LG 32LD340H - Manuals

6 CONTENTS WARNING / CAUTION ...............................2 SAFETY INSTRUCTIONS ......................... 3 FEATURE OF THIS TV ............................... 8 PREPARATION Accessories .............................................................9Front Panel Information ..............................

8 FEATURE OF THIS TV ꔛ Some of these features are not available on all models. IMPORTANT INFORMATION TO PREVENT “IMAGE BURN / BURN-IN” ON YOUR TV SCREEN ꔛ When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed on the TV for an extended period, it can become perm...

9 P R EP A R AT IO N PREPARATION ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below. Owner’s Manual CD Manual Remote Control, Batterie...

PREPARATION P R EP A R AT IO N 10 ꔛ Image shown may differ from your TV. FRONT PANEL INFORMATION Remote Control Sensor Power/Standby Indicator INPUT MENU ENTER CH VOL INPUT MENU ENTER CH VOL CHANNEL ( ▲ , ▼ ) Buttons VOLUME (+, -) Buttons ENTER Button MENU Button INPUT Button POWER Button SPEAKER

11 P R EP A R AT IO N BACK PANEL INFORMATION ꔛ Image shown may differ from your TV. I N 3 H/P USB IN AV IN 2 VIDEO AUDIO L/MONO R ANTENNA/ CABLE IN RGB IN (PC) AUDIO IN (RGB/DVI) RS-232C IN (CONTROL & SERVICE) OPTICAL DIGITAL AUDIO OUT VIDEO AUDIO L/MONO R VIDEO AUDIO COMPONENT IN AV IN 1 Y P B ...

PREPARATION P R EP A R AT IO N 14 STAND INSTRUCTIONS ꔛ Image shown may differ from your TV. 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the parts of the STAND BODY with the STAND BASE of the TV. (Except LD310H, LD330H series) INSTALL...

15 P R EP A R AT IO N ꔛ Image shown may differ from your TV. DETACHMENT PROTECTION COVER After removing the stand, install the included PROTECTION COVER over the hole for the stand.Press the PROTECTION COVER into the TV until you hear it click.When installing the wall mounting bracket, use the PROTE...

PREPARATION P R EP A R AT IO N 16 VESA WALL MOUNTING Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We ...

17 P R EP A R AT IO N CABLE MANAGEMENT ꔛ Image shown may differ from your TV. 1 Connect the cables as necessary.To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Secure the power cord with the PROTECTIVE BRACKET/SCREW or the POWER CORD HOLDER . It will help prevent the power...

PREPARATION P R EP A R AT IO N 18 DESKTOP PEDESTAL INSTALLATION SWIVEL STAND After installing the TV, you can adjust the TV set manually to the left or right direction by 90 º to suit your viewing position. ꔛ Image shown may differ from your TV. For proper ventilation, allow a clearance of 10.1 cm (...

19 P R EP A R AT IO N ATTACHING THE TV TO A DESK The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. ꔛ Image shown may differ from your TV. 1-Screw ( provided as parts of the product) Desk Stand 4-Screws (not p...

21 P R EP A R AT IO N SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward directi...

PREPARATION P R EP A R AT IO N 22 ANTENNA OR CABLE CONNECTION ꔛ To prevent damage do not connect to the power outlet until all connections are made between the devices. ꔛ Image shown may differ from your TV. 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Co...

23 EX TE R N A L EQ U IP M EN T S ET U P EXTERNAL EQUIPMENT SETUP HD RECEIVER SETUP ꔛ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ꔛ This part of EXTERNAL EQUIPMENT SETUP mainly use picture of for 32/37/42LD320H. Y, C B/ P B , C R/ ...

EXTERNAL EQUIPMENT SETUP EX TE R N A L EQ U IP M EN T S ET U P 24 HDMI Connection 1. How to connect 1 Connect the digital set-top box to HDMI/DVI IN 1 or HDMI 2 jack on the TV. 2 No separate audio connection is necessary.HDMI supports both audio and video. 2. How to use ꔛ Turn on the digital set-top...

25 EX TE R N A L EQ U IP M EN T S ET U P DVI to HDMI Connection 1. How to connect 1 Connect the DVI output of the digital set-top box to the HDMI/DVI IN 1 jack on the TV. 2 Connect the digital set-top box audio output to the AUDIO IN (RGB/DVI) jack on the TV. 2. How to use ꔛ Turn on the digital set-...

EXTERNAL EQUIPMENT SETUP EX TE R N A L EQ U IP M EN T S ET U P 26 DVD SETUP Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. 1. How to connect 1 Connect the video outputs (Y, P B , P R ) of the DVD to the COMPONENT IN VIDEO jacks ...

27 EX TE R N A L EQ U IP M EN T S ET U P Composite (RCA) Connection 1. How to connect 1 Connect the AUDIO / VIDEO jacks between TV and DVD. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) 2. How to use ꔛ Turn on the DVD player, insert a DVD. ꔛ Select the AV1 or AV2 ...

EXTERNAL EQUIPMENT SETUP EX TE R N A L EQ U IP M EN T S ET U P 28 VCR SETUP Antenna Connection M. P. I DC-IN RGB IN (PC) AUDIO IN RGB/DVI (DVI) OPTICAL DIGITAL AUDIO OUT /D VI IN COMPONENT IN AV IN RS-232C IN (CONTROL&SERVICE) 1 2 VIDEO AUDIO L(MONO) R VIDEO AUDIO Y P B P R L R ANTENNA IN L R S-...

29 EX TE R N A L EQ U IP M EN T S ET U P OTHER A/V SOURCE SETUP 1. How to connect 1 Connect the AUDIO / VIDEO jacks between TV and external equipment. Match the jack colors.(Video = yellow, Audio Left = white, and Audio Right = red) 2. How to use ꔛ Select the AV1 or AV2 input source on the TV using ...

EXTERNAL EQUIPMENT SETUP EX TE R N A L EQ U IP M EN T S ET U P 30 USB CONNECTION USB IN Memory Key or 1. How to connect 1 Connect the USB device to the USB IN jack on the side of TV. 2. How to use ꔛ After connecting the USB IN jack, you use the USB function.

