Life fitness 8105 - Manuals

Page 2 - BOLT LENGTH RULER:; Bolt Length Ruler; BOLT LENGTH; Consult your physician before beginning any exercise program.

2 IMPORTANT NOTES Please note: Tools Required for Assembly * Thank you for purchasing the LIFE FITNESS 8105 SMITH PRESS. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, levelsurface to assure its proper function. 2 NOTE: BOLT LE...

Page 3 - PARTS LIST; FIGURE 1

PARTS LIST PART # 6712002 6711402 6711203 6708901 6711601 6711701 6710201 6710102 6710503 6710403 6787301 6709001 6709901 6709603 6675501 KEY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 QTY 2 2 1 2 1 1 1 2 1 1 1 2 2 2 6 PART # 3102937 3102917 3102933 3103003 3102502 3102801 3102802 3203001 3203002 3202901 6...

Page 4 - CAREFULLY; FIGURE 2

• CAREFULLY lower one COUNTER WEIGHT (14) down into the LEFT UPRIGHT (9) & RIGHT UPRIGHT (10) until it bottoms out as shown in FIGURE 2. 4 FIGURE 2 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 STEP 2: 10 14 9 14

Page 5 - FIGURE 3; LOOSELY

5 FIGURE 3 STEP 3: • LOOSELY assemble the LOWER SUPPORT (3) and two PLATE HOLDER (15) to the LEFT & RIGHT UPRIGHTS (9& 10) using four 1/2 X 4-1/2” BOLTS (16) and four 1/2” LOCK NUTS (21) as shown in FIGURE 3. 1/2 X 4-1/2” 16 15 21 3 9 10 15 1/2 X 4-1/2” 16

Page 6 - FIGURE 4; SECURELY

6 FIGURE 4 • SECURELY assemble four PLATE HOLDERS (15) to the LEFT & RIGHT UPRIGHTS (9 & 10) using eight 1/2 X 4” BOLTS (17), eight 1/2” WASHERS (20), and eight 1/2” LOCK NUTS (21) as shown in FIGURE 4. STEP 4: 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 1/2 X 4” 17 10 9 21 20 15

Page 7 - FIGURE 5

7 STEP 5: • LOOSELY assemble two CHROME ANGLES (12) to the top of the LEFT & RIGHT UPRIGHTS (9 & 10) using four 1/2 X 4-1/ 2” BOLTS (16), and four 1/2” LOCK NUTS (21) as shown in FIGURE 5. (NOTE: MAKE SURE CABLE IS BETWEEN THE TWO BOLTS.) FIGURE 5 16 1/2 X 4-1/2” 1/2 X 4” 17 10 9 12 21 21 12...

Page 8 - FIGURE 6

8 FIGURE 6 STEP 6: • LOOSELY assemble UPPER SUPPORT (11) to the LEFT & RIGHT UPRIGHTS (9 & 10) using two 1/2 X 4” BOLTS (17) two 1/2” WASHERS (20) and two 1/2” LOCK NUTS (21) as shown in FIGURE 6. (NOTE: MAKE SURE CABLE IS INSIDE OF THE 1/2” BOLT AS SHOWN IN DETAIL.) 21 11 0 1 2 3 4 5 6 1/2 ...

Page 9 - FIGURE 7

9 FIGURE 7 STEP 7: • SECURELY assemble the 4-1/2” PULLEYS (27) to the UPPER SUPPORT (11) using two 3/8 X 2” BOLTS (18) and two 3/8” LOCK NUTS (22) as shown in FIGURE 7. • Finish the assembly of the UPPER SUPPORT (11) to the LEFT & RIGHT UPRIGHTS (9 & 10) using two 1/2 X 4” BOLTS (17), two 1/...

Page 10 - FIGURE 8

10 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 FIGURE 8 STEP 8: • Insert two 80” GUIDE RODS (13) through the BUSHINGS in the UPPER SUPPORT (11) and out through the top, then lower the GUIDE RODS (13) down into the BUSHING on the BASE of the UPRIGHTS (9 & 10) as shown in FIGURE 8. BUSHING 11 13

Page 16 - • SECURELY

16 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 FIGURE 16 STEP 16: • SECURELY assemble threaded end of CABLE ASSEMBLIES (26) into the BEARING HOUSINGS (1) using one 1/2” WASHER (20) on each side as shown in FIGURE 16. 26 8 20 • NOTE: Lubricate the GUIDE RODS (13) with a light oil or lubricant that is avail...

Page 17 - MAKE SURE ALL CONNECTIONS ARE TIGHT!

17 FIGURE 17 STEP 17: • MAKE SURE ALL CONNECTIONS ARE TIGHT! Thank you for purchasing the Life Fitness 8105 SMITH PRESS. If unsure of proper use of equipment, call your local Life Fitness distributor or call the Life Fitness customer service department at (800) 328-9714.