LOREX LW1000 - Manuals - manualsarea.com

Page 2 - Additional Language Manuals are also available at:; Wireless Disclaimer:

2 Thank you for purchasing the LW1000 Series Color Wireless Series Surveillance System. Lorex is committed to providing our customers with a high quality, reliable security product. http://www.lorexcctv.com CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RICK OF ELECTRIC SHOCK DO ...

Page 3 - Important Safeguards; Installation

Important Safeguards 3 Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important informati...

Page 4 - Service; Use

Important Safeguards 4 Service 13. Servicing - Do not attempt to service this video equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 14. Conditions Requiring Service - Unplug this video product ...

Page 5 - General Precautions

General Precautions 5 General Precautions 1. All warnings and instructions of this manual should be followed 2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water dampened cloth for cleaning 3. Do not use this unit in extremely humid or wet places (i.e...

Page 6 - Features; Table of Contents

Features 6 Features ‘EWT’ Eliminates Interference From Most Household Devices Fast & Easy Installation- Plug Into any AC Outlet Receiver Connects to any TV/VCR/DVD Recorder Indoor / Outdoor Night Vision Camera Built-in Microphone for Listening Ability Camera can be Battery Operated ...

Page 7 - Getting Started; Wireless

Getting Started 7 Getting Started The LW1001 and LW1002 come with the following components: CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED ALL COMPONENTS AS LISTED ON THE BOX. * PACKAGE CONTENTS WILL VARY BY SPECIFIC MODEL. PLEASE REFER TO THE PACKAGE FOR CONTENT DETAILS. 1 x WIRELESS RECEIVER...

Page 8 - Wireless Receiver; INPUT; CAMERA CONNECTION DIP SWITCHES; AV OUT

Wireless Receiver 8 Wireless Receiver 1. DC 9V (5V for LW1020/LW1022) INPUT – Connection port for the 9V/5V Power Adaptor (provided with this system). Connect the Power Adaptor to a power source. NOTE: It is recommended that the receiver be connected to a surge bar or similar to protect the equipmen...

Page 9 - Control Buttons; AUTO BUTTON; MANUAL BUTTON; Wireless Receiver Installation; Installing the wireless receiver (for LW1020 and LW1022 ONLY)

Control Buttons 9 LW1001 and LW1002 Control Buttons 1. AUTO BUTTON – When the receiver is set to AUTO Mode, it will continuously switch between connected cameras. The dwell time is set to 4 seconds per camera (by default), however this can be adjusted to 2~30 seconds. • LW1001/ LW1002/ LW1010 /LW101...

Page 10 - Camera Installation; Installation Warnings:

Camera Installation 10 Camera Installation Before you install the camera(s), carefully plan where and how it will be positioned, and where you will route the cable that connects the camera to the power adaptor or battery adaptor. Installation Warnings: • Aim the Cameras to best optimize the viewing ...

Page 11 - Installing the Camera:; NOTE; Wall Mounting Instructions (for the LW1001 and LW1002 ONLY); NOTE: If the base is not flush with the wall:

Camera Installation 11 Installing the Camera: 1. Carefully unpack the Camera. 2. Decide whether the camera will be permanently wall mounted or sit on a tabletop: • If you decide to place the camera on a tabletop or other flat surface, the camera can easily be moved to different locations as desired....

Page 12 - Do not allow the camera to come in contact

12 Wall Mounting Instructions (for the LW1010, LW1012, LW1020, LW1022 ONLY) To mount the camera to a wall: 1. Loosen the screw located on the side of the camera base using a slot head screwdriver. 2. Pull the camera free from the Stand. Mount the stand to the wall: • Mark the position of the two scr...

Page 13 - Connecting Camera Power; BATTERY

13 4. Insert the Camera into the top slot of the stand. 5. Point the camera in the desired position. Tighten the side screw to secure the camera to the Stand. 6. Adjust the angle of the camera for a desired view. Connecting Camera Power The Camera can be powered either by using the provided Power Ad...

Page 15 - Troubleshooting; Problem

Troubleshooting 15 Troubleshooting If you have problems with your System, there is often a quick and simple solution. Please try the following: Problem (for LW1001, LW1002, LW1010, LW1012, LW1020, and LW1022) Solution (for LW1001, LW1002, LW1010, LW1012, LW1020, and LW1022) There is no picture from ...