31 EX TE R N A L EQ U IP M EN T S ET U P PC SETUP 1. How to connect 1 Connect the VGA output of the PC to the RGB IN (PC) jack on the TV. 2 Connect PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. 2. How to use ꔛ Turn on the PC and the TV. ꔛ Select the RGB-PC input source on the TV using th...

33 EX TE R N A L EQ U IP M EN T S ET U P Supported Display Specifications (RGB-PC, HDMI-PC) ! ? ! ? NOTE ► To get the the best picture quality, adjust the PC graphics card to 1920 x 1080 (Other models), 1360 x 768 (32LD310H, 26/32LD320H, 32LD325H, 32LD330H, 32LD333H, 26/32LD340H, 26/32LD343H, 26/32L...

EXTERNAL EQUIPMENT SETUP EX TE R N A L EQ U IP M EN T S ET U P 34 Screen Setup for PC mode You can choose the resolution in RGB-PC mode.The Position, Phase, and Size can also be adjusted.You can choose this option only when the PC resolution is set to 1024X768, 1280X768 or 1360X768. Selecting Resolu...

35 EX TE R N A L EQ U IP M EN T S ET U P Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. Auto Configure 1 MENU Select PICTURE . 2 ENTER Sele...

EXTERNAL EQUIPMENT SETUP EX TE R N A L EQ U IP M EN T S ET U P 36 If the picture is not clear after auto adjustment or if text is shaking, adjust the picture phase manually.This feature operates only in RGB-PC mode. Adjustment for screen Position, Size, and Phase 1 MENU Select PICTURE . 2 ENTER Sele...

37 EX TE R N A L EQ U IP M EN T S ET U P Returns Position , Size , and Phase to the default initial settings. This feature operates only in RGB-PC mode. Screen Reset (Reset to original initial values) 1 MENU Select PICTURE . 2 ENTER Select Screen (RGB-PC) . 3 ENTER Select Reset . 4 ENTER Select Yes ...

W AT C H IN G T V / C H A N N EL C O N TR O L 38 ALARM CH VOL 1 2 34 5 67 8 0 9 P A G E TV TIMER INPUT PORTAL MUTE ENTER FLASHBK MENU CC INFO RETURN EXIT GUIDE EJECT RATIO SAP REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV.The remote control may...

39 W AT C H IN G T V / C H A N N EL C O N TR O L ꔛ Open the battery compartment cover on the back side and install the batteries matching correct polar-ity. ꔛ Install two 1.5V AAA batteries. Don’t mix old or used batteries with new ones. ꔛ Close cover. Installing Batteries VOLUME UP/DOWN Adjusts the...

WATCHING TV / CHANNEL CONTROL W AT C H IN G T V / C H A N N EL C O N TR O L 40 TURNING ON THE TV CHANNEL SELECTION VOLUME ADJUSTMENT Adjust the volume to suit your personal preference. 1 First, connect power cord correctly. At this moment, the TV switches to standby mode. ꔛ In standby mode to turn T...

41 W AT C H IN G T V / C H A N N EL C O N TR O L ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. 1 MENU Display each menu. 2 ENTER Select a menu item. 3 ENTER Accept the current selection. 4 EXIT Return to TV viewing. CHANNEL OPTION PIC...

43 W AT C H IN G T V / C H A N N EL C O N TR O L CUSTOMER SUPPORT Picture Test / Sound Test This function is a customer support function that can execute picture and sound tests. □ Picture Test ꔑ Sound Test □ Product/Service Info. Close No Yes Do you have a sound problem in this screen? ? 1 MENU Sel...

WATCHING TV / CHANNEL CONTROL W AT C H IN G T V / C H A N N EL C O N TR O L 44 Product/Service Info. □ Picture Test □ Sound Test ꔑ Product/Service Info. Close This function shows support and product information.Customer Service Center can differ by country. 1 MENU Select Customer Support . 2 ENTER S...

45 W AT C H IN G T V / C H A N N EL C O N TR O L CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run this function if you change your residence or move the TV. Auto Tuning memorizes only ...

WATCHING TV / CHANNEL CONTROL W AT C H IN G T V / C H A N N EL C O N TR O L 46 Add/Delete Channel (Manual Tuning) When selecting DTV or Cable DTV input signal in Manual Tuning , you can view the on-screen signal strength monitor to see the quality of the signal being received. 1 MENU Select CHANNEL ...

47 W AT C H IN G T V / C H A N N EL C O N TR O L Channel Editing The channels in the Channel Edit List are displayed in black and the channels deleted from the Channel Edit List are displayed in blue.When a channel number is deleted, it means that you will be unable to select it using CH ∧∨ button d...

WATCHING TV / CHANNEL CONTROL W AT C H IN G T V / C H A N N EL C O N TR O L 48 INPUT LIST Only these input signals which are connected to a TV can be activated and selected. 1 INPUT ENTER Select the desired input source. Input List ꔂ Move ꔉ Enter TV AV 1 AV 2 Component RGB-PC HDMI1 HDMI2 USB � Exit ...

49 W AT C H IN G T V / C H A N N EL C O N TR O L EXAMPLE ELECTRONIC PROGRAM GUIDE This is an example of a typical TV electronic program guide showing available programming. On The Political Scene Kids Movies Top Fashions World Events Today Channel 01:30 AM 2:30 AM 2:45 AM 3:00 AM Kids ... Kids ... K...

WATCHING TV / CHANNEL CONTROL W AT C H IN G T V / C H A N N EL C O N TR O L 50 CHANNEL LABEL Choose preset labels for your channels.If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a channel even if you didn’t preset a label for the channel...

51 W AT C H IN G T V / C H A N N EL C O N TR O L DEMO MODE Displays a slide show to explain the various feature of this TV. 1 MENU Select OPTION . 2 ENTER Select Demo Mode . 3 ENTER Select On to show the various feature of the TV. 4 EXIT Return to TV viewing.After a while, Demo Mode . starts. If you...

