LG L2000CE-BF - Manuals

LG L2000CE-BF Monitor – User Manual in PDF format online.

Manuals:

User Manual

User Manual LG L2000CE-BF

Summary

Page 2 - On Safety; Do not Open the Display.; Important Precautions

A1 This unit has been engineered and manufactured to ensure your personalsafety, however improper use may result in potential electrical shock or firehazards. In order to allow the proper operation of all safeguardsincorporated in this display, observe the following basic rules for itsinstallation, ...

Page 3 - On Installation; screen because over-spraying may cause electrical shock.; On Repacking

A2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not placethe display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchensink, laundry tub, in a wet basement, or near a ...

Page 4 - Connecting the Display; Connecting the stand base or Removing the stand base; Insert the hooks into slots.; Important; Once you connect the stand base, try not to disconnect it.; Screw

Connecting the Display A3 100 Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off. Connecting the stand base or Removing the stand base 1 . Place the monitor with its front facing downward on a cushion or soft cloth. 2 . A...

Page 5 - Positioning your display; Ergonomic; You can rotate the panel 90

A4 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5˚~25˚ Swivel :350 ˚ Ergonomic ...

Page 6 - Using the Computer; height of your monitor, unlock the stand lock on top of the stand.; Power Cord; Signal Cable; Press button on the front switch panel to turn the power; NOTE

A5 Connecting the Display Using the Computer 1. Place the monitor in a convenient, well-ventilated location near your computer. To adjust height of your monitor, unlock the stand lock on top of the stand. 2. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 3...

Page 7 - Control Panel Functions; Front Panel Controls; MENU Button; Use this button to enter or exit the On Screen Display.; Control; The message; MENU button; for several seconds. The message; Buttons

A6 Control Panel Functions Front Panel Controls MENU Button Use this button to enter or exit the On Screen Display. Control Function OSD LOCKED/UNLOCKED This function allows you to lock the current controlsettings, so that they cannot be inadvertently changed.Press and hold the MENU button for sever...

Page 8 - Use this button to turn the display on or off.; Power Button; button before entering the On Screen

A7 Control Panel Functions This Indicator lights up blue when the displayoperates normally(On Mode). If the display is in SleepMode (Energy Saving), this indicator color changes to amber. Use this button to turn the display on or off. Power Button Power Indicator Use this button to enter a selection...

Page 9 - On Screen Display (OSD) Control Adjustment; Screen Adjustment

A8 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters ofthe display is quick and easy with the On Screen Display Control system. Ashort example is given below to familiarize you with the use of the controls.The followi...

Page 10 - On Screen Display(OSD) Selection and Adjustment; PICTURE; POSITION VERTICAL; FLATRON

A9 NOTE The order of icons may differ depending on the model (A9~A13). On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment,and setting menus. To adjust the brightness,contrast and gamma of thescreen PICTURE COLOR POSITION TRACKI...

Page 11 - Press the MENU Button, then the main menu of the OSD appears.; P I C T U R E

A10 On Screen Display(OSD) Selection and Adjustment NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptions of the ...

Page 12 - Main menu

A11 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description BRIGHTNESS CONTRAST GAMMA To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50/0/50On the monitor, high gamma valuesdisplay whitish images and low gammavalues d...

Page 13 - TRACKING

A12 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description CLOCK PHASE To minimize any vertical bars or stripesvisible on the screen background.Thehorizontal screen size will also change. To adjust the focus of the display. Thisitem allows you to remove anyhorizontal noise an...

Page 15 - Troubleshooting; Check the following before calling for service.; No image appears; Press the Power button.; MENU; button for; “OSD UNLOCKED”

A14 Troubleshooting No image appears Check the following before calling for service. No image appears Is the power cord of thedisplay connected? Is the power indicatorlight on? Is the power on and thepower indicator blue orgreen? Is the power indicatoramber? Do you see an "OUTOF RANGE" messa...

Page 16 - Display image is incorrect; H position and V position

A15 Troubleshooting Display image is incorrect Display Position isincorrect. On the screenbackground, verticalbars or stripes arevisible. Any horizontal noiseappearing in anyimage or charactersare not clearlyportrayed. The screen color ismono or abnormal. The screen blinks. Press the AUTO/SET button...

Page 17 - Have you installed the display driver?

A16 Troubleshooting Have you installed the display driver? Have you installed thedisplay driver? Do you see an"Unrecognized monitor,Plug&Play (VESA DDC)monitor found"message? Be sure to install the display driver from thedisplay driver CD (or diskette) that comes withyour display. Or, yo...

Page 18 - Specifications; With Stand; Display

A17 Specifications L2000C /L2000CN 20.1 inches (51.0cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating20.1 inches viewable0.255mm pixel pitch Horizontal Freq. Analog : 28 - 83kHz (Automatic)Digital : 28 - 83kHz (Automatic) Vertical Freq. 56 - 75Hz (Automatic) Input Form Separate TTL, Positive/N...

Page 20 - Stand Base; Information in this document is subject to change without notice.

A19 Specifications Attached( ), Detached ( O ) Attached( O ), Detached ( ) Wall-outlet type or PC-outlet type Stand Base Signal cable Power cord NOTE Information in this document is subject to change without notice.

Page 22 - Signal Connector Pin Assignment; DDC Clock; Indicator; LED Color

A21 Signal Connector Pin Assignment 1 8 9 17 24 16 Pin Signal(DVI-D) 123456789 101112131415 T. M. D. S. Data2- T. M. D. S. Data2+ T. M. D. S. Data2/4 Shield T. M. D. S. Data4- T. M. D. S. Data4+ DDC Clock DDC Data Analog Vertical Sync. T. M. D. S. Data1- T. M. D. S. Data1+ T. M. D. S. Data1/3 Shield...

Page 23 - How to Install the VESA Standard wall mounting; VESA wall mounting

A22 How to Install the VESA Standard wall mounting VESA wall mounting Connected to another object (stand type and wall-mounted type. This monitor accepts a VESA-compliant mounting interface pad.- This has to be purchased separately if required ) For further information, refer to the VESA WallMountin...

Page 24 - Digitally yours