Page 2 - RISK; TO REDUCE THE RISK OF ELECTRIC SHOCK; To prevent fire or shock hazards, do not expose this; FCC NOTICE; Class B digital device; CAUTION
2 WARNING / CAUTION WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an e...
Page 3 - SAFETY INSTRUCTIONS; IMPORTANT SAFETY INSTRUCTIONS
3 6 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Antenna Lead in Wire Antenna Discharge Unit (NEC Section 810-20) Grounding Conductor (NEC Section 810-21) Ground Clamps Power Service Grounding...
Page 4 - GROUNDING; DISCONNECTING DEVICE FROM MAINS
4 16 As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH. 17 Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on ...
Page 5 - ON DISPOSAL
5 22 ANTENNAS Outdoor antenna grounding If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circui...
Page 6 - CONTENTS
6 CONTENTS WATCHING TV / CHANNEL CONTROL Remote Control Functions . . . . . . . . . . . . . . . . 50Turning On The TV . . . . . . . . . . . . . . . . . . . . . . 52Channel Selection. . . . . . . . . . . . . . . . . . . . . . . . 53Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . 53On-Sc...
Page 7 - Clock Setting; PARENTAL CONTROL / RATINGS
7 PICTURE CONTROL PIP (Picture-In-Picture) . . . . . . . . . . . . . . . . . . . 71Picture Size (Aspect Ratio) Control . . . . . . . . . 73Preset Picture Settings (Picture Mode) . . . . . . 75Manual Picture Adjustment - User Mode . . . . 76Picture Improvement Technology . . . . . . . . . . 77Picture...
Page 8 - FEATURES OF THIS TV
8 FEATURES OF THIS TV WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN IMPORTANT INFORMATION TO PREVENT“IMAGE BURN / BURN-IN” ON YOUR TV SCREEN V When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed on the TV for an extended period, it can become permanently imprint...
Page 9 - PREPARATION; Not included with all models.; Optional Extras; ACCESSORIES
PR EP A RA TIO N 9 For 32/37/42LG710H PREPARATION Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.The accessories included may differ from the images below. Not included with all models. MUTE RETURN CC ...
Page 12 - Illuminates red in standby mode.; Adjusts picture according; FRONT PANEL INFORMATION; Image shown may differ from your TV.
PR EP A RA TIO N 12 PREPARATION CH VOL MENU INPUT ENTER CH VOL MENU INPUT ENTER POWER Button Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the set is switched on. CH VOL MENU INPUT ENTER VOLUME (+, -)Buttons ENTER Button MENU Button INPUT Button Remote Control Sensor...
Page 13 - Adjusts picture according to
PR EP A RA TIO N 13 32/37/42/47/55LD650H, 32/37/42LD655H, 32/37/42LD660H, 32/37/42LD665H CH VOL ENTER INPUT MENU VOLUME (+, -) Buttons ENTER Button MENU Button INPUT Button POWER Button CHANNEL( ὤ㨴㥄 , ὤ㨴㥄 ) Buttons CH VOL ENTER INPUT MENU Intelligent Sensor Adjusts picture according to the surroundi...
Page 14 - Intelligent Sensor; Buttons
PR EP A RA TIO N 14 PREPARATION Intelligent Sensor Adjusts picture according to the surrounding conditions. Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the set is switched on. Remote Control Sensor ENTER CH VOL HOME H INPUT ENTER CH VOL HOME H INPUT ENTER CH VOL HO...
Page 15 - AV IN 2; MO; MO; BACK PANEL INFORMATION
PR EP A RA TIO N 15 ANTENNA IN M.P.I. AV IN 2 L/ MO NO R AUDIO VIDEO USB IN REMOTE CONTROL OUT OPTICAL DIGITAL AUDIO OUT AV IN 1 AUDIO VIDEO MONO / UPDATE RESET LAN (SERVICE ONLY) COMPONENT IN VIDEO AUDIO HDMI/DVI IN 2 1(DVI) RJP INTERFACE SPEAKER OUT 8 RGB(PC) AUDIO (RGB/DVI) R G B IN RS-232C IN (S...
Page 19 - STAND INSTRUCTIONS; INSTALLATION; or; Tighten the two of these four screws and; NOTE; DETACHMENT; PROTECTION COVER
PR EP A RA TIO N 19 STAND INSTRUCTIONS INSTALLATION 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. ὤ㨴㥄 wyv{lj{pvuGjv}ly 2 Assemble the parts of the STAND BODY with the STAND BASE of the TV. ὤ㨴㥄 wyv{l...
Page 21 - STAND BODY
PR EP A RA TIO N 21 INSTALLATION 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. ὤ㨴㥄 wyv{lj{pvuGjv}ly AC IN CABLE MANAGEMEN T AC IN CABLE MANAGEMENT AC IN CABLE MANAGEMENT AC IN CABLE MANAGEMENT AC IN CABLE MANAGEMENT 2 Asse...
Page 23 - CABLE MANAGEMENT
PR EP A RA TIO N 23 CABLE MANAGEMENT 1 Connect the cables as necessary.To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. To help prevent the power cable from being removed by accident, secure the power cable with the included PROTECTIVE BRACKET/ SCREW. The 32LG710H use a PLU...
Page 25 - Gether and bind the cables with the; CABLE; on the TV back cover.
PR EP A RA TIO N 25 1 Gether and bind the cables with the CABLE HOLDER on the TV back cover. ὤ㨴㥄 32/37/42/47/55LV555H
Page 26 - inches; Do not mount near or above any type of heat source.; DESKTOP PEDESTAL INSTALLATION
PR EP A RA TIO N 26 PREPARATION For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. After installing the TV, you can adjust the TV set manually to the left or right direction to suit your viewing position. 4 inches 4 inches 4 inches 4 inches CAUTION G Ensure adequa...
Page 27 - ATTACHING THE TV TO A DESK
PR EP A RA TIO N 27 ὤ㨴㥄 32/37/42LG710H 32/37/42LD650H, 32/37/42LD655H 47/55LD650H Except 47/55LD650H ὤ㨴㥄 4-Screws (not provided as parts of the product) ὤ㨴㥄 32/37/42LG710H 32/37/42LD650H, 32/37/42LD655H 47/55LD650H Except 47/55LD650H ὤ㨴㥄 Desk Stand ὤ㨴㥄 32/37/42LG710H 32/37/42LD650H, 32/37/42LD655H 4...
Page 28 - Stand
PR EP A RA TIO N 28 PREPARATION 4-Screws (not provided as parts of the product) ὤ㨴㥄 32/37/42LG710H 32/37/42LD650H, 32/37/42LD655H 47/55LD650H Except 47/55LD650H ὤ㨴㥄 Stand Desk ὤ㨴㥄 32/37/42LG710H 32/37/42LD650H, 32/37/42LD655H 47/55LD650H Except 47/55LD650H ὤ㨴㥄 1-Screw (provided as parts of the produ...
Page 29 - Model; Standard; VESA WALL MOUNTING
PR EP A RA TIO N 29 Model VESA (A * B) ὤ㨴㥄 y~YZW sz~XWWi sz~YWWi sz~[WWi h~T[^snZWt A A B B A A B B Standard Screw Quantity Wall Mounting Bracket (sold separately) 32LG710H 200 * 100 M4 4 ὤ㨴㥄 y~YZW sz~XWWi sz~YWWi sz~[WWi h~T[^snZWt A A B B A A B B ὤ㨴㥄 y~YZW sz~XWWi sz~YWWi sz~[WWi h~T[^snZWt A A B ...
Page 31 - potentially causing injury or damaging the product.; the wall and the product.; SECURING THE TV TO THE WALL TO PREVENT
PR EP A RA TIO N 31 We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sur...
