Life fitness OHDCR - Manuals

Page 2 - PARTS LIST; Tools Required for Assembly

PARTS LIST PART # LEA7945001 LEA7762201 LEA7625201 LEA7908201 LEA7663901 LEA7908401 LEA7587501 LEA7601701 LEA7584401 LEA7584501 LEA7622401 LEA7605901 LEA7587901 LEA7587801 KEY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 QTY 2 4 2 2 2 2 10 4 2 2 2 2 2 2 KEY 15 16 17 18 19 20 21 22 23 24 25 PART # LEA7945201 LEA...

Page 4 - FIGURE 1

STEP 1: FIGURE 1 4 • LOOSELY assemble the four UPRIGHTS (2) to the two BASES (1) using eight 1/2 X 4-1/4” BOLTS (16), eight 1/2” PLASITC DOME WASHERS (17), eight 1/2” INT TOOTH LOCK WASHERS (19) and eight 1/2” LOCK NUTS (18) as shown in FIGURE 1. 1 18 19 17 16 2 1/2 X 4-1/4”

Page 5 - FIGURE 2

5 STEP 2: FIGURE 2 • LOOSELY assemble the two UPRIGHT SUPPORTS (3) to the four UPRIGHTS (2) using eight 1/2 X 4-1/4” BOLTS (16), eight 1/2” PLASITC DOME WASHERS (17), eight 1/2” INT TOOTH LOCK WASHERS (19) and eight 1/2” LOCK NUTS (18) as shown in FIGURE 2. 2 3 16 17 19 18 1/2 X 4-1/4”

Page 6 - FIGURE 3

6 STEP 3: FIGURE 3 • LOOSELY assemble the two CROSS SUPPORTS (4) and two PULL-UP SUPPORTS (5) using eight 1/2 X 4-1/2” BOLTS (20), sixteen 1/2” INT TOOTH LOCK WASHERS (19) and eight 1/2” LOCK NUTS (18) as shown in FIGURE 3. 4 18 19 5 20 19 2 1/2 X 4-1/2”

Page 7 - FIGURE 4

7 STEP 4: FIGURE 4 • LOOSELY assemble the two WEIGHT HORN UPRIGHTS (6) to the BASES (1) and CROSS SUPPORTS (4) using eight 1/2 X 4-1/4” BOLTS (16), eight PLASTIC DOME WASHERS (17), eight 1/2” INT TOOTH LOCK WASHERS (19) and eight 1/2” LOCK NUTS (18)as shown in FIGURE 4. 6 16 19 17 18 1/2 X 4-1/4” 4 ...

Page 8 - FIGURE 5

8 STEP 5: FIGURE 5 • LOOSELY assemble the two BAR HOLDERS (15) to the BASES (1) using four 1/2 X 4-1/2” BOLTS (16), four 1/2” PLASTIC DOME WASHERS (17), four 1/2” INT TOOTH LOCK WASHERS (19) and four 1/2” LOCK NUTS (18) as shown in FIGURE 5. 1 15 16 17 19 18 1/2 X 4-1/4”

Page 9 - Securely tighten all loose frame connections made to this point.

• Securely tighten all loose frame connections made to this point. 9

Page 10 - FIGURE 6

10 STEP 6: FIGURE 6 22 23 21 9 10 3/8 X 3-3/4” • Assemble the four ADJUSTABLE RACKS (9 &10) as show, using sixteen 3/8 X 3-3/4” FLAT HEAD BOLTS (21) sixteen 3/8” INT TOOTH LOCK WASHERS (22) and sixteen 3/8” LOCK NUTS (23) as shown in FIGURE 6. 10 9

Page 11 - FIGURE 7

11 STEP 7: FIGURE 7 • Assemble the WEIGHT HORNS (7) to the WEIGHT HORN UPRIGHTS (6) using twenty 1/2 X 4-1/4” BOLTS (16), twenty 1/2” INT TOOTH LOCK WASHERS (19) twenty 1/2” PLASTIC DOME WASHERS (17) and twenty 1/2” LOCK NUTS (18) as shown in FIGURE 7. 16 19 7 18 17 1/2 X 4-1/4” 6

Page 12 - FIGURE 8

12 STEP 8: FIGURE 8 • Assemble the four SWIVEL SPOTTERS (8) to the two UPRIGHT SUPPORTS (3), using eight 1/2 X 1-1/2 ” BOLTS (24), eight 3/8” INT TOOTH LOCK WASHERS (19), eight 1/2” FLAT WASHERS (25) and eight 3/8” LOCK NUTS (18). See FIGURE 8. 19 24 8 25 18 1/2 X 1-1/2 BOLT” • NOTE: THE 1/2” FLAT W...

Page 13 - FIGURE 9

13 STEP 9: FIGURE 9 • Insert BAR CATCHES (11 & 12) and the BAR SUPPORTS (13 & 14) into the desired slots of the ADJUSTABLE RACKS (9 & 10) as shown in FIGURE 9. 12 11 14 13 10 9

Page 14 - PREVENTATIVE MAINTENANCE TIPS; Consult your physician before beginning any exercise program.; WARRANTY INFORMATION

Clean: • Upholstery with mild soap and water.• Guide rods with a cotton cloth.• Hand grips with mild soap and water.• Frame damage can be repaired with touch-up paint can be purchased from your Hammer Strength customer service representative. Inspect: • Cables for wear or damage and proper tension (...