LG W2234S-BN - Manuals

LG W2234S-BN Monitor – User Manual in PDF format online.

Manuals:

User Manual

User Manual LG W2234S-BN

Summary

Page 2 - On Safety; Do not Open the Display:; On Installation; Important Precautions

A1 This unit has been engineered and manufactured to ensure your personal safety,however improper use may result in potential electrical shock or fire hazards. Inorder to allow the proper operation of all safeguards incorporated in this display,observe the following basic rules for its installation,...

Page 3 - On Cleaning; screen because over-spraying may cause electrical shock.; On Repacking; your local authority.

A2 Important Precautions Do not use this display near water such as near a bathtub, washbowl, kitchensink, laundry tub, in a wet basement, or near a swimming pool.Displays are provided with ventilation openings in the cabinet to allow the releaseof heat generated during operation. If these openings ...

Page 4 - Connecting the Display; Important; Connecting the stand

A3 Connecting the Display Important This illustration depicts the general model of connection. Your monitor may differ fromthe items shown in the picture.Do not carry the product upside down holding only the stand base. The product mayfall and get damaged or injure your foot. Before setting up the m...

Page 5 - Disassembling the stand

A4 Connecting the Display Disassembling the stand 1. Put a cushion or soft cloth on aflatsurface. 2. Place the monitor face Down onthe cushion or soft cloth. 3. Hold the Head Part with one hand andhold the Stand Base Part with the otheras shown in the picture and pull theStand Base Part lightly upwa...

Page 6 - Positioning your display; Ergonomic

A5 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5˚~20˚ Ergonomic It is recommen...

Page 7 - Using the Computer; Power Cord; Signal Cable

A6 Using the Computer 1. Make sure to turn off the computer and product.Connect Signal cable and Power cord in order, then tighten the screw of thesignal cable. 1 2. Press button on the front switch panel to turn the power on. When monitor power is turned on, the 'SelfImage Setting Function' is exec...

Page 8 - Control Panel Functions; MENU Button; MENU button; Front Panel Controls; WIDE

A7 Control Panel Functions 4 : 3 in WideButton MENU Button Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current controlsettings, so that they cannot be inadvertently changed.Press and hold the MENU button for several seconds. The me...

Page 9 - Power Button

A8 Control Panel Functions This Indicator lights up blue when the display operatesnormally(On Mode). If the display is in Sleep Mode(Energy Saving), this indicator color changes to amber. Use this button to turn the display on or off. Power Button Power Indicator Use this button to enter a selection...

Page 10 - On Screen Display (OSD) Control Adjustment; Screen Adjustment; To make adjustments in the On Screen Display, follow these steps:

A9 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters ofthe display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls.The follow...

Page 11 - On Screen Display(OSD) Selection and Adjustment; PICTURE; HORIZONTAL

A10 NOTE The order of icons may differ depending on the model (A10~A14). On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment,and setting menus. PICTURE COLOR POSITION TRACKING SETUP Main menu Sub menu Reference PRESET sRGB 6500K...

Page 12 - Press the MENU Button, then the main menu of the OSD appears.; P I C T U R E

A11 On Screen Display(OSD) Selection and Adjustment NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptions of the ...

Page 13 - Main menu

A12 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description BRIGHTNESS CONTRAST GAMMA Adjusts the brightness of the screen. Adjusts the contrast of the screen. Set your own gamma value. : -50/0/50On the monitor, high gamma valuesdisplay whitish images and low gammavalues displ...

Page 14 - TRACKING; POSITION

A13 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description CLOCK PHASE SHARPNESS Adjusts any vertical bars or stripesvisible on the screen background.The horizontal screen size will alsochange. Adjusts the focus of the display. This item allows you to remove anyhorizontal noi...

Page 15 - SETUP

A14 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description MENU : Exit : Adjust: Adjust SET : Select another sub-menu SETUP S E T U P S E T U P If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function ag...

Page 16 - Troubleshooting; Check the following before calling for service.; No image appears

A15 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a "OSD LOCKED" message on the screen? ● Is the power cord of the display connected? ● Is the power on and the power indicator blue orgreen? ● Is the power indicator amber? ● Do yo...

Page 17 - Display image is incorrect

A16 Troubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, verticalbars or stripes arevisible. ● Any horizontal noise appearing in anyimage or charactersare not clearlyportrayed. • Press the AUTO/SET button to automatically adjust your display image t...

Page 18 - Have you installed the display driver?; Have you installed the; The screen color is

A17 Troubleshooting Have you installed the display driver? ● Have you installed the display driver? ● Do you see an "Unrecognized monitor,Plug&Play (VESA DDC)monitor found"message? • Be sure to install the display driver from the display driver CD (or diskette) that comes with yourdispla...

Page 19 - Specifications

A18 Specifications W1934S NOTE Information in this document is subject to change without notice. Display Sync Input Video Input Resolution Plug&Play PowerConsumption Dimensions & Weight Range Power Input Environmental Conditions Stand Base Power cord 19 inches (48 cm) Flat Panel Active matri...

Page 21 - Indicator; LED Color

A20 Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 123456789 1011121314 *15 16 640 x 350720 x 400640 x 480640 x 480800 x 600800 x 600832 x 624 1024 x 7681024 x 7681152 x 8701152 x 900 1280 x 10241280 x 1024 1440 x 9001440 x 9001440 x 90...

Page 22 - Installing the Wall mount plate

A21 Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate orthe interchange device. 1. Put a cushion or soft cloth on aflatsurface. 2. Place the monitor face Down onthe cushion or soft cloth. 3. Hold the Head Part with one hand andhold the Stand Base Part ...

Page 23 - Kensington Security Slot; Install the Wall mount plate.

A22 Installing the Wall mount plate Wall mount plate(Separate purchase) This is stand-type or wall mount type and isconnectable with Wall mount plate.Please refer to the installation guide for moredetails, which is provided when Wall mountplate is purchased. Kensington Security Slot Connected to a l...

Page 24 - Digitally yours