Page 32 - This image refers to using a cable connection without a cable box.; Contact your cable company is a poor signal persists.; ANTENNA OR CABLE CONNECTION
PR EP A RA TIO N 32 PREPARATION 1. Antenna (Analog or Digital) This image refers to using a Wall Antenna Socket or Outdoor Antenna without a Cable Box Connection. 2. Cable This image refers to using a cable connection without a cable box. ὤ㨴㥄 WallAntennaSocket OutdoorAntenna(VHF, UHF) Multi-family D...
Page 33 - MPI Card Removal / PPV Card Installation; R F C a b l e; MPI CARD SLOT / PPV CARD INSTALLATION
PR EP A RA TIO N 33 (Except 47/55LD650H, 32/37/42/47/55LV555H) 1. Remove the two MPI card retainer screws.2. Pull out current MPI card far enough so that the RF cable can be detached from the old card.3. Detach RF cable.4. Place new PPV card into slot and slide it in far enough to reconnect RF cable...
Page 34 - EX; EXTERNAL EQUIPMENT SETUP; HD RECEIVER SETUP; COMPONENT IN VIDEO; Component Connection; Supported Resolutions
34 EXTERNAL EQUIPMENT SETUP EX TE RN A L E Q U IP M EN T S ET U P EXTERNAL EQUIPMENT SETUP HD RECEIVER SETUP V To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. V Image shown may differ from your TV. This TV can receive Digital Over-the-...
Page 35 - HDMI Connection; HDMI; Resolution
35 EX TE RN A L E Q U IP M EN T S ET U P HDMI Connection NOTE G If the HDMI cables don’t support High Speed HDMI, it can cause flickers or no screen display. In this case use the latest cables that support High Speed HDMI. G HDMI mode supports PCM, Dolby Digital audio format. ! ? ! ? ! ! 1. How to c...
Page 36 - DVI to HDMI Connection; INPUT
36 EXTERNAL EQUIPMENT SETUP EX TE RN A L E Q U IP M EN T S ET U P L R S-VIDEO VIDEO OUTPUT SWITCH L R S-VIDEO VIDEO OUTPUT SWITCH ὤ㨴㥄 REMOTE CONTROL OUT OPTICAL DIGITAL AUDIO OUT AV IN 1 AUDIO VIDEO MONO / UPDATE RESET LAN (SERVICE ONLY) COMPONENT IN VIDEO AUDIO HDMI/DVI IN 2 1(DVI) RJP INTERFACE SP...
Page 37 - Component Input ports; DVD SETUP
37 EX TE RN A L E Q U IP M EN T S ET U P Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. L R S-VIDEO VIDEO OUTPUT SWITCH L R S-VIDEO VIDEO OUTPUT SWITCH ὤ㨴㥄 REMOTE CONTROL OUT OPTICAL DIGITAL AUDIO OUT AV IN 1 AUDIO VIDEO MONO / ...
Page 39 - VCR SETUP; Antenna Connection; Connect the RF antenna out socket of the VCR to the; Connect the antenna cable to the RF antenna in
39 EX TE RN A L E Q U IP M EN T S ET U P L R S-VIDEO VIDEO OUTPUT SWITCH L R S-VIDEO VIDEO OUTPUT SWITCH ὤ㨴㥄 REMOTE CONTROL OUT OPTICAL DIGITAL AUDIO OUT AV IN 1 AUDIO VIDEO MONO / UPDATE RESET LAN (SERVICE ONLY) COMPONENT IN VIDEO AUDIO HDMI/DVI IN 2 1(DVI) RJP INTERFACE SPEAKER OUT 8 RGB(PC) AUDIO...
Page 41 - OTHER A/V SOURCE SETUP
41 EX TE RN A L E Q U IP M EN T S ET U P L R S-VIDEO VIDEO OUTPUT SWITCH L R S-VIDEO VIDEO OUTPUT SWITCH ὤ㨴㥄 REMOTE CONTROL OUT OPTICAL DIGITAL AUDIO OUT AV IN 1 AUDIO VIDEO MONO / UPDATE RESET LAN (SERVICE ONLY) COMPONENT IN VIDEO AUDIO HDMI/DVI IN 2 1(DVI) RJP INTERFACE SPEAKER OUT 8 RGB(PC) AUDIO...
Page 42 - AUDIO OUT CONNECTION; OPTICAL DIGITAL AUDIO OUT
42 EXTERNAL EQUIPMENT SETUP EX TE RN A L E Q U IP M EN T S ET U P Send the TV’s audio to external audio equipment via the Audio Output port. L R S-VIDEO VIDEO OUTPUT SWITCH L R S-VIDEO VIDEO OUTPUT SWITCH ὤ㨴㥄 REMOTE CONTROL OUT OPTICAL DIGITAL AUDIO OUT AV IN 1 AUDIO VIDEO MONO / UPDATE RESET LAN (S...
Page 43 - PC SETUP
43 EX TE RN A L E Q U IP M EN T S ET U P L R S-VIDEO VIDEO OUTPUT SWITCH L R S-VIDEO VIDEO OUTPUT SWITCH ὤ㨴㥄 REMOTE CONTROL OUT OPTICAL DIGITAL AUDIO OUT AV IN 1 AUDIO VIDEO MONO / UPDATE RESET LAN (SERVICE ONLY) COMPONENT IN VIDEO AUDIO HDMI/DVI IN 2 1(DVI) RJP INTERFACE SPEAKER OUT 8 RGB(PC) AUDIO...
Page 45 - Supported Display Specifications
45 EX TE RN A L E Q U IP M EN T S ET U P Supported Display Specifications NOTE G To get the best picture quality, adjust the PC graphics card to 1360x768 (32/37/42LG710H, 32LD650H, 32LD655H, 32LD660H, 32LD665H, 32LV555H) or 1920x1080 (37/42/47/55LD650H, 37/42LD655H, 37/42LD660H, 37/42LD665H, 37/42/4...
Page 46 - Screen Setup for PC mode; Selecting Resolution; PICTURE; Select; Select the desired resolution.; PICTURE; SCREEN
46 EXTERNAL EQUIPMENT SETUP EX TE RN A L E Q U IP M EN T S ET U P Screen Setup for PC mode Selecting Resolution When using RGB-PC input, change the resolution in the menus to match the PC’s.The Position, Phase, and Size can also be adjusted. 1 MENU or Home Select PICTURE . 2 ENTER Select Screen (RGB...
Page 47 - Auto Configure
47 EX TE RN A L E Q U IP M EN T S ET U P 1 MENU or Home Select PICTURE . 2 ENTER Select Screen (RGB-PC) . 3 ENTER Select Auto config . 4 ENTER Select Yes . 5 ENTER Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not corre...
Page 48 - Adjustment for screen Position, Size, and Phase
48 EXTERNAL EQUIPMENT SETUP EX TE RN A L E Q U IP M EN T S ET U P 1 MENU or Home Select PICTURE . 2 ENTER Select Screen (RGB-PC) . 3 ENTER Select Position , Size , or Phase . 4 ENTER Make appropriate adjustments. 5 ENTER Adjustment for screen Position, Size, and Phase If the picture is not clear aft...
Page 49 - Selectt; Screen Reset (Reset to original factory values); Returns
49 EX TE RN A L E Q U IP M EN T S ET U P 1 MENU or Home Select PICTURE . 2 ENTER Select Screen (RGB-PC) . 3 ENTER Select Reset . 4 ENTER Selectt Yes . 5 ENTER Screen Reset (Reset to original factory values) Returns Position , Size , and Phase to the default factory settings. This feature operates on...
Page 50 - TC; WATCHING TV / CHANNEL CONTROL; FLASHBK; REMOTE CONTROL FUNCTIONS; Tunes to the last channel or input viewed.; control buttons; Changes the aspect ratio.