MY MEDIA M Y M ED IA 52 CONNECTION METHOD MY MEDIA USB Connection ConnecttheUSBdevicetothe USB IN jackonthesideofTV. 1 USB IN I N 3 H/P Memory Key or

53 M Y M ED IA Precautions when using the USB device ► OnlyaUSBstoragedeviceisrecognizable. ► ConnectingaUSBstoragedevicethroughaUSBhubisnotsupported. ► AUSBstoragedevicewhichusesitsowndrivermaynotberecognized. ► TherecognitionspeedofaUSBstoragedevicemaydependoneachdevice. ► PleasedonotturnofftheTVo...

MY MEDIA M Y M ED IA 54 ENTRY MODE The My Media menu will open automatically when you insert a USB drive. My Media can also be accessed by choosing My Media in the user menu.On USB device, you can not add a new folder or delete the existing folder. ꔛ This TV can view JPG image files or play MP3 audi...

55 M Y M ED IA TheOn-ScreenDisplayonyourmodelmaybeslightlydifferent. PHOTO LIST Screen Components Supported photo file: *.JPG ꔛ Baseline:64pixel(width)x64pixel(height)to15360pixel(width)x8640pixel(height) ꔛ Progressive:64pixel(width)x64pixel(height)to1920pixel(width)x1440pixel(height) ꔛ YoucanplayJP...

MY MEDIA M Y M ED IA 56 Photo Selection ꔛ Usethe CH ( ꕌꕍ ) buttontonavigate inthephotopage. ꔛ When one or more photos aremarked, you can view individualphotosoraslideshowofthemarkedphotos.Ifnophotosaremarked,youcan view all photos individually or allphotosinthefolderinaslideshow. Mark Mode View Mark...

57 M Y M ED IA Full Screen Menu Moreoperationsareavailableinfullscreenmode. Theaspectratioofaphotomaychangethesize ofthephotodisplayedonthescreeninfullsize. 1 Selectthetargetfolderordrive. 2 ENTER Selectthedesiredphotos. 3 ENTER Theselectedphotoisdisplayedinfullsize. ꔛ Usethe CH ( ꕌꕍ ) buttontonavig...

59 M Y M ED IA Using the Photo List Function ! ? ! ? NOTE ► OptionvalueschangedinPhotoListdonotaffectMusicList. Set Photo View Menu Options Set Photo View. Slide Speed ◀ Fast ▶ BGM Drive1 • Repeat ◀ On ▶ • Random ◀ Off ▶ � Previous 1 ENTER Showthe Option menu. 2 ENTER Select Set Photo View , Set Vid...

MY MEDIA M Y M ED IA 60 Set Video Menu Options Set Audio Menu Options Set Audio. Sound Mode ◀ Standard ▶ Auto Volume ◀ Off ▶ Clear Voice II ◀ Off ▶ Balance 0 ◀ ▶ � Previous L R 1 Select Picture Mode . 2 Makeappropriateadjustments. 1 Select Sound Mode , Auto Volume , Clear Voice II ,or Balance . 2 Ma...

61 M Y M ED IA MUSIC LIST ThisTVcannotplaybackcopy-protectedfiles.TheOn-ScreenDisplayonyourmodelmaybeslightlydifferent. MUSIC(*.MP3)supportingfileBitrate32Kbps-320Kbps•SamplingrateMPEG1Layer3:32kHz,44.1kHz,48kHz•SamplingrateMPEG2Layer3:16kHz,22.05kHz,24kHz•SamplingrateMPEG2.5Layer3:8kHz,11.025kHz,12...

MY MEDIA M Y M ED IA 62 Music Selection ꔛ Usethe CH ( ꕌꕍ ) buttontonavigate inthemusicpage. ꔛ When one or more music files aremarked, the marked music files willbeplayedinsequence. Mark Mode 1 Selectthetargetfolderordrive. 2 ENTER Selectthedesiredmusicfile. 3 ENTER Musicfilesareplayed. Page 1/1 Musi...

63 M Y M ED IA Using the Music List Function Page 1/1 Music List Page 1/1 � 02:30 / 03:25 002. - B02.mp3 �� � � � � � Play with Photo Option Hide Exit 3 file(s) Marked 001. - B01.mp300:00 002. - B02.mp300:00 003. - B03.mp300:00 004. - B04 .mp300:00 005. - B05 .mp300:00 � � � � Choose options. Set Au...

65 M Y M ED IA ! ? ! ? NOTE ► Music files with copy-protection will not play. ► Press ENTER or � button to stop the screen saver. ꔛ If you don't press any buttons for a while, the play information box will float across the screen. This prevents screen pixel damage due to a fixed image remaining on t...

PICTURE CONTROL P IC TU R E C O N TR O L 66 PICTURE SIZE (ASPECT RATIO) CONTROL PICTURE CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. You can select a different aspect ratio depending on input source (analog broadcasting, digital broa...

P IC TU R E C O N TR O L 67 16:9 Adjust the picture horizontally, in a linear proportion to fill the entire screen. Just Scan Normally the edges of video signals are cropped 1-2%. Just Scan turns off this cropping and shows the complete video. Notes: If there is noise on the edges of the original si...

P IC TU R E C O N TR O L 69 MANUAL PICTURE ADJUSTMENT - USER MODE Adjust the picture appearance to suit your preference and viewing situations. 1 MENU Select PICTURE . 2 ENTER Select Picture Mode . 3 ENTER Select Vivid , Standard , Cinema , Sport , or Game . 4 ENTER Select Backlight , Contrast , Bri...

PICTURE CONTROL P IC TU R E C O N TR O L 70 PICTURE IMPROVEMENT TECHNOLOGY (ADVANCED CONTROL) Advanced Control allows you to adjust some of the advanced features of your LG display.To reset to the factory default after making adjustments to each input source, execute the Picture Reset function for e...

PICTURE CONTROL P IC TU R E C O N TR O L 72 xvYCC ꔛ This is produces richer colors. ꔛ This feature represents rich color as much as conventional video signal. ꔛ This function is enabled in " Picture Mode - Cinema , Expert " when a xvYCC signal is inputted through HDMI.

