Lifebreath TFPC2000 - Manuals

2 TFP Directly Connected to Forced Air Heating System 1. Install 6” oval port collar (provided) on top and bottom of TFP (Fig. 1). Use (4) 8/32” X 3/8”screws (provided). 2. Remove protective backing from pieces offoam and stick them to the 4 corners of the TFPon the side being mounted against the pl...

3 TFP Connected to Heat Recovery Ventilator LOCATION The TFP should be located in the main trunk of the fresh air to house line, after the Heat Recovery Ventilator (HRV) and before any branch lines. (Fig. 3) MOUNTING1. Locate mounting bolts (4) on side of TFP cabinet for vertical hanging (Fig. 3) an...

TFP Independent Installation No HRV, Radiant Heating System LOCATION 1. A TFP is usually installed in a basement area where air flow noise will be negligible to the occu-pants. 2. A central location between the clean air supply grille and return grille is recommended. MOUNTING Refer to “Mounting” un...