50 WATCHING TV / CHANNEL CONTROL W A TC H IN G T V / C H A N N EL C O N TR O L WATCHING TV / CHANNEL CONTROL REFERENCE POINT MUTE RETURN CC TV POWER GUIDE PORTAL ENTER VOL CH 1 2 3 4 5 6 7 8 0 9 FLASHBK VCR DVD INPUT MENU INFO i STB P A G E PIP SAP PIP CH- PIP CH+ PIP SWAP PIP INPUT ALPHA/NUM REMOVE...
Page 51 - Displays the main menu.; Installing Batteries
51 W A TC H IN G T V / C H A N N EL C O N TR O L THUMBSTICK (Up/Down/Left Right/ENTER) Navigates the on-screen menus and adjusts the system settings to your preference. RETURN Clears all on-screen displays and returns to TV viewing from any menu. MENU Displays the main menu. INPUT Rotates through in...
Page 52 - TURNING ON THE TV; POWER
52 WATCHING TV / CHANNEL CONTROL W A TC H IN G T V / C H A N N EL C O N TR O L NOTE G If you intend to be away on vacation, disconnect the power plug from the wall power outlet. ! ? ! ? ! ! TURNING ON THE TV 1 First, connect the power cord correctly.At this moment, the TV switches to standby mode. V...
Page 53 - Adjust the volume to suit your personal preference.; CHANNEL SELECTION; NUMBER
53 W A TC H IN G T V / C H A N N EL C O N TR O L Adjust the volume to suit your personal preference. CHANNEL SELECTION VOLUME ADJUSTMENT 1 Press the CH( ὤ㨴㥄 or ὤ㨴㥄 ) or NUMBER buttons to select a channel number. 1 Press the VOL (+ or -) button to adjust the volume. 2 If you want to switch the sound ...
Page 54 - Accept the current selection.; Return to TV viewing.; Infinite Sound; ON-SCREEN MENUS SELECTION; For USA
54 WATCHING TV / CHANNEL CONTROL W A TC H IN G T V / C H A N N EL C O N TR O L 1 MENU or Home Display each menu. 2 ENTER Select a menu item. 3 ENTER Accept the current selection. 4 MENU or Home Return to TV viewing. Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual...
Page 55 - CHANNEL SETUP; Auto Tuning; CHANNEL; CHANNEL
55 W A TC H IN G T V / C H A N N EL C O N TR O L Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs and stores them in memory on the channel list.Run Auto Tuning again after any Antenna/Cable connection changes. CHANNEL SETUP 1 MENU or Home Select CHAN...
Page 57 - button during; Channel Edit; Channel Editing
57 W A TC H IN G T V / C H A N N EL C O N TR O L 1 MENU or Home Select CHANNEL . 2 ENTER Select Channel Edit . 3 ENTER Select a channel. 4 Select channel you want to add or delete. 5 RETURN Return to the previous menu. MENU or Home Return to TV viewing. The channels in the Channel Edit List are disp...
Page 58 - CHANNEL LABEL
58 WATCHING TV / CHANNEL CONTROL W A TC H IN G T V / C H A N N EL C O N TR O L Choose preset labels for your channels. If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a channel even if you didn't preset a label for the channel. CHANNEL LAB...
Page 59 - INPUT LIST; Select the desired input source.; TV; digital cable broadcasts.; Component; : Select them to watch DVD or a
59 W A TC H IN G T V / C H A N N EL C O N TR O L TV AV1 AV2 Component HDMI1 RGB-PC HDMI2 ὤ㨴㥄 ὤ㨴㥄 ὤ㨴㥄 ὤ㨴㥄 ὤ㨴㥄 ὤ㨴㥄 ὤ㨴㥄 INPUT LIST 1 INPUT ENTER Select the desired input source. V TV : Select it to watch over-the-air, cable and digital cable broadcasts. V AV1-2 : Select them to watch a VCR or other ext...
Page 60 - Kids Movies; Kids; EXAMPLE ELECTRONIC PROGRAM GUIDE; GUIDE; button to shows available TV programs.
60 WATCHING TV / CHANNEL CONTROL W A TC H IN G T V / C H A N N EL C O N TR O L This is an example of a typical TV electronic program guide showing available programming. On The Political Scene Kids Movies Top FashionsWorld Events Today Channel 01:30 AM 2:30 AM 2:45 AM 3:00 AM Kids ... Kids ... Kids ...
Page 61 - SB; PHOTO LIST; USB; ENTRY MODES
61 U SB 1 Connect the USB device to the USB IN jack on the side of TV. USB IN Memory Key or 2 Select PHOTO LIST , MUSIC LIST, or EXTRA CONTENTS . i Choose the media you want. Close Fl Photo List Music List Extra Contents 3 ENTER When you connect a USB device, this pop-up menu is displayed automatica...
Page 62 - When removing the USB device
62 USB U SB When removing the USB device 1 MENU or Home Select USB . 2 ENTER Select Eject . 3 ENTER 4 RETURN Return to the previous menu. MENU or Home Return to TV viewing. Enter Move USB Photo ListMusic ListExtra Contents Eject ὤ㨴㥄 Enter Move USB Photo ListMusic ListExtra Contents Eject i Now you c...
Page 63 - Precautions with USB devices.; Only a USB storage device is recognizable.
63 U SB Precautions with USB devices. G Only a USB storage device is recognizable. G If the USB storage device is connected through a USB hub, the device is not recognizable. G A USB storage device using an automatic recognition program may not be recognized. G A USB storage device which uses its ow...
Page 64 - Screen Components; Photo List
64 USB U SB This TV only supports picture in JPEG(.jpg) format.The On-Screen Display on your model may be slightly different. Screen Components PHOTO LIST 1 MENU or Home Select USB . 2 ENTER ENTER Select Photo List . Photo List Page 2/3 No Marked Drive1 Up Folder KY103 03/30/2011 JMJ001 KY101 06/10/...
Page 65 - Photo Selection and Pop-up Menu; Select the target folder or drive.; Select the desired photos.; Select the desired Popup menu.
65 U SB Photo Selection and Pop-up Menu V When one or more photos are marked, you can view individual photos or a slide show of the marked photos. If no photos are marked, you can view all photos individually or all photos in the folder in a slide show. 1 Select the target folder or drive. 2 ENTER S...
Page 66 - Full Screen Menu
66 USB U SB 1 Select the target folder or drive. 2 ENTER Select the desired photos. 3 ENTER Show the Pop-up menu. 4 Select View . 5 ENTER The selected photo is displayed in full size. Full Screen Menu You can change the Photo List view so that it fills the screen. More operations are available in fu...
Page 68 - MUSIC LIST
68 USB U SB 1 MENU or Home Select USB . 2 ENTER ENTER Select Photo List . Music List Page 2/3 No Marked Drive1 Title Duration Up Folder A 00:00 / 04:16 Up Folder ὤ㨴㥄 Navigation Popup Menu ὤ㨴㥄 Exit . 3 . 4 . 2 . 1 . 5 . 1 Moves to upper level folder . 2 Preview: If a supported picture of the album ja...
Page 69 - Music Selection and Pop-up Menu; Music List
69 U SB Music Selection and Pop-up Menu V Use the CH ὤ㨴㥄 ὤ㨴㥄 button to navigate in the music page. V If no music is marked, all the music in the folder will be played in sequence. When one or more music files are marked, the marked music files will be played in sequence. If you want to listen to onl...
Page 70 - Pro: Centric contents in USB memory stick can be played.; EXTRA CONTENTS
70 USB U SB Extra Contents will be activated when Data Channel service is available. i Choose the media you want. Close Fl Photo List Music List Extra Contents NOTE G Pro: Centric contents in USB memory stick can be played. G For more information, contact to Customer Support.(www.lgcommercial.com) !...
Page 71 - PIP INPUT; PICTURE CONTROL
71 PIC TU RE C O N TR O L PIP enables the end user to view two sources on the screen at the same time. The end user can switch between the Main and Sub picture sizes. REFERENCE POINT REFERENCE POINT PIP Operation1. Connect auxiliary source(s) to TV connections panel. 2. Enter Installer menu to be su...
