Lowrance X-70A 3D - Manuals

12 To adjust the sensitivity, press the SENS key. A menu appears on theright side of the screen as shown on the previous page. Press the rightarrow key to increase it, the left arrow key to decrease it. When you haveit changed to the desired level, press the CLR key to erase the menu orwait a few se...

13 feet (shown by the digital depthdisplay), the unit will show aflat bottom at 45 feet.) To use the zoom feature, firstpress the ZOOM key, thenpress the key next to the zoommenu that appears in the lowerleft corner of the display asshown at right. This switchesthe unit to the 2X zoom mode.This enla...

26 screen is turned on for the firsttime, the digital depth displayis located at the top left cor-ner of the screen. This displaycomes from a separate digitalsonar built into the unit. It dis-plays only the bottom depth. Ifit loses the bottom, the lastknown depth will flash on thedisplay. When the d...

28 To display the char t cursor, press the MENU key. Next, press the keyadjacent to the “2D View Options” label. Finally, press the key next to the“Chart Cursor” menu. Press the CLR key to return to the sonar display. Use the up or down arrow keys to move the cursor up or down to thedesired depth. T...

31 For example, press the key next to the "Depth" label two times to switchfrom feet to meters. This moves the check mark two times from the “Ft” tothe “M”. After setting the units of measure, press the CLR key. MENU - PAGE 3 SURFACE CLARITYT h e m a r k i n g s e x t e n d i n gdownward fro...

33 mark is on the desired range. Press the CLR key to exit the menu. RESET DISTANCE LOGThe X-70A 3D can display the log (distance travelled) in the digital block ifthe optional speed/temperature sensor is installed. This feature startscounting distance as soon as the unit is turned on. To reset the ...

34 3D SIMULATORThe X-70A 3D has a built-in simulator for the 3D display. When this simu-lator is turned on, a realistic 3D view scrolls across the screen. The digitaldepth display shows the simulated bottom depth, and fish symbols ap-pear on the display. IMPORTANT! Do not use the simulator when navi...

35 TROUBLESHOOTING If your unit is not working, or if you need technical help, please use thefollowing troubleshooting section before contacting the factory customerservice depar tment. It may save you the trouble of returning your unit. Unit won’t turn on:1. Check the power cable’s connection at th...

40 Lowrance's UPS Return Service Lowrance Electronics and United Parcel Service (UPS) are proud to offerall of our customers free shipping for all units sent to us for repair or service.If you have to send this unit to the factory, and you are in the continentalUnited States, use the enclosed UPS sh...

41 This UPS shipping offer is good only in the continental United States (excludes Alaska and Hawaii). KEEP THIS LABEL! YOU WILL NEED IT IF YOU EVER NEED TO RETURN YOUR UNIT TO THE FACTORY FOR REPAIR. Accessory Ordering Information To order accessories such as power cables or transducers, please con...

43 How to Obtain Service (Canadian Customers Only) We back your investment in quality products with quick, expert service and genuineLowrance replacement parts. If you need service or repairs, contact the LowranceFactory Customer Service Department at the toll-free number listed below. A technicianm...

44 LITHO IN U.S.A. 988-0133-18 How to Obtain Service - U.S.A. Only We back your investment in quality products with quick, expert service andgenuine Lowrance ® replacement parts. If you're in the United States and you have questions, please contact the Factory Customer Service Depart-ment using our ...