LG 75QNED85TUA - Manuals

LG 75QNED85TUA TV – User Manual in PDF format online.

Manuals:

User Manual

User Manual LG 75QNED85TUA

Summary

Page 2 - Optional Extras

2 Important Safety Instruction • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instruction...

Page 3 - Warning! Safety instructions

3 Warning! Safety instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The symbol is intended to alert the user to the presence of uninsulated dange...

Page 4 - Installation; Lifting and moving the TV

4 • If any of the following occur, unplug the product immediately and contact your local customer service. - The product has been damaged. - If water or another substance enters the product (like an AC adapter, power cord, or TV). - If you smell smoke or other odors coming from the TV - When lightni...

Page 5 - Securing TV to the Wall; Mounting to the Wall

5 • Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.) • Do not use any unapproved items to ensure the safety and lifespan of the product. • Any damages or injuries by using unapproved items are not covered by t...

Page 6 - Starting TV; Turning on the TV; Connections; HDMI

6 Starting TV Turning on the TV You can simply operate the TV functions, using the button. Power On (Press)Power Off 1) (Press and Hold) Menu Control (Press 2) ) Menu Selection (Press and Hold 3) ) 1) All running apps will close.2) You can access and adjust the menu by pressing the button when TV is...

Page 7 - USB; IR Blaster; External Devices

7 USB Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it directly to the USB port on the TV. (Depending upon model) Note • For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inc...

Page 8 - Specifications

8 Specifications Product specifications may be changed without prior notice due to upgrade of product functions.Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only).The actual energy consumption depends on th...

Page 9 - Product Information

9 Product Information (Only QNED99*, QNED90TA*, QNED85TA*) Wireless module(LGSBWAX12)Specifications Wireless LAN (IEEE 802.11a/b/g/n/ac/ax) Frequency range Output Power (Max.) 2,400 to 2,472 MHz 17 dBm 5,150 to 5,725 MHz 15 dBm 5,725 to 5,850 MHz 15 dBm 5,945 to 7,125 MHz 11 dBm Bluetooth Frequency ...

Page 10 - Open Source Software Notice

10 (Only 70/75/86UT80*, 75/86UT75*) Wireless module(LGSBWAC03)Specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency range Output Power (Max.) 2,400 to 2,483.5 MHz 20 dBm 5,150 to 5,725 MHz 18.5 dBm 5,725 to 5,850 MHz 18 dBm Bluetooth Frequency range Output Power (Max.) 2,400 to 2,483.5 MHz 9...

Page 11 - Troubleshooting

11 Troubleshooting In TV / HDMI input, press the button on the remote control three times to display the model name and serial number on the screen. Cannot control the TV with the remote control. • Check if anything such as tape has been placed over the receiver. • Check if there is any obstacle bet...

Page 12 - Regulatory

Page 13 - NOTE TO CABLE/TV INSTALLER; Symbols

13 (1) (2) (3) (4) NOTE TO CABLE/TV INSTALLER (For USA and Canada)This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground sh...

Page 17 - OWNER’S MANUAL; EXTERNAL CONTROL

OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com P/NO : MFL71445401 (1901-REV00)

Page 18 - KEY CODES

2 ENG ENGLISH 2 KEY CODES KEY CODES • This feature is not available for all models. Code (Hexa) Function Note Code (Hexa) Function Note 00 CH +, PR + R/C Button 53 List R/C Button 01 CH -, PR - R/C Button 5B Exit R/C Button 02 Volume + R/C Button 60 PIP(AD) R/C Button 03 Volume - R/C Button 61 Blue ...

Page 19 - EXTERNAL CONTROL DEVICE SETUP; USB IN

3 ENG ENGLISH 3 EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP • Image shown may differ from your TV. Connect the USB to Serial(RS-232C) converter/RS-232C(Serial) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions ex...

Page 20 - Customer Computer

4 ENG ENGLISH 4 EXTERNAL CONTROL DEVICE SETUP Phone jack Type • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port.* The connection interface may differ from your TV....

Page 21 - Communication Parameters; Command reference list

5 ENG ENGLISH 5 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexade...

Page 22 - Transmission / Receiving Protocol; Transmission; OK Acknowledgement; Error Acknowledgement; Real data mapping (Hexadecimal

6 ENG ENGLISH 6 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose des...