LOREX DGN209 - Manuals - manualsarea.com

2 Under the copyright laws, this documentation may not be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or part without the prior written consent of Lorex Technologies Inc., except in the manner described in the documentation. © C...

Page 3 - Table of Contents; Timer Recording Setup

3 Table of Contents Important Safety Instructions........................................................................................................................................................ 5 Introduction ......................................................................................

Page 5 - Important Safety Instructions; CAUTION

5 Important Safety Instructions All the safety and operating instructions should be read before operating this equipment. The improper operation may cause irreparable damage to the appliance. Lift and place this equipment gently. Do not expose this equipment to direct sunlight. Do not use this equip...

Page 8 - Front Panel Controls

8 Front Panel Controls 1. REMOVABLE HDD CARTRIDGE Please refer to Appendix #1. 2. LED INDICATORS These LED Lights are ON under the following conditions: • HDD Full: HDD is full • ALARM: If you want to turn off the ALARM LED light, please refer to page 13 and set the Camera / ALARM item as OFF (all o...

Page 9 - UP: When in the setup mode, it works as an Up directional button.; PLAY; Press PLAY to

9 UP: When in the setup mode, it works as an Up directional button. 15. PLAY Press PLAY to playback the most recently recorded video. 16. REW / Left REW: Under DVR play mode, it can play video backward at different speeds. (Press REW again to adjust speed as 1, 2, 4, 8, 16, 32 times) Left: When in t...

Page 10 - Back Panel Connections; INPUT

10 Back Panel Connections 1. POWER INPUT Connects to the Power cord. 2. EXTERNAL I/O Connects to a PC for Remote Control via RS-232 or to an Alarm Block. (see Appendix #3 for more info) 3. 75/HI When using the LOOP function, allows for HI impedance or 75ohms. 4. VIDEO INPUT (1-9) Connects to a video...

Page 11 - Accessing the Main Menu; Main Menu

11 Accessing the Main Menu The Menu allows you to configure your DVR settings and program various recording options. Follow these steps in order to access the Menu: Press the MENU button. The password screen will appear: The default Password is 0000. To change the number of the Password, use the ◄ /...

Page 13 - Timer

13 Timer Recording Setup On the Main Menu, selecting the Timer option will allow you to set daily schedules in which you would like the DVR to automatically record. Pressing ENTER after scrolling to the Timer option will bring up the following menu options: Timer 1. Press ▲ / ▼ to select the day(s) ...

Page 14 - Record Settings; HDD Overwrite Setup; . Note that ‘25A’ indicates 25 ips with audio.; Record Quality Setup

14 Record Settings On the Main menu, selecting the Record option will allow you to set the quality and speed of recordings. Pressing ENTER after scrolling to the Record option will bring up the following menu options: HDD Overwrite Setup 1. Press ENTER to confirm HDD OVERWRITE setup. 2. Press ▲ / ▼ ...

Page 15 - Motion Trigger Record; Camera Channel Setup

15 Motion Trigger Record 1. Press ENTER to confirm MOTION TRIGGER RECORD setup. 2. Press ▲ / ▼ to toggle the option between ON and OFF. 1. Select “ ON ” to set up the motion trigger recording: It can automatically switch from stand-by mode to Recording Mode. The motion detection will change the scan...

Page 17 - Figure 1 MOTION DETECTION SETUP

17 Motion Detection The Motion Detect feature provides a visual indication on the monitor when movement is detected in the picture. Also, if the ‘Motion Trigger Record’ option is enabled in the ‘Record’ menu, recording will activate on all cameras when motion is detected. Use the steps below to enab...

Page 19 - System Setup; Selecting the Audio Input Channel

19 System Setup The System menu is used to configure the system level options on the DXR209. To access the System features, press MENU followed by the 4-digit password. Use the ▲ / ▼ to scroll to the ‘System’ option and press ENTER . Using the ▲ / ▼ buttons, scroll to the desired option and press EN...

Page 22 - Event Log Viewing; Network; Operation

22 (Menu) Search Timer Record Camera System ► Event Network (Menu) Search Timer Record Camera System Event ► Network (Network) SERVER IP 192.168.001.010 GATEWAY 192.168.001.065 NET MASK 255.255.255.000 DNS 168.095.001.001 WEB PORT 0080 REST DEFAULT NO Event Log Viewing To access the Event Log Viewin...

