LG L1919S-SF - Manuals

LG L1919S-SF Monitor – User Manual in PDF format online.

Manuals:

User Manual

User Manual LG L1919S-SF

Summary

Page 2 - On Safety; Do not Open the Display:; Important Precautions

A1 This unit has been engineered and manufactured to ensure your personalsafety, however improper use may result in potential eletrical shock or firehazards. In order to allow the proper operation of all safeguardsincorporated in this display, observe the following basic rules for itsinstallation, u...

Page 3 - On Installation; screen because over-spraying may cause electrical shock.; On Repacking

A2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not placethe display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchensink, laundry tub, in a wet basement, or near a ...

Page 4 - Connecting the Display; Important; Connecting the stand; Place the monitor with its front facing downward on a soft cloth.

Connecting the Display A3 Important This illustration depicts the general model of connection. Your monitor may differ fromthe items shown in the picture.Do not carry the product upside down holding only the stand base. The product mayfall and get damaged or injure your foot. Before setting up the m...

Page 5 - Put a cushion or soft cloth on a flat surface.; To remove the Stand:; Place the monitor face down on

A4 Connecting the Display 1. Put a cushion or soft cloth on a flat surface. To remove the Stand: 2. Place the monitor face down on the cushion or soft cloth. 3. Hold the product as it follows and lift up the Stand slightly. 4. Change your hold on the product as it follows and turn the Stand Base in ...

Page 6 - To remove the Stand Base:; Hold the body of the Stand as it follows.

Connecting the Display A5 To remove the Stand Base: 2. Hold the body of the Stand as it follows. Type. A 3. Press the four latches individuallytoward each end as shown. 5. The body of the Stand and the Stand Base are successfully separated. 4. Pull up the body of the Stand while holding the Stand Ba...

Page 8 - Positioning your display; Ergonomic

A7 Connecting the Display 20 Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5˚~20˚ Ergonomic It is recom...

Page 9 - Using the Computer; Power Cord Signal Cable; Press button on the side switch panel to turn the power on.; NOTE

A8 2 1 Connecting the Display Using the Computer 1. Place the monitor in a convenient, well-ventilated location near your computer. 2. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 3. Connect the power cord into a proper power outlet that is easily access...

Page 10 - Control Panel Functions; MENU Button; Use this button to enter or exit the On Screen Display.; Control; The message; MENU button; for several seconds. The message; Buttons; Front Panel Controls

A9 Control Panel Functions MENU Button Use this button to enter or exit the On Screen Display. Control Function OSD LOCKED/UNLOCKED This function allows you to lock the current controlsettings, so that they cannot be inadvertently changed.Press and hold the MENU button for several seconds. The messa...

Page 11 - Use this button to turn the display on or off.; Power Button; button before entering the On Screen

A10 Control Panel Functions This Indicator lights up green or blue when the displayoperates normally(On Mode). If the display is in SleepMode (Energy Saving), this indicator color changes to amber. Use this button to turn the display on or off. Power Button Power Indicator Use this button to enter a...

Page 12 - On Screen Display (OSD) Control Adjustment; Screen Adjustment

A11 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters ofthe display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls.The follo...

Page 13 - On Screen Display(OSD) Selection and Adjustment; PICTURE; POSITION

A12 NOTE The order of icons may differ depending on the model (A12~A16). On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment,and setting menus. PICTURE COLOR POSITION TRACKING SETUP Main menu Sub menu Reference PRESET 6500K 9300...

Page 14 - Press the MENU Button, then the main menu of the OSD appears.; P I C T U R E

A13 On Screen Display(OSD) Selection and Adjustment NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptions of the ...

Page 15 - Main menu

A14 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description BRIGHTNESS CONTRAST GAMMA To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50/0/50On the monitor, high gamma valuesdisplay whitish images and low gammavalues d...

Page 16 - TRACKING

A15 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description CLOCK PHASE SHARPNESS To minimize any vertical bars or stripesvisible on the screen background.The horizontal screen size will alsochange. To adjust the focus of the display. This item allows you to remove anyhorizont...

Page 18 - Troubleshooting; Check the following before calling for service.; No image appears

A17 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a "OSD LOCKED" message on the screen? ● Is the power cord of the display connected? ● Is the power indicator light on? ● Is the power on and the power indicator blue orgreen? ● Is...

Page 19 - Display image is incorrect

A18 Troubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, verticalbars or stripes arevisible. ● Any horizontal noise appearing in anyimage or charactersare not clearlyportrayed. ● The screen color is mono or abnormal. ● The screen blinks. • Press the...

Page 20 - Have you installed the display driver?; Have you installed the; • Be sure to install the display driver from the display

A19 Troubleshooting Have you installed the display driver? ● Have you installed the display driver? ● Do you see an "Unrecognized monitor,Plug&Play (VESA DDC)monitor found"message? • Be sure to install the display driver from the display driver CD (or diskette) that comes with yourdispla...

Page 21 - Specifications; Information in this document is subject to change without notice.

A20 Specifications 17 inch Display Sync Input Video Input Resolution Plug&Play PowerConsumption Dimensions & Weight Tilt Range Power Input Environmental Conditions Stand Base Signal cable Power cord NOTE Information in this document is subject to change without notice. 17 inches (43.2 cm) Fl...

Page 23 - Indicator; LED Color

A22 Specifications Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 123456789 1011 *12 13 640 x 350720 x 400640 x 480640 x 480800 x 600800 x 600832 x 624 1024 x 7681024 x 7681152 x 8701152 x 900 1280 x 10241280 x 1024 31.46931.46831.46937.50037.87946.87549.72548.36360.02368.6816...

Page 24 - Installing the Wall mount plate

A23 Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate orthe interchange device. 1. Put a cushion or soft cloth on a flat surface. 2. Place the monitor face down on the cushion or soft cloth. 3. Hold the product as it follows and lift up the Stand sligh...

Page 25 - Kensington Security Slot; Installing the wall mount plate

A24 Installing the Wall mount plate Wall mount plate(Separate purchase) This is stnad-type or will mount type and isconnectable with Wall mount plate.Please refer to the installation guide for moredetails, which is provided when Wall mount plate ispurchased. Kensington Security Slot Connected to a l...

Page 26 - Digitally yours