P IC TU R E C O N TR O L 73 PICTURE RESET 1 MENU Select PICTURE . 2 ENTER Select Picture Reset . 3 ENTER Select Yes . 4 ENTER Initialize the adjusted value. EXIT Return to TV viewing. PICTURE � Move � Enter ꔀ � • Tint 0 • Color Temp. 0 • Advanced Control • Picture Reset • Screen (RGB-PC) R G W C PIC...

S O U N D & L A N G U A G E C O N TR O L 74 SOUND & LANGUAGE CONTROL AUTO VOLUME Auto Volume makes sure that the volume level remains consistent whether you are watching a com-mercial or a regular TV program. Because each broadcasting station has its own signal conditions, volume adjustment ...

S O U N D & L A N G U A G E C O N TR O L 75 CLEAR VOICE II By differentiating the human sound range from others, it improves the sound quality of voices. 1 MENU Select AUDIO . 2 ENTER Select Clear Voice II . 3 ENTER Select On or Off . 4 Select Level . 5 Make appropriate adjustments. Adjustment f...

SOUND & LANGUAGE CONTROL S O U N D & L A N G U A G E C O N TR O L 76 BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. 1 MENU Select AUDIO . 2 ENTER Select Balance . 3 ENTER Make appropriate adjustments. AUDIO � Move � Enter AUDIO � Move � Enter • Auto Vo...

SOUND & LANGUAGE CONTROL S O U N D & L A N G U A G E C O N TR O L 78 SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. 1 MENU Select AUDIO . 2 ENTER Select Sound Mode . 3 ENTER Select Standard , Music , Cinema , Sport , or Game . 4 ENTER Select Inf...

S O U N D & L A N G U A G E C O N TR O L 79 AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO � Move � Enter AUDIO � Move � Enter • Balance 0 • Sound Mode : Standard • Infinite Sound :Off • Treble 50 • Bass 50 • Reset • TV Speaker : On L R L R ꔀ � • Ba...

SOUND & LANGUAGE CONTROL S O U N D & L A N G U A G E C O N TR O L 80 AUDIO LANGUAGE This feature operates only in DTV/Cable DTV mode. 1 MENU Select OPTION . 2 ENTER Select Language . 3 ENTER Select Audio Language . 4 Select your desired language. OPTION � Move � Enter OPTION � Move � Enter •...

S O U N D & L A N G U A G E C O N TR O L 81 ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. 1 MENU Select OPTION . 2 ENTER Select Language . 3 ENTER Select Menu Language . 4 Select your desired language.From this point on, the on-screen menus wil...

SOUND & LANGUAGE CONTROL S O U N D & L A N G U A G E C O N TR O L 82 CAPTION MODE Captions are provided to help the hearing impaired watch TV. Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the scre...

S O U N D & L A N G U A G E C O N TR O L 83 Digital Broadcasting System Captions Choose the language you want the DTV/Cable DTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program.This function in only available when Caption Mode is s...

SOUND & LANGUAGE CONTROL S O U N D & L A N G U A G E C O N TR O L 84 Caption Option Customize the DTV/Cable DTV captions that appear on your screen.This function in only available when Caption Mode is set On . 1 MENU Select OPTION . 2 ENTER Select Caption . 3 ENTER Select On . 4 Select Digit...

85 TIM E S ET TIN G CLOCK SETTING TIME SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting sta-tion.Set the clock manually if the current time is set incorrectly by the...

TIME SETTING TIM E S ET TIN G 86 Manual Clock Setup If the current time setting is wrong, reset the clock manually. 1 MENU Select TIME . 2 ENTER Select Clock . 3 ENTER Select Manual . 4 Select the Year, Month, Date, Hour, or Minute option. 5 Set the Year, Month, Date, Hour, or Minute option. TIME TI...

87 TIM E S ET TIN G AUTO ON/OFF TIME SETTING This function operates only if the current time has been set.The Off Time function overrides the On Time function if they are both set to the same time. The TV must be in standby mode for the On Time to work. 1 MENU Select TIME . 2 ENTER Select Off Time o...

TIME SETTING TIM E S ET TIN G 88 SLEEP TIMER SETTING The Sleep Timer turns the TV off at the preset time.Note that this setting is cleared when the TV is turned off. 1 MENU Select TIME . 2 ENTER Select Sleep Timer . 3 ENTER Make appropriate adjustments. ꔛ To cancel the Sleep Timer , select Off . TIM...

89 PA R EN TA L C O N TR O L / R AT IN G PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default s...

PARENTAL CONTROL / RATINGS PA R EN TA L C O N TR O L / R AT IN G 90 Change the password by inputting a new password twice. Set Password 1 MENU ENTER Select LOCK . 2 1 2 34 5 0 6 7 8 9 Input the password. 3 Select Set Password . 4 ENTER 1 2 34 5 0 6 7 8 9 Choose any 4 digits for your new password.As ...

91 PA R EN TA L C O N TR O L / R AT IN G Enables or disables the blocking scheme you set up previously. Lock System 1 MENU ENTER Select LOCK . 2 1 2 34 5 0 6 7 8 9 Input the password. 3 Select Lock System . 4 ENTER Select On or Off . ꔛ When you select On , the Lock System is enable. LOCK LOCK � Move...

PARENTAL CONTROL / RATINGS PA R EN TA L C O N TR O L / R AT IN G 92 CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. ꔛ If a channel is locked, enter the password to unlock it temporarily. 1 MENU ENTER Select LOCK . 2 1 2 34 5 0 6 7 8 ...

PARENTAL CONTROL / RATINGS PA R EN TA L C O N TR O L / R AT IN G 94 TV Rating Children Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature...

95 PA R EN TA L C O N TR O L / R AT IN G TV Rating General Based on the ratings, blocks certain TV programs that you and your family do not want to view. ꔛ Age (applies to TV-G,TV-PG,TV- 14,TV-MA). ꔛ Dialogue -sexual dialogue (applies to TV-PG,TV-14). ꔛ Language -adult language (applies to TV-PG, TV...

