Life fitness 807 - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFETY INFORMATION; TABLE OF CONTENTS

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES ! 1. Before using, read all the warnings and instructionson the use of this machine. Use only for intendedexercise. DO NOT modify the machine. 2. Obtain a medical exam before beginning anyexerc...

Page 3 - BOLT LENGTH RULER:; Bolt Length Ruler; BOLT LENGTH

IMPORTANT NOTES Please note: Tools Required for Assembly * Thank you for purchasing the ParaBody 807 Gym System. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function. 3 NOTE: BOLT LENGTH IS...

Page 5 - PARTS LIST; KEY

PARTS LIST KEY 123456789 1 0 11 1 21 31 41 51 61 71 81 92 02 12 22 32 42 52 62 72 82 93 03 13 23 3 5 PART # 70589086407508 6111002 6406602640780264073026407202602470264064016406501612510161946016654521665412131029093102922310290431029103102501310260131028023102502623670131028046412001602060131054013...

Page 6 - FIGURE 1

0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 FIGURE 1 STEP 1: 28 4 25 10 31 • Attach eight PARAGLIDE STRIPS (31) to the WOLFF SLEEVE (4) (FOUR ON EACH END) as shown in FIGURE 1 using the following steps: • Thoroughly clean all surfaces where the PARAGLIDE STRIPS are to be attached. • Remove the PARAGLIDE S...

Page 7 - FIGURE 2

7 FIGURE 2 STEP 2: 4 10 5 2 • Pull back the SPRING PIN on the WOLFF SLEEVE (4) and slide it over the end of the BENCH FRAME (2) as shown in FIGURE 2. Engage the SPRING PIN into one of the adjustment holes. • Insert two 2” SQ. END CAPS (33) into both ends of the BASE LEG (5) as shown in FIGURE 2. • I...

Page 8 - FIGURE 3

8 FIGURE 3 33 33 1 STEP 3: • Secure the WOLFF SLEEVE (4) in place with one THUMBSCREW (29). • Insert four 2” SQ. END CAPS (33) into the BASE TUBES of the UPRIGHT FRAME (1) as shown in FIGURE 3. • SECURELY assemble the BENCH FRAME (2) to the UPRIGHT FRAME (1) using two 3/8 X 3” BOLTS (17), one 3/8 X ...

Page 9 - FIGURE 4

9 FIGURE 4 1 31 STEP 4: 30 6 29 • Attach eight PARAGLIDE STRIPS (31) to both UPRIGHT TUBES on the UPRIGHT FRAME (1) (FOUR ON EACH END) as shown in FIGURE 4 using the following steps: • Thoroughly clean all surfaces where the PARAGLIDE STRIPS are to be attached. • Remove the PARAGLIDE STRIPS from the...

Page 10 - FIGURE 5

1 0 FIGURE 5 13 STEP 5: 9 3/8 X 1” 15 20 4 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • To assemble the SEAT PAD (13) to the WOLFF SLEEVE (4), start by sliding two HINGE TABS (9) over the PIN of the WOLFF SLEEVE (ONE ON EACH SIDE) as shown in FIGURE 5, and SECURELY assemble each HINGE TAB (9) to the SEAT...

Page 11 - FIGURE 6

11 FIGURE 6 9 STEP 6: 14 3/8 X 1” 15 20 4 • To assemble the BACK PAD (14) to the WOLFF SLEEVE (4), slide the two remaining HINGE TABS (9) over the PIN of the WOLFF SLEEVE (ONE ON EACH SIDE) as shown in FIGURE 6, and SECURELY assemble each HINGE TAB (9) to the BACK PAD (14) using two 3/8 X 1” BOLTS (...

Page 12 - FIGURE 7

1 2 FIGURE 7 7 23 STEP 7: 12 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • Insert one 1-3/4” SQ. END CAP (23) into the top of the LEG EXTENSION NECK (7) as shown in FIGURE 7. • Slide two ROLLER PADS (12) over each end of the SHAFT of the LEG EXTENSION NECK (7), as shown in FIGURE 7, and secure in place us...

Page 13 - FIGURE 8

FIGURE 8 STEP 8: 23 32 1 3 • Insert three 1-3/4” SQ. END CAPS (23) into the ends of the LEG EXTENSION (8) as shown in FIGURE 8. • Insert two 1/2” FLANGE BEARINGS (26) into the BUSHING on the LEG EXTENSION (8) as shown in FIGURE 8. • Assemble the LEG EXTENSION (8) to the LEG EXTENSION NECK (7) as sho...

Page 14 - FIGURE 9

1 4 FIGURE 9 STEP 9: 2 • When ready to perform LEG CURLS or LEG EXTENSION, pull up slowly on the front of the BENCH FRAME (2) and allow the U-PIN (10) to rest on top of the TAB of the BASE LEG (5). (NOTE: THE BENCH FRAME MUST BE ADJUSTED UP WHEN USING THE LEG EXTENSION TO ALLOW PROPER CLEARANCE FOR ...

Page 15 - THIS CONCLUDES THE ASSEMBLY OF THE 807 BODYSYSTEM WORKOUT CENTER

1 5 FIGURE 10 1 STEP 10: 3 • Set the HEIGHT ADJUSTMENT BAR (3) across the UPRIGHT FRAME (1) as shown in FIGURE 10, for performing INCLINE, or MILITARY PRESSES. When performing DIPS, use the HEIGHT ADJUSTMENT BAR (3) to hold the BACK PAD forwardas shown in the WORKOUT MANUAL. • Follow the WORKOUT MAN...

Page 17 - LIMITED WARRANTY

1 7 NOTES: LIMITED WARRANTY ParaBody extends the following LIMITED WARRANTY to the original owner of the ParaBody products. The Warranty terms apply to IN HOME USE ONLY. 1. LIMITED WARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repaired ...