LOREX SHS-4QM - Manuals

LOREX SHS-4QM – Manual in PDF format online.

Manuals:

Manual

Manual LOREX SHS-4QM

Summary

Page 2 - CAUTION

2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO A QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert...

Page 3 - Important Safeguards; Installation

3 Important Safeguards Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important informati...

Page 4 - Service

4 Important Safeguards Service 13. Servicing - Do not attempt to service this video equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 14. Conditions Requiring Service - Unplug this video product ...

Page 5 - FCC CLASS B NOTICE; NOTE

5 General Precautions FCC CLASS B NOTICE Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation....

Page 7 - Table of Contents

7 Table of Contents Table of Contents Important Safeguards ............................................................................ 3-4General Precautions ................................................................................. 5SHS-4QM Features ............................................

Page 8 - Getting Started

8 Getting Started Getting Started The SHS-4QM comes with the following components: CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE. Swticher Power Adapter DIN Video Cable Quad Processor / Switcher 4 x 60’ DIN Extension Cables Remote Cont...

Page 12 - Remote Control

12 Remote Control Remote Control Listed below is a quick reference for the Remote Control. For details on specific features, refer to the Menu Setup on page #. MENU BUTTON - Enters Menu Setup NAVIGATION / ENTER - The NAVIGATION / ENTER BUTTONS are used to move Left / Right / Up / Down. FRZ BUTTON - ...

Page 14 - Camera Installation; Installation Warnings:; Camera Stand Installation:

14 Camera Installation Camera Installation Before you install the camera, carefully plan where and how you will position the camera, and where you will route the cable that connects the camera to the SHS-4QM. Installation Warnings: • Select a location for the camera that provides a clear view of the...

Page 15 - Connecting Cameras

15 Camera Installation Connecting Cameras 1. Connect the female end of the supplied 60’ extension’ cable to the camera. NOTE: Confirm that the arrows on the DIN Camera Cable and the DIN Extension cable are pointed together when connecting the cable. If the pins in the DIN Cable are bent, the Camera ...

Page 16 - Connecting the SHS-4QM Video Cable

16 Connecting the SHS-4QM Video Cable Connecting the SHS-4QM Video Cable Connect the DIN end of the Video Cable to the SHS-4QM. Connect the RCA VIdeo cable to the TV, VCR or Monitor. Connectivity Diagram TV / VCR / MONITOR Connect the Yellow Video Cable to an available video. SHS-4QM Connect the DIN...

Page 17 - Menu Setup; System Setup

17 Menu Setup Menu Setup • Press the MENU button for 3 seconds to enter Menu Mode. • Press the ⇐ ⇑ ⇒ ⇓ buttons to navigate within the Menu and choose the desired selection. • Press the OK Button to accept the selection (labelled as ENTER in menu options) • Press the MENU button to Exit the Menu Setu...

Page 18 - Display Setup

18 Menu Setup Display Setup • DISPLAY ONSCREEN - Press the ⇑ ⇐ ⇒ ⇓ buttons to navigate to the desired selection. Press the enter button to set the Display Options for Title, Date and Time to ON/OFF. • SCREEN POSITION - Changes the position of the screen. Press the ⇑ ⇓ buttons to navigate, and press ...

Page 19 - Camera Setup

19 Menu Setup CAMERA SETUP TITLE: CAMERA01 BRIGHTNESS: 0 CONTRAST: 0SATURATION: 0HUE: 0SHARPNESS: 0MIRRORING: OFF ⇑⇓ SELECT ⇐ ⇒ ADJUST MENU EXIT Camera Setup • SWITCH BETWEEN CAMERAS - Use the ⇐ ⇒ buttons to switch between CAMERA 1~4. • TITLE - Sets the name for the individual Camera. Press the ⇑ ⇓ ...

Page 20 - Motion Setup; Event Setup

20 Menu Setup Motion Setup • SENSITIVITY - Sets the Motion Sensitivity. Press the ⇑ ⇓ buttons to navigate, and press the ⇐ ⇒ buttons to set the values (min~max). • VELOCITY - Sets the Motion Velocity. Press the ⇑ ⇓ buttons to navigate, and press the ⇐ ⇒ buttons to set the values (min~max). • MASKING...

Page 21 - Event Report

21 Menu Setup Event Report • 6 Pages of EVENT REPORTS are available. • Reports can be deleted by selecting the LIST CLEAR option, and setting to YES • Press any button on the SHS-4QM (except the OK button) to stop the Audible Alarm EVENT REPORT 1 / 6 PAGE ⇑⇓ SELECT ⇐ ⇒ SELECT PG MENU EXIT DD-MM-YY H...

Page 23 - It’s all on the web; VISIT

It’s all on the web Product Information User Manuals Quick Start Guides Specification Sheets Software Upgrades Firmware Upgrades Lorex Technology Inc. VISIT wwwlorexcctv.com www.lorexcctv.com