PARENTAL CONTROL / RATINGS PA R EN TA L C O N TR O L / R AT IN G 96 DOWNLOADABLE RATING This function is available only for digital channels.This function operates only when TV has received Region5 Rating data. ꔛ If a Downloadable rating is locked, enter the password to unlock it tem-porarily. 1 MEN...

97 PA R EN TA L C O N TR O L / R AT IN G EXTERNAL INPUT BLOCKING Enables you to block an input. 1 MENU ENTER Select LOCK . 2 1 2 34 5 0 6 7 8 9 Input the password. 3 Select Input Block . 4 ENTER Select input source. 5 Select On or Off . LOCK LOCK � Move � Enter � Move � Enter • Block Channel • Movie...

98 APPENDIX A P P EN D IX APPENDIX Abnormal Operation The remote control doesn’t work ꔛ Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ꔛ Ensure that the batteries are installed with co...

99 A P P EN D IX PC Mode Problems The signal is out of range ꔛ Adjust resolution, horizontal frequency, or vertical frequency on the PC. ꔛ Check the input source. Vertical bar or stripe on background & Horizontal Noise & Incorrect position ꔛ Activate the Auto configure feature or adjust size...

100 APPENDIX A P P EN D IX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here’s a great way to ...

102 APPENDIX A P P EN D IX Code (Hexa) Function Note Code (Hexa) Function Note 00 CH ꕌ Remote Control Button B0 ꕖ Remote Control Button 01 CH ꕍ Remote Control Button B1 ꕗ Remote Control Button 02 VOL + Remote Control Button BA ꕘ Remote Control Button 03 VOL - Remote Control Button D6 TV Discrete IR ...

103 A P P EN D IX OPEN SOURCE LICENSE Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim cop- ies of this license document, but changing it is not allowed. Preamble The licenses for...

107 A P P EN D IX Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim cop- ies of this license document, but changing it is not allowed. [This is the first released version of the Les...

112 APPENDIX A P P EN D IX 1.Definitions. 1.0.1. “Commercial use” means distribution or otherwise making the covered code available to a third party. 1.1. “Contributor” means each entity that creates or con- tributes to the creation of modifications. 1.2. “Contributor version” means the combination ...

OWNER’S MANUAL LCD TV Please read this manual carefully before operating your set and retain it for future reference. P/NO : SAC34026009 (1104-REV03) www.lg.com The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. MODEL SE...

Commercial Mode Setup pages 12 – 13 Cloning Information pages 27 – 32 b -LAN™ Setup & Overview page 39 EXPERIENCED INSTALLER Commercial Mode Setup Guide Note: Selected features shown in this guide may not be available on all models. Lodging Guest Interactive Pro:Centric™ TVs © Copyright 2011, LG...

5 206-4163 Table of Contents Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Important Safety Instructions . . . . . . . . . . . . . . . . . . . 3 – 4Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Setup Checklist / Overview . . . . . . ....

6 206-4163 Installation and Setup Checklist __ Unpack TV and all accessories. __ Install batteries in remote control. __ Install TV on VESA mount or stand. Note: It may be advisable to make all cable connections before installing on VESA mount or stand, as appropriate. Hardware Connections __ Instal...

7 206-4163 Important: Pro:Centric operation requires that Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL be set appropriately and that the TV be in PPV or FTG Mode. The interactive Pro:Centric TV enables guests—from the comfort of their hotel rooms—to view and select from a complete listi...

9 206-4163 Side Connections Panel / RF Antenna & MPI Connections AV IN 2 L/MONO -A UDIO - R VIDEO USB IN USB IN Insert USB memory device for software updates, cloning pur- poses, or picture/music enter- tainment, as applicable. Antenna or CATV ANTENNA IN MP I RF Antenna & MPI Connections (32...

10 206-4163 Installer Overview This is the Commercial Mode Setup Guide only. Installer Menu / Commercial Mode Setup To set up a Master TV, you will need to know how to enter the TV Installer Menu and make changes to the default values as required. Similarly, to configure a single TV’s Installer Menu...

11 206-4163 Installer Remote Control Typical Key Functions MENU MUTE VOL CH P A G E RETURN INPUT TV ALARM TIMER 1 2 34 5 6 7 8 0 9 FLASHBK PORTAL ENTER GUIDE EXIT INFO EJECT SAP RATIO CC i NUMBER Buttons (0 - 9) DASH Use to enter a program number or channel. Dash is used for sub-channel numbers such...

12 206-4163 Commercial Mode Setup for Master TV XXLD320H PTC INSTALLER MENU 000 INSTALLER SEQ 000 UPN 000-000-000-000 FPGA E0F1 PTC V1.00.000 CPU V3.06.00 117 FACT DEFAULT 001 003 BAND/AFC 00X Typical TV Installer Menu Note: The Installer Menu header will vary depending on the TV you are setting up....

13 206-4163 028 CH. OVERIDE 000 After verifying the TV Setup, set Installer Menu item 028 CH. OVERIDE to 000.* Commercial Mode Setup for Master TV (Cont.) DIGITAL 19-3 WXYZ MONO STEREO SAP Custom Text Label “WXYZ” created in 2-5-4 + MENU (Add Channel Label) Mode. (Continued from previous page) 3. Ru...

14 206-4163 Installer Menu Typical TV Installer Menu XXLD320H PTC INSTALLER MENU 000 INSTALLER SEQ 000 UPN 000-000-000-000 FPGA E0F1 PTC V1.00.000 CPU V3.06.00 Use the Installer Menu to set up or change operational settings. Refer to the table starting on the next page for brief descriptions of Inst...

17 206-4163 Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INSTALLER SEQUENCE Speci es entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 001 - POWER MANAGE (Power Management) Determines hours of no activity before automatic shutoff. The Power Manag...

21 206-4163 TV Setup Menus Overview On-screen setup menus control the features of the TV. Press MENU on the Installer Remote to access the TV setup menus, and set the TV features to the desired configuration for the end user. CHANNEL PICTURE AUDIO INPUT OPTION LOCK TIME MY MEDIA Refer to the Owner’s...