Page 72 - PIC; Main Picture Source
72 PICTURE CONTROL PIC TU RE C O N TR O L REFERENCE POINT REFERENCE POINT Main Picture Source Available Sub Picture Sources TV AV1, AV2, HDMI1, HDMI2 AV1or AV2 TV, AV1or AV2, HDMI1, HDMI2 HDMI1or HDMI2 TV, AV1, AV2, HDMI1or HDMI2 Component, RGB-PC TV, AV1, AV2, HDMI1, HDMI2
Page 73 - Press the
73 PIC TU RE C O N TR O L This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. V RGB-PC input source can only use 4:3 or 16:9 aspect ratio. PICTURE SIZE (ASPECT RATIO) CONTROL 1 RATIO Press the RATIO button repeatedly to select the picture options :...
Page 74 - Set by program; Set By Program; Zoom; Just Scan
74 PICTURE CONTROL PIC TU RE C O N TR O L Set by program Selects the proper picture proportion to match the source’s image. (4:3 ὤ㨴㥄 4:3) Set By Program (16:9 ὤ㨴㥄 16:9) Set By Program 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. 16:9 Adjust the picture horizontal...
Page 76 - MANUAL PICTURE ADJUSTMENT - USER MODE
76 PICTURE CONTROL PIC TU RE C O N TR O L Adjust the picture appearance to suit your preference and viewing situations.This feature is disable in “ Picture Mode-Intelligent Sensor ”. MANUAL PICTURE ADJUSTMENT - USER MODE 1 MENU or Home Select PICTURE . 2 ENTER Select Picture Mode . 3 ENTER Select Vi...
Page 77 - Picture Reset; function for each; Picture Mode; PICTURE IMPROVEMENT TECHNOLOGY; Advanced Control
77 PIC TU RE C O N TR O L You can calibrate the screen for each Picture Mode or set the video value according to the special video screen.You can set the video seeing differently for each input. To reset to the factory default after making adjustments to each input source, execute the Picture Reset ...
Page 79 - PICTURE RESET
79 PIC TU RE C O N TR O L Settings of the selected picture modes return to the default factory settings. PICTURE RESET 1 MENU or Home Select PICTURE . 2 ENTER Select Picture Reset . 3 ENTER Select Yes . 4 ENTER Initialize the adjusted value. 5 MENU or Home Return to TV viewing. ὤ㨴㥄 Enter Move PICTUR...
Page 80 - Displays a slide show to explain the various features of this TV.; Data Broadcasting; DEMO MODE; Demo Mode; Demo Mode; OPTION; OPTION
80 PICTURE CONTROL PIC TU RE C O N TR O L Displays a slide show to explain the various features of this TV. NOTE G Data Broadcasting : For 32/37/42LG710H, 32/37/42/47/55LD650H, 32/37/42LD655H G Zone : For 32/37/42LD660H, 32/37/42LD665H, 32/37/42/47/55LV555H ! ? ! ? ! ! DEMO MODE 1 MENU or Home Selec...
Page 81 - SOUND & LANGUAGE CONTROL; Auto Volume
81 SO U N D & L A N G U A G E C O N TR O L Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program.Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is chan...
Page 82 - SO
82 SOUND & LANGUAGE CONTROL SO U N D & L A N G U A G E C O N TR O L 1 MENU or Home Select AUDIO . 2 ENTER Select Sound Mode . 3 ENTER Select Standard , Music , Cinema , Sport , or Game . 4 RETURN Return to the previous menu. MENU or Home Return to TV viewing. Sound Mode lets you enjoy the be...
Page 83 - Adjust the sound to suit your taste and room situations.; SOUND SETTING ADJUSTMENT - USER MODE
83 SO U N D & L A N G U A G E C O N TR O L Adjust the sound to suit your taste and room situations. SOUND SETTING ADJUSTMENT - USER MODE 1 MENU or Home Select AUDIO . 2 ENTER Select Sound Mode . 3 ENTER Select Standard , Music , Cinema , Sport , or Game . 4 ENTER Select Treble or Bass . 5 ENTER ...
Page 84 - SRS TRUSURROUND XT / INFINITE SOUND
84 SOUND & LANGUAGE CONTROL SO U N D & L A N G U A G E C O N TR O L Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement produces an immersive sound experience from standa...
Page 86 - CLEAR VOICE II; Clear Voice II; Level; Adjustment for Clear Voice ll Level With selecting
86 SOUND & LANGUAGE CONTROL SO U N D & L A N G U A G E C O N TR O L By differentiating the human sound range from others, it improves the sound quality of voices. CLEAR VOICE II 1 MENU or Home Select AUDIO . 2 ENTER Select Clear Voice II . 3 ENTER Select On or Off . 4 ENTER Select Level . 5 ...
Page 87 - BALANCE
87 SO U N D & L A N G U A G E C O N TR O L Adjust the left/right sound of speaker to suit your taste and room situations. BALANCE 1 MENU or Home Select AUDIO . 2 ENTER Select Balance . 3 ENTER Make appropriate adjustments. 4 RETURN Return to the previous menu. MENU or Home Return to TV viewing. ...
Page 88 - TV SPEAKERS ON/OFF SETUP
88 SOUND & LANGUAGE CONTROL SO U N D & L A N G U A G E C O N TR O L If you wish to use an external Hi-Fi system or a SRS System, turn off the TV’s internal speakers.In AV, Component, RGB and HDMI with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal.Tur...
Page 89 - AUDIO RESET; Reset
89 SO U N D & L A N G U A G E C O N TR O L Settings of the selected Sound Mode return to the default factory settings. AUDIO RESET 1 MENU or Home Select AUDIO . 2 ENTER Select Reset . 3 ENTER Initialize the adjusted value. 4 MENU or Home Return to TV viewing. Enter Move AUDIO D • Level 3 - + Bal...
Page 90 - STEREO/SAP BROADCAST SETUP; Each time you press the; SAP
90 SOUND & LANGUAGE CONTROL SO U N D & L A N G U A G E C O N TR O L For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the ...
Page 91 - AUDIO LANGUAGE
91 SO U N D & L A N G U A G E C O N TR O L Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV mode. NOTE G Data Broadcasting : For 32/37/42LG710H, 32/37/42/47/55LD650H, 32/37/42LD655H G Zone : For 32/37/42LD660H, 32/37/...
Page 92 - The menus can be shown on the screen in the selected language.; ON-SCREEN MENUS LANGUAGE SELECTION
92 SOUND & LANGUAGE CONTROL SO U N D & L A N G U A G E C O N TR O L The menus can be shown on the screen in the selected language. NOTE G Data Broadcasting : For 32/37/42LG710H, 32/37/42/47/55LD650H, 32/37/42LD655H G Zone : For 32/37/42LD660H, 32/37/42LD665H, 32/37/42/47/55LV555H ! ? ! ? ! !...
Page 93 - is set; Analog Broadcasting System Captions; CAPTION MODE
93 SO U N D & L A N G U A G E C O N TR O L 1 MENU or Home Select OPTION . 2 ENTER Select Caption . 3 ENTER Select On . 4 Select CC1-4 or Text1-4 . 5 RETURN Return to the previous menu. MENU or Home Return to TV viewing. Captions are provided to help the hearing impaired watch TV. Select a captio...
Page 94 - Digital Broadcasting System Captions; Mode is set
94 SOUND & LANGUAGE CONTROL SO U N D & L A N G U A G E C O N TR O L Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program.This function in only availabl...
Page 95 - Caption Option
95 SO U N D & L A N G U A G E C O N TR O L 1 MENU or Home Select OPTION . 2 ENTER Select Caption . 3 ENTER Select On . 4 Select Digital Option . 5 ENTER Select Custom . 6 Customize the Size , Font , etc., to your preference. A preview icon is provided at the bottom of the screen, use it to see t...