Page 23 - Recording Methods; these options are configurable through

23 HDD Status – This will display either the remaining HDD capacity in GB or OW to indicate that it is set to Overwrite. Video Loss - Screen will display if the video input is not connected properly. Recording Methods The DXR209 offers a variety of flexible recording modes. The unit can be set up to...

Page 25 - STEP 1: SOFTWARE INSTALLATION – STATIC IP SETTING:

25 Hardware Connection from DVR Static IP Setting 1. Put the attached CD into the CD-ROM. The application program will install on your PC. Note: The CD contains a self-running installation that automatically starts when the CD is inserted. Follow the instructions for installation as indicated in the...

Page 27 - STEP 2: STATIC IP SETTING; STEP 3: Connecting the PC and DVR via the Internet; and the default Password; admin; NETWORK; Static IP

27 6. After the installation, the following files listed below will appear in your assigned path or file folder. There will be 6 files and 1 folder. STEP 2: STATIC IP SETTING In the DVR MENU / NETWORK set the IP ADDRESS, GATEWAY, NET MASK, DNS and WEB PORT as provided from your local ISP (internet s...

Page 28 - Dynamic IP Setting; WHAT IS A DYNAMIC IP ADDRESS?; STEP 2: DDNS REGISTRATION FOR A DYNAMIC IP ADDRESS

28 Dynamic IP Setting WHAT IS A DYNAMIC IP ADDRESS? A Dynamic IP Address is an IP (Internet Protocol) address that changes each time you connect to the internet. This cuts down on the number of IP addresses large consumer providers need because not all of their customers are using the service at any...

Page 29 - Click on “Account” and “Add Host”; POWER

29 4. After registering your account, you will receive an e-mail, which contains instructions to activate your account. If you do not follow these directions within 48 hours, you will need to re-register your account. 5. Login your account. 6. Click on “Account” and “Add Host” 7. Users can set up th...

Page 32 - STEP 4: ROUTER SETTING

32 STEP 4: ROUTER SETTING (Please refer to your Router manual for the configuration ) NOTE: In the router setting, there are four steps to follow: 1. Dial setting 2. DHCP setting 3. Virtual server setting 4. DDNS setting 1. Click on “INTERNET PORT” and choose your WAN type (e.g. PPPoE). Enter your “...

Page 33 - ADSL modem

33 3. In the “ADVANCED SETUP / Virtual Server”. Choose “By Port” and set the “Port Number” to 80 for the Video Web Server. Set the “Local Server IP Address” to 192.168.1.10. (The default Video Web Server IP and port). Press add & save after you set up. 4. In the “ADVANCED SETUP / Dynamic DNS”, k...

Page 34 - STEP 7 : Connect to the DVR via the Internet; Address Book; You can press; Backup Program

34 STEP 7 : Connect to the DVR via the Internet 1. Change PC network setting to the original setting and link PC to the internet . 2. Click twice and enter your User name, Password and host on the Video Web Server. (Note: If you did not change the “Account” , the User Name and Password are both “adm...

Page 35 - Software Operation at the Remote Site

35 Software Operation at the Remote Site Follow the steps below to connect to a remote site. (e.g. If you set up the server at your office with one static ADSL, you can remotely watch the video anywhere, with a networkable computer.) Step 1: Click twice to enter the Login setup (please refer to “sof...

Page 36 - Control Panel and Basic Operation; A. Video Web Server control panel

36 Control Panel and Basic Operation A. Video Web Server control panel 1. Image transmission rate per second. 2. Data transmission rate. 3. Connection/Disconnection. 4. Resolution: D1,CIF 5. Image quality: High, Middle, Low. 6. Image adjusting: Brightness/ Contrast/ Saturation. 7. Snapshot: press th...

Page 37 - B. Digital device control panel; Play Back Operation; You will find the recorded file on the PC. Click twice to playback.; OW

37 B. Digital device control panel 1. CH1-9 2. 4cut, 7cut, 9cut, PIP 3. Zoom, Select, Lock, Record 4. Stop, Rewind, Fast Forward, Pause, Slow, Play 5. Menu (Exit), Left, Right, Up, Down 6. Enter 7. TURBO* Play Back Operation You will find the recorded file on the PC. Click twice to playback. 5 6 7 1...

