Life fitness 874 - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFETY INFORMATION; TABLE OF CONTENTS

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES ! 1. Before using, read all the warnings and instructionson the use of this machine. Use only for intendedexercise. DO NOT modify the machine. 2. Obtain a medical exam before beginning anyexerc...

Page 3 - Bolt Length Ruler

IMPORTANT NOTES Please note: Tools Required for Assembly * Thank you for purchasing the ParaBody 874 Multi-Angle Bench System. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function. 3 NOTE: ...

Page 5 - PARTS LIST; FIGURE 1

5 PARTS LIST PART # LEA6650609 LEA6650109 LEA6649309 LEA6624210 LEA6624310 LEA6259109 LEA6655709 LEA6654521 LEA6654421 LEA6406401 LEA6412001 LEA6236701 LEA6692601 LEA6405201 LEA7234801 KEY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 QTY 1 1 1 1 1 1 1 1 1 2 1 1 1 1 4 PART # LEA6145801 LEA3235204 LEA3235212 L...

Page 6 - FIGURE 2

6 FIGURE 2 STEP 2: 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • SECURELY assemble the FRONT BASE (6) to the BENCH FRAME (1) using two 3/8 X 3” BOLTS (18), four 3/8” WASHERS (19), and two 3/8” LOCK NUTS (20). See FIGURE 2. • Slide four 2” SQ. COVER CAPS (15) over the ends of the FRONT & REAR BASE (6 &...

Page 7 - FIGURE 3

7 STEP 3: FIGURE 3 • Insert one 1-3/4” END CAP (12) into the end of the ADJUSTABLE SLIDE (2) as shown in FIGURE 3. • Attach eight 3/4 X 1-1/2” GLIDES (28) to the inside of the ADJUSTABLE SLEEVE (3) as shown in FIGURE 3 using the following steps: • Thoroughly clean all surfaces where the 3/4 X 1-1/2”...

Page 8 - FIGURE 4

8 STEP 4: FIGURE 4 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • Assemble the LEFT and RIGHT BACK PAD ANGLE (4 & 5) and two HINGE TABS (10) to the BENCH FRAME (1) using one 1/2 X 8” BOLT (23) and one 1/2” LOW HEIGHT LOCK NUT (24) as shown in FIGURE 4. 10 1 2 5 4 1/2 X 8” 23 24 1/2” LOW HEIGHT 24 1/2” ...

Page 9 - FIGURE 5

9 STEP 5: FIGURE 5 • SECURELY assemble the SEAT PAD (8) to the HINGE TABS (10) using two 3/8 X 1” BOLTS (17) and two 3/8” WASHERS (19) as shown in FIGURE 5. 3/8 X 1” 17 19 10 13 14 9 8 4 5 • SECURELY assemble the BACK PAD (9) to the LEFT BACK PAD ANGLE (4) and the RIGHT BACK PAD ANGLE (5) using four...

Page 10 - MAINTENANCE

MAINTENANCE MODEL #________________________ SERIAL #_________________________ DATE OF PURCHASE: _____________ DEALERS NAME: _________________ DEALERS PHONE #_______________ 1 0 * We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water. Touch-up paint can be pur...

Page 11 - LIMITED WARRANTY

11 NOTES: LIMITED WARRANTY ParaBody extends the following LIMITED WARRANTY to the original owner of the ParaBody products. The Warranty terms apply to IN HOME USE ONLY. 1. LIMITED WARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repaired o...