, abrasive or sharp object to write on the touch screen. Use only the supplied stylus or plastic-tipped pens ...

Page 21 - General Windows Keyboard Shortcuts; Press these keys ...

General Windows Keyboard Shortcuts 13 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide General Windows Keyboard Shortcuts Use the keyboard shortcuts in the chart below to navigate the 35- and 56-key keypads. These are standard keyboard shortcuts for Windows applications. Press these keys … To … CTRL + C Copy CTR...

Page 22 - Entering the Dual AppLock Activation Key; Figure 12 Application Switching Touch Panel; Touch; . The key sequence switches the focus

14 Entering the Dual AppLock Activation Key MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Entering the Dual AppLock Activation Key The appearance of the taskbar icons are different on various mobile device platforms and may differ from the example shown below. This example is shown only to aid in describing h...

Page 23 - Align the Touchscreen; Figure 13 Align the Touchscreen; Tap the; Align Screen; Cleaning the Touch Screen and Scanner/Imager Aperture

Align the Touchscreen 15 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Align the Touchscreen Access: Start | Settings | System tab | Screen | Align Screen Figure 13 Align the Touchscreen Tap the Align Screen button to begin. Tap the target ( + ) with the stylus and follow the instructions on the screen. Caref...

Page 24 - Set the Date and Time; Figure 14 Set the Date and Time; month

16 Set the Date and Time MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Set the Date and Time Access: Start | Settings | Systems tab | Clock and Alarms Figure 14 Set the Date and Time 1. Select your correct time zone from the pull-down list. 2. To change the time, select the hour, minute, seconds, or AM/PM and...

Page 25 - Setting Display Backlight Action; The parameter settings in; Figure 15 Set Backlight; Turn on backlight

Page 26 - Dim Backlight if device is not used for; Dim Backlight if device is not used for:; Turn off backlight if device is not used for; Turn off backlight if device is not used for:; Turn on backlight when a button is pressed or the screen is tapped; Power Modes; Backlight Intensity

18 Setting Display Backlight Action MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Dim Backlight if device is not used for When Dim Backlight if device is not used for: is checked and a time delay is set, the backlight on the display dims to the minimum value in Backlight Intensity when the timer expires. • Ta...

Page 27 - Set the Power Off Timer; Tap; Figure 16 Set Power Off Timers; On battery power; On external power; Turn off device if not used for

Set the Power Off Timer 19 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Set the Power Off Timer Note: Refer to the section titled "Power Modes" in the MX6 Reference Guide for information relating to the power states of the MX6. Tap the Start | Settings | System | Power icon. Tap the Advanced tab. Fig...

Page 28 - Accessing Files in Flash Memory; RegBackup; Saving Your Changes; MX6 Reference Guide

20 Accessing Files in Flash Memory MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Accessing Files in Flash Memory My Documents Folder Start | Programs | File Explorer | My Device | My Documents Programs and files located in this folder are saved through a hard and soft reset if they had been saved prior to res...

Page 29 - The audio option draws power from the main battery Pack.; Adjust the Headset Controls; Figure 18 Headset Control

Connect the Headset (Optional) 21 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Connect the Headset (Optional) The MX6 audio jack is located on the side of the unit next to the scan aperture and the SDA door (Secure Digital Access). The internal speaker is disabled when the audio jack is connected. Figure 17 ...

Page 30 - Set the Audio Speaker Volume; Figure 19 Set the Audio Speaker Volume; To adjust the volume, tap the; Volume; Change settings and tap OK to save the changes.

22 Set the Audio Speaker Volume MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Set the Audio Speaker Volume Note: An application may override the control of the speaker volume. Turning off sounds saves power and prolongs battery life. Version 7.03 Version 7.11 and 7.13 Figure 19 Set the Audio Speaker Volume Th...

Page 31 - Connect External Power Supply (Optional); Main Batteries are Charging; Figure 20 AC/DC 12V External Power Supply Kit

Connect External Power Supply (Optional) 23 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Connect External Power Supply (Optional) The MX6 connector is located at the base of the MX6. The main battery recharges when the MX6 is connected to an external power source and the Main Batteries are Charging icon is d...

Page 32 - Adjust the Handstrap; Figure 21 Handstrap

24 Adjust the Handstrap MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Adjust the Handstrap Figure 21 Handstrap The MX6 has an integrated elastic handstrap that provides a comfortable, secure grip on the unit. It is attached to the MX6 with a clip on the bottom panel. The handstrap should be disconnected from ...

Page 33 - Using the MX6; Enter Data; The Red or Blue keys are pressed when you want to use a 2; you press a Blue or Red key (the 2; key), then press the key that has the desired second-function; Stylus Data Entry; The cursor begins to flash in the field.