22 206-4163 Adding Channel Label Icons / Custom Channel Labels(2-5-4 + MENU Mode) Changing a Channel’s Icon on the Master TV 1. Use Channel Up/Down to select the channel for which to change the icon. 2. Use the Left/Right arrow keys to select the thin letter “ I ” on the Channel ID display. 3. Use t...

23 206-4163 FTG Mode of Operation FTG Con fi guration Overview Laptop PC UPDATE RESET AUDIO IN (RGB/DVI) RS-232C IN (SERVICE ONLY) . . . . . . . . . . . . . . . . . . . 2 1 HDMI /DVI IN RJP VIDEO L/MONO -AUDIO- R AV IN 1 RGB IN (PC) . . . . . . . . . . . . . . . TV-LINK CFG GAME CONTROL . . . . . . ...

24 206-4163 CHANNEL PICTURE AUDIO INPUT OPTION LOCK TIME MY MEDIA TV Setup Menus Shows that the EBL is in Pass-through Mode . Function Menu Shows that the EBL is in FTG Mode . While this menu is present on-screen, Installer Menu settings can ONLY be accessed/changed using the FTG Configuration Appli...

27 206-4163 Installer Menu Installer Menu item settings Channel Auto Tuning (Channel Lineup) Manual Tuning Channel Edit Channel Label Picture Aspect Ratio Picture Mode Advanced Control Audio Auto Volume Clear Voice Sound Mode Balance TV Speaker Option Menu Language Audio Language Caption Caption Mod...

28 206-4163 Cloning Procedures Learning / Teaching a Master TV Setup using a USB Memory Device Learn Setup from Master TV 1. Ensure the Master TV is set up completely and the EBL is in Pass-through Mode. 2. Plug the USB memory device into the USB IN port on the Master TV.3. Press MENU to display the...

33 206-4163 Remote Jack Pack Setup RJP Available? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093 RJP AVAILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP AVAILABLE to 001). See Installer Menu detailed descriptions for further informati...

34 206-4163 XXLD320H PTC INSTALLER MENU 000 INSTALLER SEQ 000 UPN 000-000-000-000 FPGA E0F1 PTC V1.00.000 CPU V3.06.00 Reference: Upgrading TV/PTC Software using a USB Memory Device Upgrading TV/PTC Software Before you begin, note that the software upgrade les must be stored in a folder named “LG_DT...

35 206-4163 Reference: Downloading a Splash Screen using a USB Memory Device Splash Screen Image File Guidelines • The splash screen image must be a baseline (not progressive) JPEG.• The image should be no larger than 1 MB.• The ideal size for the image is 1366 x 768 pixels or under.• The image le m...

36 206-4163 Reference: Power Consumption Settings The following tables assume that Installer Menu item 118 POWER SAVINGS is set to 003 (default) and Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 100). Item 099 Back Lighting (Static) 26LD320H 32LD320H / 32LD325H 37LD32...

37 206-4163 Reference: TV Camport Auto Sense Operation The Camport Auto Sense function is enabled when: 1. Installer Menu item 034 CAMPORT EN is set to 1 AND 2. Installer Menu item 040 AUTO CAMPORT is enabled (1). Selectable : Can be accessed with INPUT key, direct access, etc. Auto Sense : TV switc...

38 206-4163 Reference: TV Aux Input Configuration DIRECT ACCESS Tuning TV ENABLE MPI DATA START AUX SOURCE ASSIGN- MENT Installer Menu MPI DATA STATUS TYPE 0x41 SOURCES ENABLED (R/W) DATA STATUS TYPE 0xD2 CURRENT AV SOURCE (R) DATA STATUS TYPE 0x0D AUX SOURCE (R) OLD_ OCV = 0 OLD_ OCV = 1 Source Inp...

40 206-4163 Reference: RJP Model List and Input Auto-sensing Hierarchy RJP Model List Legacy Models Scaler Models RJP-101M N/A RJP-101ML N/A RJP-110F RJP-210F RJP-110FW RJP-210FW RJP-110W RJP-210W RJP-110WBR RJP-210WBR RJP-110S RJP-210S RJP-120G RJP-220G RJP-120T RJP-220T RJP-201B RJP-301B RJP-202B ...

41 206-4163 Troubleshooting General Troubleshooting Some Quick and Easy Tips for Resolving Problems Software Problems Cannot direct enter channel number or “No Signal” appears. Channel not included in channel lineup in TV controller. After 2-5-5 + MENU, only channels included in TV controller will a...

42 206-4163 Controller Quick Check STATUS LED on PTC Board blinking? Plug into AC Power outlet. TV connected to AC Power? Bad TV Yes No No Yes Cycle the power by removing and reconnecting the AC Power cord. Then, observe POWER LED on front of TV. POWER LED lit? No Yes Press POWER on Installer Remote...

43 206-4163 Troubleshooting (Cont.) Commercial Mode Check / FTG Operation Troubleshooting Press POWER on Installer Remote. TV responded? Bad TV Yes No TV stopped responding or continued to respond? TV is in Commercial Mode. Stopped responding TV is not in Commercial Mode. Call Technical Support for ...

44 206-4163 Warning: Do not connect a clone programmer to a PPV card installed in the Master or Target TVs. Also, if the TV is in LodgeNet PPV Mode (check with the site administrator if you are not certain), do not connect a clone programmer to the GAME CONTROL/MPI port. Either of these actions will...

45 206-4163 75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider. The end looks like a hex-shaped nut with a wire through the middle. It screws onto the Antenna/Cable threaded jack on the back of the TV. 300 TO 75 OHM ADAPTER A small device that connects a 2-wire 300...

46 206-4163 Document Revision History / Notes Notes Document Revision History Date Description December 2010 Revision A: New Document January 2011 Revision B: Includes LD325H TVs Product documentation is available online at: www.LGsolutions.com/products . From the Products page, select TVs, Systems ...

6 206-4177 Installation and Setup Checklist __ Unpack TV and all accessories. __ Install batteries in remote control. __ Install TV on VESA mount or stand. Note: It may be advisable to make all cable connections before installing on VESA mount or stand, as appropriate. Hardware Connections __ Instal...