Page 96 - TIM; TIME SETTING; Auto Clock Setup; CLOCK SETTING; TIME; TIME
96 TIME SETTING TIM E S ET TIN G TIME SETTING Auto Clock Setup The time is set automatically from a digital channel signal.The digital channel signal includes information for the current time provided by the broadcasting station.Set the clock manually if the current time is set incorrectly by the au...
Page 97 - Manual Clock Setup; If the current time setting is wrong, reset the clock manually.; Manual
97 TIM E S ET TIN G Manual Clock Setup If the current time setting is wrong, reset the clock manually. 1 MENU or Home Select TIME . 2 ENTER Select Clock . 3 ENTER Select Manual . 4 Select the Year, Month, Date, Hour, or Minutes option. 5 Set the Year, Month, Date, Hour, or Minutes option. 6 RETURN R...
Page 98 - AUTO ON/OFF TIME SETTING
98 TIME SETTING TIM E S ET TIN G This function operates only if the current time has been set.The Off Time function overrides the On Time function if they are both set to the same time.The TV must be in standby mode for the On Time to work. AUTO ON/OFF TIME SETTING 1 MENU or Home Select TIME . 2 ENT...
Page 99 - SLEEP TIMER SETTING; Sleep Timer
99 TIM E S ET TIN G 1 MENU or Home Select TIME . 2 ENTER Select Sleep Timer . 3 ENTER Make appropriate adjustments. 4 RETURN Return to the previous menu. MENU or Home Return to TV viewing. The Sleep Timer turns the TV off at the preset time.Note that this setting is cleared when the TV is turned off...
Page 100 - AUTO SHUT-OFF SETTING; Auto Off
100 TIME SETTING TIM E S ET TIN G If set to on and there is no input signal, the TV turns off automatically after 15 minutes. AUTO SHUT-OFF SETTING 1 MENU or Home Select TIME . 2 ENTER Select Auto Off . 3 ENTER Select On or Off . 4 RETURN Return to the previous menu. MENU or Home Return to TV viewin...
Page 101 - V-Chip rating and categories
101 PA RE N TA L C O N TR O L / R A TIN G S PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The defaul...
Page 102 - RE; Setting up Your Password; SET PASSWORD & LOCK SYSTEM; The TV is set up with the initial password; LOCK
102 PARENTAL CONTROL / RATINGS PA RE N TA L C O N TR O L / R A TIN G S 1 MENU or Home Select LOCK. 2 ENTER 1 2 3 4 5 6 7 8 0 9 ABC DEF GHI WXYZ TUV PQRS MNO JKL &@ .:/, Input the password. Set up blocking schemes to block specific channels, ratings, and external viewing sources.A password is req...
Page 103 - Enables or disables the blocking scheme you set up previously.
103 PA RE N TA L C O N TR O L / R A TIN G S Enables or disables the blocking scheme you set up previously. Lock System 1 MENU or Home Select LOCK . 2 ENTER 1 2 3 4 5 6 7 8 0 9 ABC DEF GHI WXYZ TUV PQRS MNO JKL &@ .:/, Input the password. 3 ENTER Select Lock System . 4 ENTER Select On or Off . 5 ...
Page 104 - Set Password; new
104 PARENTAL CONTROL / RATINGS PA RE N TA L C O N TR O L / R A TIN G S Set up blocking schemes to block specific channels, ratings, and external viewing sources.A password is required to gain access to this menu. Set Password 1 MENU or Home Select LOCK . 2 ENTER 1 2 3 4 5 6 7 8 0 9 ABC DEF GHI WXYZ ...
Page 105 - CHANNEL BLOCKING; Block Channel
105 PA RE N TA L C O N TR O L / R A TIN G S Blocks any channels that you do not want to watch or that you do not want your children to watch. CHANNEL BLOCKING 1 MENU or Home Select LOCK . 2 ENTER 1 2 3 4 5 6 7 8 0 9 ABC DEF GHI WXYZ TUV PQRS MNO JKL &@ .:/, Input the password. 3 Select Block Cha...
Page 107 - TV Rating Children; Age
107 PA RE N TA L C O N TR O L / R A TIN G S 1 MENU or Home Select LOCK . 2 ENTER 1 2 3 4 5 6 7 8 0 9 ABC DEF GHI WXYZ TUV PQRS MNO JKL &@ .:/, Input the password. 3 Select TV Rating-Children . 4 ENTER Select Age or Fantasy Violence . 5 ENTER Select block options. 6 RETURN Return to the previous ...
Page 108 - TV Rating General
108 PARENTAL CONTROL / RATINGS PA RE N TA L C O N TR O L / R A TIN G S TV Rating General - For USA Based on the ratings, blocks certain TV programs that you and your family do not want to view. 1 MENU or Home Select LOCK . 2 ENTER 1 2 3 4 5 6 7 8 0 9 ABC DEF GHI WXYZ TUV PQRS MNO JKL &@ .:/, Inp...
Page 109 - TV Rating English; Selecting Canadian English rating system.; PG
109 PA RE N TA L C O N TR O L / R A TIN G S TV Rating English - For CANADA Selecting Canadian English rating system. 1 MENU or Home Select LOCK . 2 ENTER 1 2 3 4 5 6 7 8 0 9 ABC DEF GHI WXYZ TUV PQRS MNO JKL &@ .:/, Input the password. 3 Select TV Rating-English . 4 ENTER Select E , C , C8+ , G ...
Page 110 - TV Rating French; Selecting Canadian French rating system.; Blocking off
110 PARENTAL CONTROL / RATINGS PA RE N TA L C O N TR O L / R A TIN G S TV Rating French - For CANADA Selecting Canadian French rating system. 1 MENU or Home Select LOCK . 2 ENTER 1 2 3 4 5 6 7 8 0 9 ABC DEF GHI WXYZ TUV PQRS MNO JKL &@ .:/, Input the password. 3 Select TV Rating-French . 4 ENTER...
Page 111 - DOWNLOADABLE RATING; Downloadable Rating
111 PA RE N TA L C O N TR O L / R A TIN G S This function is available only for digital channels.This function operates only when TV has received Region5 Rating data. DOWNLOADABLE RATING 1 MENU or Home Select LOCK . 2 ENTER 1 2 3 4 5 6 7 8 0 9 ABC DEF GHI WXYZ TUV PQRS MNO JKL &@ .:/, Input the ...
Page 112 - Enables you to block an input.; EXTERNAL INPUT BLOCKING; Input Block
112 PARENTAL CONTROL / RATINGS PA RE N TA L C O N TR O L / R A TIN G S Enables you to block an input. EXTERNAL INPUT BLOCKING 1 MENU or Home Select LOCK . 2 ENTER 1 2 3 4 5 6 7 8 0 9 ABC DEF GHI WXYZ TUV PQRS MNO JKL &@ .:/, Input the password. 3 Select Input Block . 4 ENTER Select input source....
Page 113 - APPENDIX; TROUBLESHOOTING; Video Problems
113 A PP EN D IX APPENDIX TROUBLESHOOTING Video Problems No picture &No sound V Check whether the product is turned on. V Try another channel. The problem may be with the broadcast. V Is the power cord inserted into wall power outlet? V Check your antenna direction and/or location. V Test the wa...
Page 114 - PP; Audio Problems; PC Mode Problems
114 APPENDIX A PP EN D IX Audio Problems Picture OK but No sound V Press the VOL or VOLUME button. V Sound muted? Press the MUTE button. V Try another channel. The problem may be with the broadcast. V Are the audio cables installed properly? No output from one of the speakers V Adjust Balance in men...
Page 115 - Cleaning the Screen; Cleaning the Cabinet; Please be sure not to use a wet cloth.; Extended Absence; MAINTENANCE
115 A PP EN D IX Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV.Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off you...
