Page 2 - HAMMER STRENGTH HEAVY DUTY RACKS; PROPER USAGE; Do not remove labels for any reason. Labels contain important; MAINTAIN ALL EQUIPMENT:; Keep children away from strength equipment.
2 HAMMER STRENGTH HEAVY DUTY RACKS SAFETY & WARRANTY Purchasers of Hammer Strength products should read the Owner's Manual and all of the warning labels on the productsbefore using them. Because these products may be used in commercial settings, it is the purchaser's responsibility toinstruct al...
Page 3 - WARNING
3 5,13 5,4 49 ;D 3 2 1 , 3 9 1 ;5,10 0,0 80 ;5,17 1,1 98 ;5,27 3,5 05 ;5,18 1,8 96 ; D321, 027;5,066,003;D321, 389;5,135,456;D321, 387;5,125,881;6,203,474B1 5,044,631;D321,02 6;5,006,004;D321,39 0;5,180,354;5,273,504;5,050,873; This exercise machine is covered by one ormore of the following U.S.pate...
Page 4 - LIMITED WARRANTY; WHAT IS COVERED; 0 years on structural frame; WHAT IS NOT COVERED; Write the RA# on the outside of the carton; Life Fitness World Headquarters
4 LIMITED WARRANTY WHAT IS COVERED This Hammer Strength commercial exercise equipment (Signature Benches and Racks) is warranted to be free of alldefects in material and workmanship to the original purchaser for the specific items and duration listed: O 10 years on structural frame O 1 year on grips...
Page 5 - Certificate of insurance available upon request.
5 LIMITED WARRANTY EXCLUSIVE WARRANTY THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND EITHER EXPRESSED ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESSFOR A PARTICULAR PURPOSE, AND ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR PART. We ...
Page 8 - NOTE; openings facing each other.
8 STEP 1: LOOSELY assemble both FRONT LEFT UPRIGHTS (1) to the LOWER LEFT BASE (2) using four 1/2 X 4-1/2”BOLTS (3), four BACKING DOME WASHERS (4), four 1/2” INT LOCK WASHERS (5), and four 1/2” LOCK NUTS(6). LOOSELY assemble both FRONT RIGHT UPRIGHTS (7) to the LOWER RIGHT BASE (8) using four 1/...
Page 14 - Securely tighten all loose assemblies.
14 21 22 23 20 4 5 6 19 9 1 7 STEP 7: Assemble the SHORT BENCH LOCK (19) to the REAR CROSS BRACE (9) using two 1/2 X 3-1/2” BOLTS (20), twoBACKING DOME WASHERS (4), two 1/2” INT LOCK WASHERS (5), and two 1/2” LOCK NUTS (6). Insert the LEFT BAR SUPPORT (21) into the desired slots of the FRONT LEF...
Page 16 - Preventative Maintenance Tips; Action Daily
16 Clean: • Hand grips with mild soap and water.• Frame damage can be repaired with touch-up paint can be purchased from your Hammer Strength customer service representative. Inspect: • Hardware should be checked for looseness. Tighten as required.• Frames should be inspected for wear or damage.• Ha...