8 206-4177 UPDATE RESET AUDIO IN (RGB/DVI) RS-232C IN (SERVICE ONLY) . . . . . . . . . . . . . . . . . . . 2 1 HDMI /DVI IN VIDEO L/MONO -AUDIO- R AV IN 1 RGB IN (PC) . . . . . . . . . . . . . . . . . . . . . . . . . REMOTE CONTROL OUT SPEAKER OUT 8 HDMI COMPONENT IN R L P B Y P R VIDEO AUDIO ( ) LD...

29 206-4177 CHANNEL PICTURE AUDIO INPUT OPTION LOCK TIME MY MEDIA TV Setup Menus Shows that the TV is in Pass-through Mode . Function Menu Shows that the TV is in FTG Mode . While this menu is present on-screen, Installer Menu settings can ONLY be changed using the FTG Configuration Application to u...

31 206-4177 FTG Mode of Operation (Cont.) Teaching FMA Con fi guration to a TV / Learning an FMA Con fi guration File from a TV Teaching FMA Configuration to a TV 1. Plug the USB memory device that contains the FMA Con guration le into the Target LD310H TV USB IN port. 2. Press MENU to display the T...

33 206-4177 The FTG Channel Map Configuration Utility enables you to build a Channel Map with logical channel numbers. Note: Write, Read, and Learn functions in the FTG Channel Map Configuration Utility are used for local FTG configuration of TVs that support a direct connection to a PC. These funct...

34 206-4177 FTG Mode of Operation (Cont.) FTG Channel Map Editor Overview DELETE Click to remove highlighted channel from FTG Channel Map. ADD After defining a new Logical Channel, click to add channel to the FTG Channel Map. The FTG Channel Map Editor shows a single Logical Channel’s Data and the F...

36 206-4177 Note: The data referenced in the FMA Con fi guration List is only a snap- shot of the current FTG Channel Map and FTG Installer Menu settings when copied to the list. If you make any change(s) to the current data to be included in the FMA Con fi guration List, you will need to recopy Cha...

9 206-4186 Side Connections Panel / RF Antenna Connection AV IN 2 L/MONO -A UDIO - R VIDEO USB IN USB IN Insert USB memory device for software updates, cloning purposes, or picture/music entertainment, as applicable. Antenna or CATV ANTENNA IN RF Antenna Connection (32/37/42LD340H, 32/37/42LD343H an...

22 206-4186 Adding Channel Icons / Custom Channel Labels (2-5-4 + MENU Mode) Changing a Channel’s Icon on the Master TV 1. Use Channel Up/Down to select the desired channel. 2. Use the Left/Right arrow keys to select the thin letter “ I ” on the Channel ID display. 3. Use the Up/Down arrow keys to s...

29 206-4186 FTG Mode of Operation Overview FTG Mode via CPU or EBL FTG Mode enables Pro:Idiom decryption and also allows logical channel mapping of physical channels. There are two separate and distinct methods for configuring LD340H/LD343H/LD345H TVs for FTG Mode of operation: one (new) method is t...

30 206-4186 FTG Mode of Operation Overview (Cont.) CHANNEL PICTURE AUDIO INPUT OPTION LOCK TIME MY MEDIA TV Setup Menus Shows that the TV is in Pass-through Mode . Function Menu Indicates the TV (CPU or EBL) is in FTG Mode . While the TV is in FTG Mode, Installer Menu settings can be accessed as rea...

31 206-4186 FTG Mode via CPU Creating an FMA Configuration File using the FTG Configuration Application This section describes how to create an FMA Configuration file that can be saved to a USB memory device. In order to enable Pro:Idiom decryption, it is recommended that you create an FMA Configura...

32 206-4186 FTG Mode via CPU (Cont.) Caution: If the TV EBL is already in FTG Mode, you cannot use this procedure to make changes to the FTG Channel Map and FTG Installer Menu settings. You must use a direct PC-to-TV connection as described on page 35 or an FMA head end device to reconfigure the EBL...

34 206-4186 FTG Mode via CPU (Cont.) Typical TV Installer Menu Note: The Installer Menu header will vary depending on the TV you are setting up. Run Auto Tuning and edit the channel lineup, as necessary. Adjust the settings for these Installer Menu items. 117 FACT DEFAULT 001 003 BAND/AFC 00X xxLD34...

35 206-4186 Laptop PC UPDATE RESET AUDIO IN (RGB/DVI) RS-232C IN (SERVICE ONLY) . . . . . . . . . .......... 2 1 HDMI /DVI IN RJP VIDEO L/MONO -AUDIO- R AV IN 1 RGB IN (PC) . . . . . . . . . . . . . . . TV-LINK CFG GAME CONTROL/ MPI .......... REMOTE CONTROL OUT SPEAKER OUT HDMI COMPONENT IN R L P B...

36 206-4186 FTG Channel Map Configuration Utility The FTG Channel Map Configuration Utility enables you to build a Channel Map with logical channel numbers. Note: Write, Read, and Learn functions in the FTG Channel Map Configuration Utility are used for direct PC-to-TV FTG configuration of LD340H/LD...

37 206-4186 FTG Configuration Application Utilities Overview (Cont.) DELETE Click to remove highlighted channel from FTG Channel Map. ADD After defining a new Logical Channel, click to add channel to the FTG Channel Map. FTG Channel Map Editor The FTG Channel Map Editor shows a single Logical Channe...

38 206-4186 FTG Configuration Application Utilities Overview (Cont.) CONFIGURATION SETTINGS Select tabs for categories of Installer Menu items to set up TV. HOSPITAL-GRADE TV ONLY Set Hospital items on Installer Menu for hospital-grade TVs. FTG Installer Menu Configuration Utility Note: Write, Read,...

39 206-4186 Note: The data referenced in the FMA Configuration List is only a snap- shot of the current FTG Channel Map and FTG Installer Menu settings when copied to the list. If you make any change(s) to the current data to be included in the FMA Configuration List, you will need to recopy Channel...

