Liebherr 7082 133-00 - Manuals

GB 17 Before fitting the door panels Remove the cover 1 and unscrew the top and bottom attach- ment brackets 2 from the refrigerator door. These attachment brackets will be mounted onto the refrigerator door panel. Important! The securing nuts are needed for re-mounting the pre- assembled door panel...

18 Mounting the attachment brackets onto the door panels 1. Draw a line 1041 mm from the bottom side of the door panel.2. Draw a further line 107.5 mm from the bottom side of the door panel.3. Align one of the refrigerator door attachment brackets to the top line, as shown in the illustration below,...

GB 19 Mounting the refrigerator panel fig. A fig. B fig. C fig. D 1. Screw in the adjusting pins on the underside of the refrigerator door completely (fig. A). 2. Open the refrigerator door and suspend the refrigerator panel on the top adjusting pins (fig. B). 3. Screw securing nuts onto the adjusti...

20 fig. E fig. F 8. Remove the adjusting pins (bottom of the refrigerator door) until these touch the attachment bracket (fig. E). 9. Screw on the securing nuts and tighten (fig. F). 11. Click the top and bottom covers into place (fig. H). fig. H fig. G 10. Undo the three screws on the top of the at...