E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Using the MX6 Enter Data You can enter data into the MX6 through several different methods. The Scanner aperture provides barcode data entry, the combination USB/RS-232 or the IR port are used to input/output data, and the keypad provides manual entry. MX6's with ...

Page 34 - Using the Integrated Imager or Barcode Scanner; Preparation; Chapter 4 System Configuration; Scanner Setup; Using the Imager / Barcode Scanner; Figure 22 Scan and Decode LEDs; is on the right. When illuminated red, the MX6 is scanning a barcode.; Decode LED; barcode as a “good scan”.

26 Enter Data MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Using the Integrated Imager or Barcode Scanner Use the MX6 imager and the laser scanner to scan, decode, and store information from barcodes. The barcoded data must be “read” into an application or field or the imaged data will be lost. Do not pour, ...

Page 35 - Is the aperture unscratched and unsoiled?; Scan Ranges; Engine; SR; Figure 23 Imager Decode Zones; HP; Figure 24 Laser Decode Zones

Enter Data 27 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Distance from Label Large barcodes can be scanned at the maximum distance. Hold the aperture closer to small barcodes (or with bars that are very close together). Successful Scan When the scan is successful, the Scan LED turns green, then switches of...

Page 36 - Aiming at a Barcode; Imager; Linear Barcode; Correct Scan Angle; D Matrix Barcode; Figure 25 Scan Beam

28 Enter Data MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Aiming at a Barcode Aim the beam aperture away from you, direct it at the barcode and press the trigger or button (as applicable) to scan. The Scan LED (scan indicators are located above the display) turns red to indicate the imager is on. Imager Adj...

Page 37 - Tethered Scanners; To prepare the MX6 to use a tethered scanner, select; Tethered scanner on COM 1

Enter Data 29 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Tethered Scanners Tethered scanners connect to the MX6 communication port or to the communication port on an MX6 vehicle cradle. • An adapter cable is required to attach a tethered scanner directly to the MX6 (MX6A056CBL3IND17D9M) or to the MX6 vehic...

Page 38 - Touch Screen Display; Figure 26 Tapping with the Stylus; System Tray Icons; Figure 27 System Tray Icons

30 Touch Screen Display MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Touch Screen Display Figure 26 Tapping with the Stylus The MX6 Touch Screen display is a color TFT VGA display with a user programmable backlight. Display size is 320 x 240 pixels in portrait orientation. The display covering is designed to...

Page 39 - Soft Input Panel; Tap the Shift key to type one capital letter.

Soft Input Panel 31 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Soft Input Panel The Soft Input Panel (SIP) is always available by tapping the SIP icon in the system tray when the MX6 is powered On. It is always available with one exception – when the Today screen is displayed. To show or hide the input pan...

Page 40 - Entering Text

32 Soft Input Panel MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Entering Text Use the input panel to enter information in any program. You can either type on the soft keyboard or write on the touch screen using Letter Recognizer or Block Recognizer. In either case, the characters appear as written text on t...

Page 41 - Keypads; Figure 29 The 35-key and 56-key Keypads; Keys shown on the 35-key keypad that are inactive:

Keypads 33 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Keypads 35-key Keypad 56-key Keypad 56-key 5250 Keypad Figure 29 The 35-key and 56-key Keypads See also: Appendix A “Key Maps”. Keys shown on the 35-key keypad that are inactive: Contrast Up Contrast Down SEND and END

Page 42 - Special Keys; SCAN Key; The Power key puts the MX6 into and wakes the MX6 from suspend mode.; Tab

34 Keypads MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Special Keys SCAN Key The SCAN key activates the image-taking and/or barcode decoding scan engine. It also “wakes” the MX6 from sleep mode. Power Key The Power key puts the MX6 into and wakes the MX6 from suspend mode. Shift (SFT) The Shift key toggles ...

Page 43 - Arrow Keys; Modifier Keys; Figure 30 Modifier Keys; Function Keys

Keypads 35 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Arrow Keys Press the arrow (or cursor key) to move the cursor or highlighted text entry during a menu/list selection. In Normal mode: • The Up arrow moves the cursor up one row or line. • The Right arrow moves the cursor to the right one character. • Th...

Page 44 - The IR Serial Port; Figure 31 IR Port Location; The

36 The IR Serial Port MX6 User’s Guide E-EQ-MX6OGWW-E-ARC The IR Serial Port Figure 31 IR Port Location The serial port is a half duplex IR (Infrared) port. Through software commands, the port may be set up for IR or a modified RS-232 serial communication. In general, the IR mode is used when commun...

