LG W2452T-TF - Manuals

LG W2452T-TF Monitor – User Manual in PDF format online.

Manuals:

User Manual

User Manual LG W2452T-TF

Summary

Page 2 - On Safety; Do not Open the Display.; Important Precautions

A1 This unit has been engineered and manufactured to ensure your personalsafety, however improper use may result in potential electrical shock or firehazards. In order to allow the proper operation of all safeguardsincorporated in this display, observe the following basic rules for itsinstallation, ...

Page 3 - On Installation; screen because over-spraying may cause electrical shock.; On Repacking

A2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place thedisplay where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink,laundry tub, in a wet basement, or near a ...

Page 4 - Connecting the Display; Important; Connecting the stand

A3 Connecting the Display Important This illustration depicts the general model of connection. Your monitor may differ fromthe items shown in the picture.Do not carry the product upside down holding only the stand base. The product mayfall and get damaged or injure your foot. Before setting up the m...

Page 5 - Disassembling the stand

A4 Connecting the Display Disassembling the stand 1. Put a cushion or soft cloth on a flat surface. 2. Place the monitor face down on the cushion or soft cloth. 4. Loosen the screw, then take off the stand base from stand body. 5. Please pull the stand body lightly to separate it from the hinge body...

Page 6 - Positioning your display; Ergonomic

A5 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range: -5˚~20˚ Ergonomic It is recommend...

Page 7 - Using the Computer

A6 Using the Computer 1. Make sure to turn off the computer and product. Connect the cable as below sketch mapform to . 1 3. Press button on the front switch panel to turn the power on.When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. (Only Analog Mode) NO...

Page 8 - Control Panel Functions; Front Panel Controls

Control Function A7 Control Panel Functions MENU Button Use this button to enter or exit from the On Screen Display. FUN Button Use this button to enter EZ ZOOMING , 4:3 IN WIDE , PHOTO EFFECT , SOUND items, for more information, refer to page A15-A16. Use this button to enter On Screen Display Sub-...

Page 10 - On Screen Display (OSD) Control Adjustment; Screen Adjustment; MENU Button

A9 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters ofthe display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls.The follow...

Page 11 - On Screen Display(OSD) Selection and Adjustment

A10 NOTE The order of icons may differ depending on the model (A10~A17 ). On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment,and setting menus. EZ ZOOMING To adjust the resolution 4:3 IN WIDE To adjust the image size PHOTOEFFEC...

Page 12 - Press the MENU Button, then the main menu of the OSD appears.

Sub-menus A11 On Screen Display(OSD) Selection and Adjustment NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptio...

Page 13 - Main menu

A12 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description BRIGHTNESS CONTRAST GAMMA To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50/0/50On the monitor, high gamma valuesdisplay whitish images and low gammavalues d...

Page 16 - FUN

A15 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description EZ ZOOMING The OSD screen will appear when you touch the FUN button on the left bottom of the monitor. At the current display, use ' AUTO/SET ' button to select 'EZ ZOOMING', then the displayresolution is transferred ...

Page 17 - PHOTO EFFECT

A16 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PHOTO EFFECT - NORMAL: The PhotoEffect function is disabled. - GAUSSIAN BLUR: This option is to add the effect to the screenthat the dark and sharp image becomesbrighter and more blurred. - SEPIA: This option changes ...

Page 19 - Troubleshooting; Check the following before calling for service.; No image appears

A18 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a "OSD LOCKED" message on the screen? ● Is the power cord of the display connected? ● Is the power indicator light on? ● Is the power on and the power indicator blue orgreen? ● Is...

Page 20 - Display image is incorrect

A19 Troubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, verticalbars or stripes arevisible. ● Any horizontal noise appearing in anyimage or charactersare not clearlyportrayed. • Press the AUTO/SET button to automatically adjust your display image t...

Page 21 - Have you installed the display driver?; Have you installed the; The screen color is

A20 Troubleshooting Have you installed the display driver? ● Have you installed the display driver? ● Do you see an "Unrecognized monitor,Plug&Play (VESA DDC)monitor found"message? • Be sure to install the display driver from the display driver CD (or diskette) that comes with yourdispla...

Page 22 - Specifications

A21 A21 A21 Specifications NOTE Information in this document is subject to change without notice. Display Sync Input Video Input Resolution Plug&Play PowerConsumption Dimensions &Weight Tilt Range Swivel Range Power Input Environmental Conditions Stand Base Signal cable Power cord 24 inches ...

Page 23 - Indicator; LED Color

A22 Specifications Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 123456789 10111213141516 *17 640 x 480640 x 480720 x 480720 x 400800 x 600800 x 600 1024 x 7681024 x 7681152 x 8641280 x 7681280 x 768 1280 x 10241280 x 10241600 x 12001680 x 10501680 x 10501920 x 1200 31.46937....

Page 24 - Digitally yours