Page 116 - PRODUCT SPECIFICATIONS; MODELS
116 APPENDIX A PP EN D IX PRODUCT SPECIFICATIONS V The specifications shown above may be changed without prior notice for quality improvement. MODELS 32LG710H (32LG710H-UA) 37LG710H (37LG710H-UA) 42LG710H (42LG710H-UA) Dimensions(Width x Height xDepth) With stand 797 x 597 x 232.5 mm (31.3 x 23.5 x ...
Page 120 - Programming a code into a remote mode; PROGRAMMING THE REMOTE CONTROL
120 APPENDIX A PP EN D IX The provided universal remote control can be programmed to operate most remote-controllable devices.Note that the remote may not control all models of other brands. Programming a code into a remote mode 1 Testing your remote control. To find out whether your remote control ...
Page 121 - Remote Control Code; VCR
121 A PP EN D IX Remote Control Code VCR Brand Codes Brand Codes Brand Codes AIWA 034 MAGIN 040 SAMSUNG 032 040 102 104 105 107 109 112 113 115 120 122 125 AKAI 016 043 046 124 125 146 MAGNAVOX 031 033 034 041 067 068 AMPRO 072 MARANTZ 012 031 033 067 069 ANAM 031 033 103 SANSUI 022 043 048 135 AUDI...
Page 122 - HDSTB
122 APPENDIX A PP EN D IX Brand Codes Brand Codes Brand Codes ALPHASTAR DSR 123 HITACHI 139 140 RCA 066 106 AMPLICA 050 HOUSTON TRACKER 033 037 039 051 057 104 REALISTIC 043 074 ASTRO PHILIPS(ML) 159 SAMSUNG 123 HUGHES 068 SATELLITE SERVICE CO 028 035 047 057 085 ASTRO THOMPSON(ML) 160 HUMAX(SL) 158...
Page 123 - Tc; Bit “1”; Configuration of frame; st frame; Lead code; Bit description; The waveform is transmitted as long as a key is depressed.; Remote Control IR Codes; Output waveform; Single pulse, modulated with 37.917KHz signal at 455KHz; IR CODES
123 A PP EN D IX 2.25 ms 9 ms 0.55 ms 4.5 ms 9 ms T1 Tc Low custom code Lead code High custom code Data code Data code C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7 Lead code Repeat code Tf Lead code Low custom code High custom code Data code Lead code Low custom code High ...
Page 125 - GNU GENERAL PUBLIC LICENSE; OPEN SOURCE LICENSE
125 A PP EN D IX GNU GENERAL PUBLIC LICENSE Version 2, June 1991 making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow....
Page 129 - GNU LESSER GENERAL PUBLIC LICENSE
129 A PP EN D IX GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is n...
Page 134 - MOZILLA PUBLIC LICENSE
134 APPENDIX A PP EN D IX MOZILLA PUBLIC LICENSE Version 1.1 --------------- 1.10. “Original code” means source code of computer software code which is described in the source code notice required by exhibit as original code, and which, at the time of its release under this license is not already co...
Page 139 - OWNER’S MANUAL; Please read this manual carefully before operating; The model and serial number of the TV is located; MODEL; LCD TV MODELS; LG Customer Information Center
LED LCD TV / LCD TV OWNER’S MANUAL Please read this manual carefully before operating your set and retain it for future reference. P/NO : SAC34134301 (1111-REV05) www.lg.com The model and serial number of the TV is located on the back and/or on one side of the TV. Record these numbers below should y...
Page 140 - EXPERIENCED INSTALLER; Commercial Mode Setup Guide; Lodging Guest Interactive Pro:CentricTM TVs
Master TV Setup pages 11 – 14 Cloning Information pages 24 – 32 FTG Mode of Operation pages 33 – 44 EXPERIENCED INSTALLER Commercial Mode Setup Guide Note: Selected features shown in this guide may not be available on all models. Lodging Guest Interactive Pro:Centric™ TVs 32LD660H 37LD660H 42LD660H ...
Page 144 - Table of Contents
5 206-4200 Table of Contents Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . 3 – 4Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Commercial Mode Overvi...
Page 145 - Commercial Mode Overview; Setup Checklist
6 206-4200 Commercial Mode Overview Typical Installer Menu xxLD66xH PTC INSTALLER MENU 000 INSTALLER SEQ 000 UPN 000-000-000-000 ASIC D279 PTC V1.00.016 CPU V1.21.00 Installer Menu To set up a Master TV for cloning purposes, you will need to know how to enter the commercial controller (PTC) Installe...
Page 146 - Cloning; FTG Mode; This mode enables Pro:Idiom; Remote Management in FTG Mode; Admin Client User Guide; External MPI Control; circuitry for both the embedded
7 206-4200 Commercial Mode Overview (Cont.) Cloning Cloning refers to the process of capturing a Master TV Setup and transferring it to a Target TV (both TVs must be in Pass-through Mode). The Master TV’s clonable setup menu options should be configured as part of the Master TV Setup. If there are f...
Page 147 - Pro:Centric TV Interactive Menu Features; Press; PORTAL; on the Installer Remote to access the interactive menus.; Channel Guide; run in cooperation with the hotel.; Help; Provides help for navigating the interactive menus.; Watch TV; Pro:Centric Operation
8 206-4200 Pro:Centric TV Interactive Menu Features The interactive Pro:Centric TV enables guests—from the comfort of their hotel rooms—to view and select from a complete listing of hotel services and amenities. The Pro:Centric TV is connected to the hotel's billing computer, and service/amenities c...
Page 148 - Pro:Centric Modes of Operation; FTG Mode via CPU; operation and configuration.; Application Tuning Mode
9 206-4200 Pro:Centric Operation (Cont.) Pro:Centric Setup The Pro:Centric server provides the following functionality:• Remote management/administration (TV E-Z Installation): The Pro:Centric server Admin Client provides remote management/administration facilities for downloading splash screens and...
Page 149 - Installer Remote Control Typical Key Functions
10 206-4200 Installer Remote Control Typical Key Functions 1 2 3 4 5 6 7 8 9 0 ABC DEF GHI JKL MNO PQRS TUV WXYZ PIP CH- PIP CH+ PIP SWAP PIP INPUT PIP SAP FLASHBK REMOVE ALPHA/NUM P A G E MUTE TIMER MENU RETURN VOL CH POWER GUIDE INPUT CC ENTER TV DVD VCR STB &@ .:/, RATIO PORTAL INFO i NUMBER ...
Page 150 - Master TV Setup; Before You Begin; Auto Tuning is disabled if there is an Aux input active.; Cloning Methods; menu settings. See “Clonable TV Setup Menu Features” list below.; Clonable TV Setup Menu Features
11 206-4200 Master TV Setup This section describes how to set up a Master TV for cloning purposes when the TV is in Pass-through Mode. Note: Refer to FTG Mode information on pages 33 to 44 for details on entering FTG Mode and configuring/editing FTG Channel Map and FTG Installer Menu settings. Befor...
Page 151 - Master TV Setup Procedure; inputs
12 206-4200 Typical Installer Menu Note: The Installer Menu header will vary depending on the TV you are setting up. Adjust the settings for these Installer Menu items. Master TV Setup Procedure 1. Set Installer Menu items. This step provides specific instruction only on the Installer Menu items tha...
Page 153 - DIGITAL
14 206-4200 6. (Optional) Add Custom Channel and Aux Labels: 2-5-4 + MENU Mode Note: This step is applicable only if you intend to clone the PTC. 2-5-4 + MENU Mode enables you to add/edit channel icons and cus- tom text labels in the PTC once the Master TV Setup has been trans- ferred as described i...
Page 154 - Installer Menu; More detailed descriptions follow the table listing.; Accessing the Installer Menu; Using the Installer Menu
15 206-4200 Installer Menu Typical Installer Menu Use the Installer Menu to set up, change, or view operational settings. Refer to the table starting on the next page for brief descriptions of Installer Menu items. More detailed descriptions follow the table listing. Accessing the Installer Menu 1. ...
