LG W1943SS-PF - Manuals

LG W1943SS-PF Monitor – User Manual in PDF format online.

Manuals:

User Manual

User Manual LG W1943SS-PF

Summary

Page 2 - On Safety; Do not Open the Display:; Important Precautions

1 This unit has been engineered and manufactured to ensure your personal safety,however improper use may result in potential electrical shock or fire hazards. Inorder to allow the proper operation of all safeguards incorporated in this display,observe the following basic rules for its installation, ...

Page 3 - On Installation; Avoid high temperatures and humidity.

2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not placethe display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchensink, laundry tub, in a wet basement, or near a s...

Page 4 - On Cleaning; screen because over-spraying may cause electrical shock.; On Repacking; your local authority.

Important Precautions 3 On Cleaning Unplug the display before cleaning the face of the display screen.Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub...

Page 5 - Accessories; IMPORTANT

4 Accessories !!! Thank for selecting LGE products !!! Please make sure the following items are included with yourmonitor. If any items are missing, contact your dealer. IMPORTANT This accessories may look different from those shown here.User must use shielded signal interface cables (D-sub 15 pin c...

Page 6 - Connecting the Display; Connecting and Disassembling the stand; Place the monitor face down on the soft cloth.; Once assembled, lift the monitor up carefully.

5 Connecting the Display Before setting up the monitor, ensure that the power to the monitor,the computer system, and other attached devices are turned off. Connecting and Disassembling the stand 1. Place the monitor face down on the soft cloth. 2. Assemble the Stand Base into the Stand Body in the ...

Page 7 - Pull out the Stand Base to remove.

6 Connecting the Display IMPORTANT This picture depicts the general model of connection. Your monitor may differ from the itemsshown in the picture.Do not carry the product upside down holding only the stand base. The product may fall andget damaged or cause injury. 5. Turn the Stand Base Lock throu...

Page 8 - Positioning your display; ERGONOMIC

7 Connecting the Display Before setting up the monitor, ensure that the power to the monitor,the computer system, and other attached devices is turned off. Positioning your display -After installation, adjust the angle as shown below. 1. Adjust the position of the panel in various ways for maximum c...

Page 9 - Connecting with the PC; NOTE; is executed automatically.

8 Connecting the Display W1943TS/W2043TE/W2243TE NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjuststhe display to optimal settings for individual input signals. ...

Page 11 - Control Panel Functions; Front Panel Controls; Button; Use this button to enter; PHOTO EFFECT; MENU Button; Use this button to enter or exit the On Screen Display.; The message; MENU button; for several seconds. The message

10 Control Panel Functions Front Panel Controls Button Use this button to enter 4:3 IN WIDE , PHOTO EFFECT menus.For more information, refer to page 14. MENU Button Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current controlsetting...

Page 12 - AUTO IMAGE ADJUSTMENT; button before entering the On Screen; Buttons; Use this button to turn the display on or off.

11 Control Panel Functions Use this button to enter a selection in the On Screen Display. AUTO/SETButton AUTO IMAGE ADJUSTMENT When adjusting your display settings, always pressthe AUTO/SET button before entering the On Screen Display(OSD). (Only Analog Mode) This will automatically adjust your disp...

Page 13 - On Screen Display (OSD) Control Adjustment; Screen Adjustment

12 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operatingparameters of the display is quick and easy with the On ScreenDisplay Control system. A short example is given below to familiarize you with the use of thecontrols. The followi...

Page 14 - On Screen Display(OSD) Selection and Adjustment; Main menu; SETUP; To adjust the screen color mode

13 NOTE The order of icons may differ depending on the model (13~19). On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment,and setting menus. Main menu Sub-menu Description MOVIE INTERNET USER NORMAL DEMO To select or customize d...

Page 16 - Main menu Sub menu; For moving images in videos or movies.

15 On Screen Display(OSD) Selection and Adjustment Icons Menu Name Sub-menu Name Main menu Sub menu Description To adjust the USER sub-menu function, press the AUTO/SET Button MOVIE INTERNET NORMAL DEMO USER When the F-ENGINE is executed, the screen is splitto show the effects of the selected functi...

Page 17 - Menu Name; Press the; Button, then the main; Main Menu

16 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptions of the all items shown on the Menu. Sub-menus NOTE OSD (On Screen Display) menu languages on th...

Page 18 - PICTURE; To adjust the brightness of the screen.; COLOR

17 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PICTURE MENU : Exit : Decrease : Increase SET : Select another sub-menu BRIGHTNESS CONTRAST GAMMA To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50 / 0 / 50On...

Page 19 - TRACKING; To adjust the clearness of the screen.

18 On Screen Display(OSD) Selection and Adjustment TRACKING Main menu Sub menu Description MENU : Exit : Decrease : Increase SET : Select another sub-menu CLOCK PHASE SHARPNESS To minimize any vertical bars orstripes visible on the screenbackground.The horizontal screen size will alsochange. To adju...

Page 21 - Troubleshooting; Check the following before calling for service.; No image appears

20 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a "OSD LOCKED" message on the screen? ● Is the power cord of the display connected? ● Is the power indicator light on? ● Is the power on and the power indicator red? ● Is the power...

Page 22 - Display image is incorrect

21 Troubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, verticalbars or stripes arevisible. ● Any horizontal noise appearing in anyimage or charactersare not clearlyportrayed. • Press the AUTO/SET button to automatically adjust your display image to...

Page 23 - The screen color is

22 Troubleshooting Display image is incorrect ● The screen color is mono or abnormal. ● The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than ...

Page 24 - Specifications; Operating Conditions

23 Specifications W1943TS 18.51 inches (47.01 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 47.01 cm0.30 x 0.30 mm (Pixel pitch) Display Horizontal Freq. 30 - 61 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate Sync.SOG (Sync On Green), Digi...

Page 30 - MAC

29 Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 12345678 *9 720 x 400640 x 480640 x 480800 x 600800 x 600832 x 624 1024 x 7681024 x 7681360 x 768 31.46831.46937.50037.87946.87549.72548.36360.12347.712 706075607575607560 VGAVGA VESA VE...

Page 31 - Indicator; LED Color

30 Specifications Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 123456789 1011 *12 720 x 400640 x 480640 x 480800 x 600800 x 600 1024 x 7681024 x 7681152 x 864 1280 x 10241280 x 10241680 x 10501920 x 1080 31.46831.46937.50037.87946.87548.36360.12367.50063.98179.97665.29067.50...

Page 32 - Installing the Wall mount plate

31 Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plateor the interchange device. 1. Place the monitor face down on the soft cloth. 2. Turn the Stand Base Lock through 90˚ to separate the Stand Base from the StandBody. <Unlocked> 3. Pull out the Sta...

Page 33 - Install the Wall mount plate.

32 Installing the Wall mount plate 4 . Install the Wall mount plate. Wall mount plate(Separate purchase) This is stand-type or wall mount type and isconnectable with Wall mount plate.Please refer to the installation guide for more details,which is provided when Wall mount plate ispurchased. LG recom...

Page 34 - MODEL

As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. E N E RGY STA R i s a s et o f p owe r- s a v i n g guidelines issued by the U.S. Environmental Protection Agency(EPA). Make sure to read the Important Precautions bef...