Life fitness GS5 - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFETY INFORMATION; TABLE OF CONTENTS

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES ! 1. Before using, read all the warnings and instructionson the use of this machine including the wall chart andinstructional DVD. Use only for intended exercise. DO NOT modify the machine. 2. ...

Page 3 - COMPONENTS LIST

3 COMPONENTS LIST * 9/16” wrench* 8mm Allen wrenche* 4 mm Allen wrench* 3/4 Wrench* Phillups Screw Driver REQUIRED TOOLS: 6 4 2 1 3 ITEM NO. QTY . PA RT NO. DESCRIPTION 1 2 LEA 7801595 SHROUD, G5 WEIGHT STA CK 2 1 LEA 7822495 PTD A SSY , SHROUD BRA CKET TOP 3 1 LEA 7822595 PTD A SSY , SHROUD BRA CKE...

Page 4 - FIGURE 1; Disassemble one cable end and remove cable.; CABLE END ASSEMBLY

4 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 FIGURE 1 STEP 1: Disassemble one cable end and remove cable. Remove TOP COVER and TOP SHROUD from machine. Remove WEIGHT PLATES. CABLE END ASSEMBLY TOP COVER REMOVE THIS CABLE ONLY TOP SHROUD WEIGHT PLATES

Page 5 - FIGURE 2; Discard CAP SCREWS shown above

5 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 FIGURE 2 STEP 2: Remove entire WEIGHT PLATE GUIDE ASSEMBLY AS SHOWN IN FIGURE ABOVE . Discard CAP SCREWS shown above NOTE: YOU WILL NEED TO RE-ASSEMBLE. THEREFORE, IT IS IMPORTANT THATYOU REMEMBER THE PROPER ORDER OF ALL COMPONENTS AS SHOWN. IF NEED BE REF...

Page 6 - FIGURE 3; as shown in figure above.

6 FIGURE 3 STEP 3: Slide one SHROUD (1) into back of machine and slide forward to make room forWEIGHT PLATE and GUIDE ASSEMBLY. Place BOTTOM SHROUD BRACKET (3) on G5 BASE. Re-install WEIGHT GUIDE ASSY. Including new SHROUD BRACKETS, TOP(2) and BOTTOM (3) as shown in figure above. 2 3 1 5

Page 7 - Slide all WEIGHT PLATES back into position.; FIGURE 4

STEP 4: Securely assemble TOP SHROUD to gym using two 3/8 X 3-3/4 CAPS SCREWS (5)and the G5 hardware. Re-install CABLE and CABLE END: REFER TO FIG 1 CAREFULLY Slide all WEIGHT PLATES back into position. FIGURE 4 7 3/8 x 3-1/2 TIGHTEN SECURELY TOP SHROUD WEIGHT PLATES 5

Page 8 - Place TOP COVER back into position and tighen with screws.; FIGURE 5

STEP 5 Place other SHROUD (1) into back of gym as shown above and securely tighten both SHROUDS (1) toTOP SHROUD BRACKET (2) and BOTTOM SHROUD BRACKET (3) using eight 3/8 WASHERS(6) and eight 3/8 X 3/4 CAP SCREWS (4). Place TOP COVER back into position and tighen with screws. 8 FIGURE 5 1 6 4 TO...

Page 9 - Important Customer Purchase Information:

MAINTENANCE 9 * We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water. Touch-up paint can be purchased from your Life Fitness customer service representative at (800) 328-9714.(Outside of the U.S. and Canada, +1-847-288-3300) * Inspect equipment daily. Tighte...

Page 10 - L IM IT E D W AR R AN T Y

10 L IM IT E D W AR R AN T Y L ife F itn e s s W eig ht S ta ck S h ro u d G 5 Life F itness extends the following LIM ITE D W A R RA N T Y to the original owner (proof of purc has e required, k eep yourrec eipt with this m anual) of the Life F itnes s produc t. T he W arranty term s apply to IN H O...