Page 157 - Detailed Descriptions of Installer Menu Items
18 206-4200 Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INSTALLER SEQUENCE Specifies entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 001 - POWER MANAGE (Power Management) Determines hours of no activity before automatic shutoff. The Power Mana...
Page 162 - XYZ; NETWORK
23 206-4200 Channel Icons / Custom Text Labels (2-5-4 + MENU Mode) Changing a Channel’s Icon on the Master TV 1. Use Channel Up/Down to select the desired channel. 2. Use the Left/Right arrow keys to select the thin letter “ I ” on the Channel-Time display. 3. Use the Up/Down arrow keys to select th...
Page 163 - Cloning Overview; IMPORTANT CLONING INFORMATION; cloning may not be successful.; Before you begin cloning:
24 206-4200 Cloning Overview IMPORTANT CLONING INFORMATION Starting with these TV models, there are now four different procedures for cloning a Master TV Setup, each with its own advantages and limitations (see also “Cloning Methods” on page 11):• Using a USB memory device / .tlx file• Using a USB m...
Page 164 - USB Cloning Procedures
25 206-4200 USB Cloning Procedures Learning / Teaching a Master TV Setup using a USB Memory Device / .tlx File USB Cloning Notes • Read the IMPORTANT CLONING INFORMATION on page 24 before beginning any cloning procedures. In particular, ensure that the Master TV Setup does not contain a Channel Map;...
Page 168 - Clone Programmer Cloning Procedures; Learn Setup from Master TV
29 206-4200 Clone Programmer Cloning Procedures Learning / Teaching a Master TV Setup using a TLL-1100A Clone Programmer Learn Setup from Master TV 1. Ensure the Master TV is set up completely and in Pass-through Mode. 2. Tune/set the TV to an analog channel or Aux input, and then plug one end of th...
Page 172 - Pro:CentricTM Server Admin Client; FTG Mode via EBL; FTG Mode of Operation Overview; FTG Mode via CPU or EBL
33 206-4200 Caution: (FTG Mode via CPU only) If applicable, IP/network settings must be completed in the IP Environment Menu before a TV is configured for FTG Mode (see page 45 for further information—the default network setting is DHCP). If IP/network requirements change after a TV has been configu...
Page 173 - for further information on the FTG File Manager. Refer to the; Determining the TV Operating Mode; To determine the operating mode of the TV, press; on the Installer Remote. The menu display
34 206-4200 FTG Mode of Operation Overview (Cont.) PICTURE AUDIO INPUT OPTION TIME USB CHANNEL LOCK TV Setup Menus Shows that the TV is in Pass-through Mode . Function Menu Indicates the TV (CPU or EBL) is not in Pass-through Mode . While the TV is in FTG Mode, Installer Menu settings can be accesse...
Page 174 - Creating an FTG Configuration File using the FTG File Manager; Open
35 206-4200 FTG Mode via CPU Creating an FTG Configuration File using the FTG File Manager This section describes how to create an FTG Configuration (.tlx) file that can be saved to a USB memory device. In order to enable Pro:Idiom decryption, it is recommended that you create an FTG Configuration f...
Page 176 - Teaching FTG Configuration to a TV
37 206-4200 1. Plug the USB memory device that contains the FTG Configuration file into the Target LD660H/LD665H or LV555H TV USB IN port. 2. Press MENU on the Installer Remote to display the TV setup menus (TV is in Pass-through Mode) or the Function Menu (TV is already in FTG Mode). 3. Use the arr...
Page 177 - Learning an FTG Configuration File from a TV
38 206-4200 1. Plug a USB memory device into the USB IN port on the TV.2. Press MENU on the Installer Remote to display the TV setup menus (TV is in Pass-through Mode) or the Function Menu (TV is already in FTG Mode). 3. Use the arrow navigation keys to select/highlight either the Option menu icon f...
Page 178 - Optional Manual Configuration / TV Setup
39 206-4200 FTG Mode via CPU (Cont.) Typical Installer Menu Note: The Installer Menu header will vary depending on the TV you are setting up. Use Channel Menu options to run Auto Tuning and edit the channel lineup, as necessary. Adjust the settings for these Installer Menu items. 117 FACT DEFAULT 00...
Page 179 - Jack Panel
40 206-4200 Laptop PC RESET AUDIO IN (RGB/DVI) .......... 2 1 HDMI/DVI IN RJP INTERFACE RGB IN (PC) . . . . . . . . . . . . . . . LAN2 TV-LINK CFG .......... UPDATE RESET AUDIO IN (RGB/DVI) 1 HDMI/DVI IN INTERFACE RGB IN (PC) . . . . . . . . . . . . . . . LAN2 TV-LINK CFG .......... LAN1 RJP Laptop ...
Page 180 - when copied to the list. If you make any change(s) to the current data; FTG File Manager Utilities Overview; FTG File Manager Main Screen
41 206-4200 Note: The data referenced in the FTG Configuration List is only a snap- shot of the current FTG Channel Map and FTG Installer Menu settings when copied to the list. If you make any change(s) to the current data to be included in the FTG Configuration List, you will need to recopy Channel...
Page 181 - FTG Channel Map Configuration Utility; RF Channel Map
42 206-4200 FTG Channel Map Configuration Utility The FTG Channel Map Configuration Utility enables you to build a Channel Map with logical channel numbers. The FTG Channel Map for LD660H/LD665H and LV555H TVs may contain both RF and IP channels. Select the appropriate tab—RF Channel Map or IP Chann...
Page 182 - FTG Channel Map Editor
43 206-4200 FTG File Manager Utilities Overview (Cont.) DELETE Click to remove highlighted channel from FTG Channel Map. ADD After defining a new Logical Channel, click to add channel to the FTG Channel Map. FTG Channel Map Editor The FTG Channel Map Editor shows a single Logical Channel’s data and ...
Page 183 - FTG Installer Menu Configuration Utility
44 206-4200 FTG File Manager Utilities Overview (Cont.) CONFIGURATION SETTINGS Select tabs for categories of Installer Menu items to set up TV. FTG Installer Menu Configuration Utility Notes: • Pro:Centric and LAN tabs enable you to set up parameters equivalent to the Offset Setup and Pro:Centric Me...
Page 184 - IP Environment Setup; Access the IP Environment Menu
45 206-4200 IP Environment Prev. Move Network Setup Offset Setup Pro:Centric IP Environment Prev. Move Network Setup Offset Setup Pro:Centric IP Environment Prev. Move Network Setup Offset Setup Pro:Centric IP Environment Prev. Move Network Setup Offset Setup Pro:Centric IP Environment Prev. Move Ne...
Page 185 - Pro:CentricTM Server Admin
46 206-4200 IP Environment Prev. Move Network Setup Offset Setup Pro:Centric IP Environment Prev. Move Network Setup Offset Setup Pro:Centric IP Environment Prev. Move Network Setup Offset Setup Pro:Centric ModeMedia Type Server IPPort Number Wake On LanData Channel Wake On RFWake On Time Off ► ► 0 ...
Page 186 - Remote Jack Pack / TV Connections & Setup; Remote Jack Pack Setup; RJP AVAILABLE; TV Connections
47 206-4200 Remote Jack Pack / TV Connections & Setup COMPONENT IN RS-232C IN (SERVICE ONLY) UPDATE RESET AUDIO IN (RGB/DVI) . . . . . . . . . R L P B Y P R 1 HDMI/DVI IN OPTICAL DIGITAL INTERFACE VIDEO L/MONO -AUDIO- R AV IN 1 RGB IN (PC) . . . . . . . . . . . . . . . LAN2 TV-LINK CFG GAME CONT...
