Life fitness 880 - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFETY INFORMATION; TABLE OF CONTENTS

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES ! 1. Before using, read all the warnings and instructionson the use of this machine. Use only for intendedexercise. DO NOT modify the machine. 2. Obtain a medical exam before beginning anyexerc...

Page 3 - BOLT LENGTH RULER:; Bolt Length Ruler; BOLT LENGTH

IMPORTANT NOTES Please note: Tools Required for Assembly * Thank you for purchasing the ParaBody 880 Gym System. Please read these instructions thoroughly and keep them for future reference. * Rubber mallet or hammer* 3/4” wrench* 9/16” wrench* Ratchet with 3/4” and 9/16” sockets* 5/32” Allen wrench...

Page 5 - PARTS LIST

PARTS LIST PAR T # 7 1 3 9 7 0 8 7 1 3 9 8 0 8 6 9 9 4 7 2 1 7 1 4 5 0 0 2 6 5 2 3 4 0 1 7 1 3 9 9 0 8 6 9 4 0 8 0 8 7 1 4 0 1 0 8 7 1 4 0 2 0 8 7 1 2 9 5 0 8 7 0 7 5 8 0 8 7 1 4 9 3 0 8 7 0 6 1 6 0 8 7 0 6 1 3 0 8 7 0 6 1 8 0 8 7 0 7 6 2 0 8 7 1 4 0 3 0 2 7 1 4 0 4 0 2 6 5 4 9 3 0 1 7 0 1 2 1 0 2 6...

Page 7 - FIGURE 1

FIGURE 1 7 STEP 1: 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • SECURELY assemble the REAR UPRIGHT (6) to the BASE FRAME (9) using two 3/8 X 3-3/4” BOLTS (93), two 3/8 X 4” BOLTS (94), six 3/8” WASHERS (80) and four 3/8” LOCK NUTS (82) as shown in FIGURE 1. 3/8 X 4” 94 8 0 8 2 6 9 94 3/8 X 4” 93 3/8 X 3-...

Page 8 - FIGURE 2

FIGURE 2 STEP 2: • LOOSELY assemble two BASE PLATES (11) to the REAR UPRIGHT (6) using two 3/8 X 3-3/4” BOLTS (93) and two 3/8” LOCK NUTS (82). See FIGURE 2. 6 3/8 X 3-3/4” 93 11 8 2 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 8

Page 9 - FIGURE 3

9 FIGURE 3 STEP 3: • Assemble the RIGHT PEC ARM (13) and LEFT PEC ARM (14) to the 16-1/4” TUBE (12) and PEC PLATE (15) using two 1/2 X 6” BOLTS (97), two 1/2” WASHERS (81), four 3/4” FLANGE BEARINGS (53), two 3/4” X 3-5/16” SHAFTS (100) and two1/2” LOW HEIGHT LOCK NUTS (85) as shown in FIGURE 3. 8 1...

Page 10 - FIGURE 4

1 0 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 STEP 4: • SECURELY assemble the PEC PLATE (15) and the 16-1/4” TUBE (12) to the REAR UPRIGHT (6) using two 3/8 X 2-3/4” BOLTS (90) and two 3/8” LOCK NUTS (82) as shown in FIGURE 4. FIGURE 4 3/8 X 2-3/4” 90 1 2 8 2 1 5 6 1 4 1 3

Page 11 - FIGURE 5

FIGURE 5 11 STEP 5: 1 3/8 X 3-3/4” 93 11 1 5 8 2 • SECURELY assemble the PEC PLATE (15) and the BASE PLATES (11) to the FRAME (1) using one 3/8 X 3-3/4” BOLT (93), one 3/8 X 4” BOLT (94) and two 3/8” LOCK NUTS (82) as shown in FIGURE 5. 3/8 X 4” 94

Page 12 - FIGURE 6

1 2 STEP 6: FIGURE 6 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • Repeat the previous steps to assemble the RIGHT PEC HANDLE (17) and the RIGHT PEC ARM (13) as shown in FIGURE 6. • Assemble the LEFT PEC ARM (14) to the LEFT PEC HANDLE (18) using two 3/4” FLANGE BEARINGS (53), one STARLOCK COLLAR (60) and...

Page 14 - FIGURE 9

FIGURE 9 STEP 9: 1 4 • Insert two GUIDE RODS (5) into the BASE FRAME (9) as shown on FIGURE 4. (NOTE: If the 880 SHROUD OPTION was purchased, place the GUIDE RODS (5) through the BOTTOM SHROUD BRACKET (found in SHROUD OPTION box)and into the BASE FRAME (9) as shown in FIGURE 9. • Slide two WEIGHT ST...

Page 46 - LIMITED WARRANTY

4 6 NOTES: LIMITED WARRANTY ParaBody extends the following LIMITED WARRANTY to the original owner of the ParaBody products. The Warranty terms apply to IN HOME USE ONLY. 1. LIMITED WARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repaired ...