Page 45 - Batteries; Figure 32 Check Battery Status; Main Battery

Batteries 37 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Batteries When the main battery has lost most of its charge, an icon of an “empty” or “half-empty” battery appears. The MX6 also may be programmed to emit a beep at intervals when the battery is low. When you see the empty-battery icon or hear the war...

Page 46 - Backup Battery; The backup battery is replaced by LXE.

38 Batteries MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Backup Battery The MX6 has a backup battery that is designed to provide limited-duration electrical power in the event of main battery pack failure. The backup battery is a 3.6V NiMH battery that is factory installed in the unit. The need for rechargi...

Page 47 - Battery Chargers; Figure 33 Multicharger / Analyzer; Charging a Battery Using the Desktop Docking Cradle; How To Charge a Spare Battery Pack; Snap the battery into place with a hinging motion.

Battery Chargers 39 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Battery Chargers Four Bay Charger/Analyzer (Optional) 1. Status LEDs 2. Battery Capacity Indicator LED 3. Charging Slots 4. Charge/Analyze Slot 5. Analyze Button Figure 33 Multicharger / Analyzer Use the multicharger to charge battery packs out...

Page 48 - Docking Cradles; Powered Desktop Cradle; Label Color

40 Docking Cradles MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Docking Cradles Note: The “MX6 Cradle Reference Guide” contains docking cradle installation and further information. The docking cradles give the MX6 the ability to communicate with a host computer and other equipment. The MX6 can be either On o...

Page 49 - Powered Vehicle Cradle; Each vehicle cradle includes a RAM Universal Mounting Bracket.

Docking Cradles 41 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Powered Vehicle Cradle Label Color Explanation DOCK Solid Green MX6 is properly seated in the charging bay and the main battery in the MX6 is charging. COMM w/serial port Red Serial data is being sent to the MX6 from the host. Green Serial data ...

Page 50 - Getting Help; The following guides are available on the LXE Manuals CD:

42 Getting Help MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Getting Help LXE user guides are now available on CD and they can also be viewed/downloaded from the LXE ServicePass website. Contact your LXE representative to obtain the LXE Manuals CD. You can also get help from LXE by calling the telephone numb...

Page 51 - Vehicle Mount Cradles; Power Cable / Cord not included

Getting Help 43 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Vehicle Mount Cradles MX6 Vehicle Cradle, For use with a Standard MX6 MX6A007VMCRADLE MX6 Vehicle Cradle, For use with Handle MX6A008WHVMCRADLE 12V Vehicle Cradle Power Supply, Cig Lighter Adapter MX6A382PSVEHMT12V 24-48V Vehicle Cradle Power Cable...

Page 52 - Revision History; Revision D – October, 2005

44 Getting Help MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Revision History Revision D – October, 2005 • Notices -- Added WEEE statement. Added WEEE statement to Appendix B. • Quick Start -- Updated appropriate sections to reflect Version 7.11 software. Added “Saving Your Changes”. • Using the MX6 -- Updat...

Page 53 - Appendix A Key Maps; Blue

E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Appendix A Key Maps 35-Key Numeric-Alpha Keypad Use the soft keypad to enter characters that are not available using the 35-key keypad. Press These Keys and Then … To Get This Key / Function Blue Red Ctrl Alpha Sft Caps Lock Press This Key Power / Suspend Power Wi...

Page 54 - for explanation and instruction.

46 35-Key Numeric-Alpha Keypad MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Press These Keys and Then … To Get This Key / Function Blue Red Ctrl Alpha Sft Caps Lock Press This Key Insert N/A Delete Del Home N/A Page Up x Up Arrow Page Down x Down Arrow F1 F1 F2 F2 F3 F3 F4 F4 F5 F5 F6 F6 2 F7 x F1 F8 x F2 F9...

Page 57 - Inactive Keys on the 35-key Keypad; Contrast Up

35-Key Numeric-Alpha Keypad 49 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Press These Keys and Then … To Get This Key / Function Blue Red Ctrl Alpha Sft Caps Lock Press This Key | Use Soft Keypad “ Use Soft Keypad ! x 1 @ x 2 or Blue+F6 # x 3 $ x 4 % x 5 ^ x 6 & x 7 * x 8 ( x 9 ) x 0 Inactive Keys on t...

Page 58 - 6-Key Full Alpha Numeric Keypad

50 56-Key Full Alpha Numeric Keypad MX6 User’s Guide E-EQ-MX6OGWW-E-ARC 56-Key Full Alpha Numeric Keypad Use the soft keypad to enter characters that are not available using the 56-key keypad. Press These Keys and Then … To Get This Key / Function Blue Red Ctrl Alt Shift Caps Lock Press This Key Pow...

Page 61 - Caps Lock must be On.