Page 187 - Reference: Upgrading TV/PTC Software using a USB Memory Device; Upgrading TV/PTC Software
48 206-4200 Reference: Upgrading TV/PTC Software using a USB Memory Device Upgrading TV/PTC Software Before you begin, note that the software upgrade files must be stored in a folder named “LG_DTV” in the root directory of the USB memory device. Also, ensure the USB device has been formatted with FA...
Page 188 - Reference: Downloading a Splash Screen using a USB Memory Device; Splash Screen Image File Guidelines
49 206-4200 Reference: Downloading a Splash Screen using a USB Memory Device Splash Screen Image File Guidelines • The splash screen image must be a 24-bit (RGB 8 x 8 x 8) BMP.• The image should be no larger than 3 MB.• The ideal resolution for the image is 1366 x 768 pixels or under.• The image fil...
Page 189 - Reference: Power Consumption Settings
50 206-4200 Reference: Power Consumption Settings 32/37/42LD660H & 32/37/42LD665H The following tables assume that Installer Menu item 118 POWER SAVINGS is set to 3 (default) and Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 202). Note: Values are results of contr...
Page 191 - Reference: TV Camport Auto Sense Operation; Selectable
52 206-4200 Reference: TV Camport Auto Sense Operation The Camport Auto Sense function is enabled when: 1. Installer Menu item 034 CAMPORT EN is set to 1 AND 2. Installer Menu item 040 AUTO CAMPORT is enabled (1). Selectable : Can be accessed with INPUT key, direct access, etc. Auto Sense : TV switc...
Page 192 - Reference: TV Aux Input Configuration
53 206-4200 Reference: TV Aux Input Configuration DIRECT ACCESS Tuning TV ENABLE MPI DATA START AUX SOURCE ASSIGN- MENT Installer Menu MPI DATA STATUS TYPE 0x41 SOURCES ENABLED (R/W) DATA STATUS TYPE 0xD2 CURRENT AV SOURCE (R) DATA STATUS TYPE 0x0D AUX SOURCE (R) OLD_ OCV = 0 OLD_ OCV = 1 Source Inp...
Page 194 - Reference: RJP Model List and Input Auto-sensing Hierarchy; Digital Video In
55 206-4200 Reference: RJP Model List and Input Auto-sensing Hierarchy RJP Model List Legacy Models Scaler Models RJP-101M RJP-201M RJP-101ML N/A RJP-110F RJP-210F RJP-110FW RJP-210FW RJP-110W RJP-210W RJP-110WBR RJP-210WBR RJP-110S RJP-210S RJP-120G RJP-220G RJP-120T RJP-220T RJP-201B RJP-301B RJP-...
Page 195 - or FTG Mode or on multiple TVs that are currently in FTG Mode.; Installer Menu Item 117 FACT DEFAULT; Channel Map on the Pro:Centric server. Refer to the; Additional FTG Mode via EBL Options; enables you to reset multiple TVs to Pass-through Mode at one time.; will remain in the CPU after the reset is completed.; manual for further information.
56 206-4200 This section describes how to reset factory defaults either on a single TV that is currently in Pass-through or FTG Mode or on multiple TVs that are currently in FTG Mode. Note: If the TV(s) is/are currently in FTG Mode, restoring the factory defaults also resets the TV to Pass- through ...
Page 196 - Reference: TV Zone Restrictions; User Guide
57 206-4200 Reference: TV Zone Restrictions Enter Move OPTION Menu Language : English Audio Language : English Caption : Off Set ID : 1 Demo Mode : Off Zone : 0 Close 1 ► ► The FTG Channel Map Editor in the FTG File Manager’s FTG Channel Map Configuration Utility enables you to assign Zone restricti...
Page 198 - Reference: LV555H Rear Jack Panel
59 206-4200 COMPONENT IN RS-232C IN (SERVICE ONLY) UPDATE RESET AUDIO IN (RGB/DVI) . . . . . . . . . R L P B Y P R 1 HDMI/DVI IN OPTICAL DIGITAL INTERFACE VIDEO L/MONO -AUDIO- R AV IN 1 RGB IN (PC) . . . . . . . . . . . . . . . LAN2 TV-LINK CFG GAME CONTROL /MPI .......... AUDIO OUT SERVICE ONLY SPE...
Page 199 - Reference: Side Connections Panel
60 206-4200 Reference: Side Connections Panel AV IN 2 L/MONO -A UDIO - R VIDEO USB IN USB IN AV IN 2 VIDEO / A UDIO ... ... ... . HDMI/DVI IN 2 USB IN Insert USB memory device for software updates, cloning purposes, FTG Mode via CPU configuration, picture/music entertainment, etc., as applicable. VI...
Page 200 - Reference: RF Antenna Connection
61 206-4200 Antenna or CATV ANTENNA IN LD660H/LD665H TVs only ANTENNA IN Connect to Antenna/ CATV. Note: The Antenna connection for LV555H TVs is located on the rear jack panel (see page 59). Reference: RF Antenna Connection
Page 201 - Troubleshooting; General Troubleshooting; Some Quick and Easy Tips for Resolving Problems
62 206-4200 Troubleshooting General Troubleshooting Some Quick and Easy Tips for Resolving Problems Symptom Possible Cause(s) Possible Solution(s) Installation Cannot direct enter channel number. (TV in Pass-through Mode) Installer Menu item 028 CH. OVERIDE is set to 0, i.e., disabled (recommended s...
Page 202 - Troubleshooting Flowchart
63 206-4200 Controller Quick Check STATUS LED on PTC Board blinking? Plug into AC Power outlet. TV connected to AC Power? Bad TV Yes No No Yes Cycle the power by removing and reconnecting the AC Power cord. Then, observe POWER LED on front of TV. POWER LED lit? No Yes Press POWER on Installer Remote...
Page 203 - Commercial Mode Check / FTG Operation Troubleshooting; FTG Operation Troubleshooting; Symptom; Commercial Mode Check
64 206-4200 Troubleshooting (Cont.) Commercial Mode Check / FTG Operation Troubleshooting TV turned ON? Yes No Press POWER on Installer Remote. TV is not in Commercial Mode. Call Technical Support for assistance. TV is in Commercial Mode. No On-screen menu display no longer toggles? Yes Press MENU r...
Page 204 - Clone Programmer Troubleshooting; clone programmer clock from a TV containing the correct time.
65 206-4200 Troubleshooting (Cont.) Clone Programmer Troubleshooting Caution: Do not connect a clone programmer to a PPV card installed in the Master or Target TVs. Also, if the TV is in LodgeNet PPV Mode (check with the site administrator if you are not certain), do not connect a clone programmer t...
Page 205 - Glossary of Terms; A list of definitions for some of the words found in this guide.
66 206-4200 Glossary of Terms 75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider. The end looks like a hex-shaped nut with a wire through the middle. It screws onto the Antenna/Cable threaded jack on the back of the TV. 300 TO 75 OHM ADAPTER A small device that con...
Page 206 - Document Revision History / Notes; Notes; Date; Revision A: New document; LCD TVs
67 206-4200 Document Revision History / Notes Notes Document Revision History Date Description October 2011 Revision A: New document November 2011 Draft B.2: SI/MPI communication updates Product documentation is available online at: www.LGsolutions.com/products . From the Products page, select TVs, ...
LG 19
User Manual
LG 37
User Manual
LG 42
User Manual
LG 19LD355
User Manual
LG 19LE3300
User Manual
LG 19LS3500
Manual
LG 19LV2300
User Manual
LG 19LV2500
Manual
LG 19MN43D-PZ
User Manual
LG 22LB491U
User Manual
LG 22LD351
User Manual
LG 22LD355
User Manual
LG 22LE5500
User Manual
LG 22LK330
User Manual
LG 22LS3510
Manual
LG 22LV2300
User Manual
LG 26LD355
User Manual
LG 26LE5500
User Manual