Liebherr liebherr - Manuals

GB 17 Before fitting the door panels Remove the cover 1 and unscrew the attachment bracket 2 from the refrigerator doors. These attachment brackets will be mounted onto the refrigerator door panels. Important! The securing nuts are needed for re-mounting the pre- assembled door panels onto the refri...

18 Mounting the attachment brackets onto the door panels Mark lines on the refrigerator door panels as shown in Fig. A. Align the dismounted brackets of the refrigerator doors to the lines on the refrigerator door panels as shown in Fig. A 1. Fasten each bracket with any hole wherever possible using...

GB 19 Mounting the refrigerator panel The description is for one panel only. The procedure is the same for both panels. fig. B fig. C fig. D 1. Open the refrigerator door and suspend the refrigerator panel on the top adjusting pins (fig. B) . 2. Screw securing nuts onto the adjusting pins and slight...

GB 21 Mounting the dust filter The supplied dust filter prevents that dirt enters the motor compart- ment, reducing the refrigeration performance. Therefore always install the dust filter.1. Pull the bottom freezer drawer right out. 2. Remove the protective film from the dust filter. Insert the filt...