Lowrance LST-3800 - Manuals

3 Recommended Tools and Supplies Supplies are not included, unless otherwise indicated. If the dash doesnot have a standard 2-1/8" (54 mm) hole, you will need a drill or saw tomake the hole. Carefully measure the dash thickness and the hole areabefore cutting or drilling. The buzzer installation...

5 Caution: The bare ends on any unused wires could cause an electrical shortif left exposed. To prevent this, you should cover the individualwire ends — either by capping them with wire nuts or wrappingthem with electrical tape. You should cut off the bare wire beforetaping off the ends. After conne...

6 Timeout There is no exit key in the LST 3800. The menus "time out" instead. Thatmeans they automatically close after a preset amount of time. When youinstall the gauge, the default timeout duration is 5 seconds. You canmodify the T IMEOUT setting by pressing MENU and using the up and down ...