Page 38 - Advanced Settings; ACCOUNT

38 Advanced Settings Click on “System Config” for advanced setting. ACCOUNT ALARM SYSTEM CONFIG NOTE :Apply-- After changing all setting, press “apply” to refresh the data. Reboot-- Press this button to restart setting. Set up the user’s account (Max 10 accounts), password and authority (Max 5 accou...

Page 41 - If you would like to download the Video Web Server

41 Step 2: Enter your Username and Password to login to the Video Web Server. Step 3: Click on “YES” to confirm that the Download Application is authentic and has been verified. Note: If you would like to download the Video Web Server Application you can do this by clicking this button and saving th...

Page 42 - Key Lock

42 Step 4: After you login, you will see the Video Web Server screen (example below). Key Lock For added security, you can Lock the buttons on your DXR209. Locking disables the functionality of the buttons and prevents accidental key presses from altering the operation of the DXR209. To enable the K...

Page 43 - Troubleshooting; MENU

43 Troubleshooting Check that the HDD has been installed correctly. No recorded video Check camera’s video cables and connections. Check monitor’s video cables and connections. Make sure that the camera is receiving power. No video Check that Timer / Alarm Enable is set to YES. Timer / Alarm recordi...

Page 44 - Technical Specifications

44 Technical Specifications Video format NTSC/EIA or PAL/CCIR Network Interface Ethernet (10100 Base-T) Protocols TCPIP, ICMP, SMTP, HTTP, FTP Triggers & Actions E-mail images or images uploaded to FTP site / Remote recording HDD storage IDE type, UDMA 66 above, 1 removable HDD supported Record ...

Page 45 - Appendix 1: Installing the HDD; Step 1: Remove the Cartridge Casing from the DXR209.; : The Cartridge must be unlocked to remove it, (please see; Step 2: Remove the Cover from the Cartridge Casing.

45 Appendix 1: Installing the HDD NOTE: The HDD has the same purpose in a DXR209 as a videocassette does in a VCR. However, installing the HDD is a bit more complicated. Please follow the next steps carefully in order to ensure proper installation. The compartment (with the handle) located on the fr...

Page 47 - Appendix 2: Connection Diagram to Cameras and Monitor

47 Appendix 2: Connection Diagram to Cameras and Monitor EXTERNAL I/O POWER 75Ω 2 CALL LOOP INPUT RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. HI 1 M...

Page 48 - Appendix 3: Pin Configurations; EXTERNAL ALARM COM

48 Appendix 3: Pin Configurations 25 Pin Com Port EXTERNAL ALAM NO EXTERNAL ALARM COM PIN OFF ALARM INPUT 9 ALARM INPUT 10 ALARM INPUT 11 ALARM INPUT 12 ALARM INPUT 13 ALARM INPUT 14 ALARM INPUT 15 ALARM INPUT 16 ALARM INPUT 1 ALARM INPUT 2 ALARM INPUT 3 ALARM INPUT 4 ALARM INPUT 5 ALARM INPUT 6 ALA...

Page 49 - Appendix 4: Rack Mount Installation

49 Appendix 4: Rack Mount Installation Screws and brackets for rack mounting applications can be purchased as an optional accessory. Front Angle with Rack Mount (Optional) Side View with Rack Mount (Optional) For more information about the rack mount & other accessories through Lorex, please vis...

Page 51 - Brand

51 Appendix 6: Compatible HDD Brands Manufacturer Model Capacity Rotation HITACHI Deskstar 180 GXP (120 GB) 120GB 7200 rpm HITACHI Deskstar 7K250, HDS722516VLAT20 160GB 7200rpm HITACHI Deskstar 7K250, HDS722525VLAT80 250GB 7200rpm IBM Deskstar 120GXP (80GB) 80GB 7200 rpm IBM Deskstar 120GXP (120GB) ...

Page 52 - It’s all on the web; V I S I T; Strategic Vista International Inc.

52 It’s all on the web Product Information User Manuals Quick Start Guides Specification Sheets Software Upgrades Firmware Upgrades w w w . l o r e x c c t v . c o m V I S I T Strategic Vista International Inc. www.lorexcctv.com