56-Key Full Alpha Numeric Keypad 53 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Press These Keys and Then … To Get This Key / Function Blue Red Ctrl Alt Shift Caps Lock Press This Key O x O P x P Q x Q R x R S x S T x T U x U V x V W x W X x X Y x Y Z 6 x Y 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 0 0 . (DOT) DO...

Page 63 - Appendix B Regulatory Notices and Safety Information; undesired operation.; Note; Reorient or relocate the receiving antenna.; Warning; authority to operate this equipment.; RF Safety Notice

E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Appendix B Regulatory Notices and Safety Information FCC Information: This device complies with FCC Rules, part 15. Operation is subject to the following conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference ...

Page 64 - LXE Part; France is restricted as follows:

56 Regulatory Notices and Safety Information MX6 User’s Guide E-EQ-MX6OGWW-E-ARC R&TTE Directive Requirements (Applies only to equipment operated within the EU/EFTA) Information to User A label on the exterior of the device should resemble the label shown below. The product is marked with the la...

Page 65 - Approvals; Product; Transceiver Specifications

Regulatory Notices and Safety Information 57 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Approvals Product EMI / EMC Standards Safety Standards RF Standards MX6 FCC Part 15 Subpart B EN 55022 Class B EN55024 EN60950 FCC 15.247 RSS 210 ETS 300 328 Transceiver Transceiver Specifications MX6 with 802.11b EN 30...

Page 66 - LXE MX6 Declaration of Conformity

58 Regulatory Notices and Safety Information MX6 User’s Guide E-EQ-MX6OGWW-E-ARC LXE MX6 Declaration of Conformity DECLARATION OF CONFORMITY according to : The Low Voltage Directive; 73/23/EEC The EMC Directive; 89/336/EEC and the Marking Directive; 93/68/EEC Type of Equipment: Hand Held Computer Br...

Page 67 - LXE 802.11b WLAN Declaration of Conformity

Regulatory Notices and Safety Information 59 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide LXE 802.11b WLAN Declaration of Conformity DECLARATION OF CONFORMITY according to : the R&TTE Directive; 99/5/EEC The EMC Directive; 89/336/EEC The Low Voltage Directive; 73/23/EEC and the Marking Directive; 93/68/E...

Page 68 - Lithium Battery Safety Statement

60 Regulatory Notices and Safety Information MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Lithium Battery Safety Statement Caution: Lithium battery inside. Danger of explosion if battery is incorrectly replaced. Replace only with same or equivalent type recommended by battery manufacturer. (US) Attention: Co...

Page 69 - çinde lityum bataryas

Regulatory Notices and Safety Information 61 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Lithium Battery Safety Statement (GR) (KR) (JP) (CN) Dikkat: İ çinde lityum bataryas ı bulunur. (TR) Legend: Chinese CN Italian IT Danish DK Japanese JP Dutch NL Korean KR English US Norwegian NO Finnish FI Portuguese P...

Page 70 - Laser Light Safety Statement

62 Regulatory Notices and Safety Information MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Laser Light Safety Statement Warning: This product uses laser light. One of the following labels is provided on the scanner. Please read the Caution statement. (US) Mise én garde: Ce produit utilise un rayon laser. L’un...

Page 71 - Aþaðýdaki etiketlerden bir tanesi

Regulatory Notices and Safety Information 63 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Laser Light Safety Statement Aþaðýdaki etiketlerden bir tanesi tarayýcýnýn üstünde saðlanýr. Lütfen Dikkat ifadesini okuyun. (TR) (GR) (KR) (JP) (CN) Legend: Chinese-CN; Danish-DK; Dutch-NL; English-US; Finnish-FI; Fren...

Page 72 - Class 2

64 Regulatory Notices and Safety Information MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Labels – MX6 Hand Held Computer Class 2

Page 73 - Labels – MX6 Hand Held Computer

Regulatory Notices and Safety Information 65 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Labels – MX6 Hand Held Computer Class 3A

Page 75 - Index; Failure

E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Index 2D Matrix barcode, how to scan..............................28 30 minute delay during hotswap................................5 A Accessories ..............................................................42 Activation Key AppLock ................................

Page 76 - Scan buttons

68 Index MX6 User’s Guide E-EQ-MX6OGWW-E-ARC Help .........................................................................42 I Identify your device...................................................2 Images and laser scans.............................................26 Important battery information...

Page 77 - Waste Electrical and Electronic Equipment (WEEE)

Index 69 E-EQ-MX6OGWW-E-ARC MX6 User’s Guide Turn off device if not used for.................................19 U Use the imager .........................................................26 V Virtual keyboard, soft input panel ...........................31 Volume adjust audio volume ....................