LG L1740B - Manuals

LG L1740B Monitor – User Manual, Manual in PDF format online.

Manuals:

User Manual
Manual

Manual LG L1740B

Summary

Page 2 - On Safety; Do not Open the Display.; Important Precautions

A1 This unit has been engineered and manufactured to ensure your personalsafety, however improper use may result in potential eletrical shock or firehazards. In order to allow the proper operation of all safeguardsincorporated in this display, observe the following basic rules for itsinstallation, u...

Page 3 - On Installation; screen because over-spraying may cause electrical shock.; On Repacking

A2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not placethe display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchensink, laundry tub, in a wet basement, or near a ...

Page 4 - Connecting the Display; Using the Computer; When successfully connected,; Unfolding the stand base

Connecting the Display A3 Using the Computer 4. When successfully connected, fit the back cap in along the groove. 3. Connect the signal input cable and the power cord. Before setting up the monitor, ensure that the power to the monitor, thecomputer system, and other attached devices is turned off. ...

Page 5 - close to the display.; Touch button on the front switch panel to turn the; Image Setting Function'; is executed automatically.

A4 Connecting the Display Using the Computer 1. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 2. Connect the power cord into a proper power outlet that is easily accessible and close to the display. PC MAC Wall-outlet type PC-outlet type Power Cord Analog...

Page 6 - NOTE; Touch button for several seconds on the front switch panel to turn

Connecting the Display A5 NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display tooptimal settings for individual input signals. If you want to adjust t...

Page 7 - Control Panel Functions; Front Panel Controls; MENU Button; Use this button to enter or exit the On Screen Display.; Control; message; MENU button; for 5 seconds. The message

A6 A6 Control Panel Functions Front Panel Controls MENU Button Use this button to enter or exit the On Screen Display. Control Function OSD LOCKED/UNLOCKED This function allows you to lock the current controlsettings, so that they cannot be inadvertently changed.Press and hold the MENU button for 5 ...

Page 8 - AUTO IMAGE ADJUSTMENT; button before entering the On Screen; Buttons; For more information, refer to page A13; Power Button

A7 Control Panel Functions Use this button to enter a selection in the On Screen Display. SET/AUTOButton AUTO IMAGE ADJUSTMENT When adjusting your display settings, always pressthe SET/AUTO button before entering the On Screen Display(OSD). This will automatically adjust yourdisplay image to the ide...

Page 9 - On Screen Display (OSD) Control Adjustment; Screen Adjustment; MENU

A8 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters ofthe display is quick and easy with the On Screen Display Control system. Ashort example is given below to familiarize you with the use of the controls.The followi...

Page 10 - On Screen Display(OSD) Selection and Adjustment; PICTURE; POSITION VERTICAL; FLATRON

A9 NOTE The order of icons may differ depending on the model (A9~A13). On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment,and setting menus. To adjust the brightness,contrast and gamma of thescreen PICTURE COLOR POSITION TRACKI...

Page 11 - Press the MENU Button, then the main menu of the OSD appears.; P I C T U R E

A10 On Screen Display(OSD) Selection and Adjustment NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptions of the ...

Page 12 - Main menu

A11 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description BRIGHTNESS CONTRAST GAMMA To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50/0/50On the monitor, high gamma valuesdisplay whitish images and low gammavalues d...

Page 13 - TRACKING

A12 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description CLOCK PHASE To minimize any vertical bars or stripesvisible on the screen background.Thehorizontal screen size will also change. To adjust the focus of the display. Thisitem allows you to remove anyhorizontal noise an...

Page 15 - Troubleshooting; Check the following before calling for service.; No image appears; Touch the Power button.; button for; “OSD UNLOCKED”

A14 Troubleshooting No image appears Check the following before calling for service. No image appears Is the power cord of thedisplay connected? Is the power indicatorlight on? Is the power on and thepower indicator blue? Is the power indicatoramber? Do you see an "OUTOF RANGE" messageon the...

Page 16 - Display image is incorrect; H position and V position

A15 Troubleshooting Display image is incorrect Display Position isincorrect. On the screenbackground, verticalbars or stripes arevisible. Any horizontal noiseappearing in anyimage or charactersare not clearlyportrayed. The screen color ismono or abnormal. The screen blinks. Press the SET/AUTO button...

Page 17 - Have you installed the display driver?

A16 Troubleshooting Have you installed the display driver? Have you installed thedisplay driver? Do you see an"Unrecognized monitor,Plug&Play (VESA DDC)monitor found"message? Be sure to install the display driver from thedisplay driver CD (or diskette) that comes withyour display. Or, yo...

Page 18 - Specifications L1740B; 5 pin D-Sub Connector; Information in this document is subject to change without notice.

A17 Specifications L1740B 17 inches (43.2cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating17 inches viewable0.264 mm pixel pitch Horizontal Freq. Analog : 30 - 83kHz (Automatic) Vertical Freq. 56 - 75Hz (Automatic) Input Form Separate TTL, Positive/NegativeSOG (Sync On Green) Signal Input 15 p...

Page 19 - Specifications L1940B

A18 Specifications L1940B 19 inches (48.18cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating19 inches viewable0.294 mm pixel pitch Horizontal Freq. Analog : 30 - 83kHz (Automatic) Vertical Freq. 56 - 75Hz (Automatic) Input Form Separate TTL, Positive/NegativeSOG (Sync On Green) Signal Input 15 ...

Page 20 - Specifications; Indicator; Mode

A19 Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8 9 10 11 12 13 640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1152 x 870 1152 x 900 1280 x 1024 1280 x 1024 31.469 31.468 31....

Page 21 - How to Install the Rack wall mounting; Install the VESA standrad wall mounting.; Kensington Security Slot

A20 How to Install the Rack wall mounting This monitor can be mounted on the VESA standrad wall mounting rack. . 1. Please the monitor on a piece of cloth or other soft surface with thefront side facing downward and remove the rear cap. 2. Separate the stand base using ascrewdriver as shown in the p...

Page 22 - Digitally yours