48 206-4186 This section describes how you can reset a TV that is currently in FTG Mode to Pass-through Mode. Note that the reset to Pass-through Mode will also restore all factory default settings on the TV. FTG Mode via CPU There are three options for resetting Pass-through Mode on TVs that are in...

52 206-4186 Warning: Do not connect a clone programmer to a PPV card installed in the Master or Target TVs. Also, if the TV is in LodgeNet PPV Mode (check with the site administrator if you are not certain), do not connect a clone programmer to the GAME CONTROL/MPI port. Either of these actions will...

53 206-4186 75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider. The end looks like a hex-shaped nut with a wire through the middle. It screws onto the Antenna/Cable threaded jack on the back of the TV. 300 TO 75 OHM ADAPTER A small device that connects a 2-wire 300...

54 206-4186 Document Revision History / Notes Notes Document Revision History Date Description May 2011 Revision A: New document Product documentation is available online at: www.LGsolutions.com/products . From the Products page, select TVs, Systems & Solutions , then LCD TVs , then the applicab...

29 206-4185 LOCK PICTURE AUDIO INPUT OPTION TIME MY MEDIA CHANNEL TV Setup Menus Shows that the TV is in Pass-through Mode . Function Menu Indicates the TV CPU is in FTG Mode . While the TV is in FTG Mode, Installer Menu settings can be accessed as read-only using an Installer Remote. To make change...

34 206-4185 FTG Channel Map Configuration Utility The FTG Channel Map Configuration Utility enables you to build a Channel Map with logical channel numbers. Note: Write, Read, and Learn functions in the FTG Channel Map Configuration Utility are used for local FTG configuration of TVs that support a ...

43 206-4185 This section describes how you can reset a TV that is currently in FTG Mode to Pass-through Mode. Note that the reset to Pass-through Mode will also restore all factory default settings on the TV. There are three options for resetting Pass-through Mode on TVs that are in FTG Mode. The fi...

6 CONTENTS WARNING ..........................................................2 SAFETY INSTRUCTIONS ......................... 3 FEATURE OF THIS TV ............................... 8 PREPARATION Accessories .............................................................9Front Panel Information .............

8 FEATURE OF THIS TV ꔛ Some of these features are not available on all models. IMPORTANT INFORMATION TO PREVENT “IMAGE BURN / BURN-IN” ON YOUR TV SCREEN ꔛ When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed on the TV for an extended period, it can become perm...

9 P R EP A R AT IO N PREPARATION ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please con-tact the dealer where you purchased the TV. The accessories included may differ from the images below. Owner’s Manual CD Manual Remote Control, Batteri...

PREPARATION P R EP A R AT IO N 10 ꔛ Image shown may differ from your TV. FRONT PANEL INFORMATION Remote Control Sensor Power/Standby Indicator INPUT MENU ENTER CH VOL INPUT MENU ENTER CH VOL CHANNEL ( ▲ , ▼ ) Buttons VOLUME (+, -) Buttons ENTER Button MENU Button INPUT Button POWER Button SPEAKER

11 P R EP A R AT IO N BACK PANEL INFORMATION ꔛ Image shown may differ from your TV. I N 3 H/P USB IN AV IN 2 VIDEO AUDIO L/MONO R ANTENNA/ CABLE IN RGB IN (PC) AUDIO IN (RGB/DVI) RS-232C IN (CONTROL & SERVICE) OPTICAL DIGITAL AUDIO OUT VIDEO AUDIO L/MONO R VIDEO AUDIO COMPONENT IN AV IN 1 Y P B ...

PREPARATION P R EP A R AT IO N 14 STAND INSTRUCTIONS ꔛ Image shown may differ from your TV. 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the parts of the STAND BODYwith the STAND BASE of the TV. (Except 32/37LD310H, 32/37LD330H) INSTA...

15 P R EP A R AT IO N ꔛ Image shown may differ from your TV. DETACHMENT PROTECTION COVER After removing the stand, install the included PROTECTION COVER over the hole for the stand.Press the PROTECTION COVER into the TV until you hear it click.When installing the wall mounting bracket, use the PROTE...

PREPARATION P R EP A R AT IO N 16 VESA WALL MOUNTING Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building mate-rials, please contact your nearest installer.If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.We r...

17 P R EP A R AT IO N CABLE MANAGEMENT ꔛ Image shown may differ from your TV. 1 Connect the cables as necessary.To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Secure the power cord with the PROTECTIVE BRACKET/SCREW or the POWER CORD HOLDER . It will help prevent the power...

PREPARATION P R EP A R AT IO N 18 DESKTOP PEDESTAL INSTALLATION SWIVEL STAND After installing the TV, you can adjust the TV set manually to the left or right direction by 90 º to suit your viewing position. ꔛ Image shown may differ from your TV. For proper ventilation, allow a clearance of 10.1 cm (...

19 P R EP A R AT IO N ATTACHING THE TV TO A DESK The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, poten- tially causing injury or damaging the product. ꔛ Image shown may differ from your TV. 1-Screw ( provided as parts of the product) Desk Stand ► You can sel...

PREPARATION P R EP A R AT IO N 20 ! ? ! ? WARNING ► To prevent TV from falling over, the TV should be securely attached to the floor/wall per installa- tion instructions. Tipping, shaking, or rocking the machine may cause injury. 32/37LD310H, 32/37LD330H 4-Screws (not provided as parts of the produc...

21 P R EP A R AT IO N SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward directi...

PREPARATION P R EP A R AT IO N 22 ANTENNA OR CABLE CONNECTION ꔛ To prevent damage do not connect to the power outlet until all connections are made between the devices. ꔛ Image shown may differ from your TV. 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Co...

23 EX TE R N A L EQ U IP M EN T S ET U P EXTERNAL EQUIPMENT SETUP HD RECEIVER SETUP ꔛ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ꔛ This part of EXTERNAL EQUIPMENT SETUP mainly use picture of for 32/37/42LD320H. Y, C B/ P B , C R/ ...

EXTERNAL EQUIPMENT SETUP EX TE R N A L EQ U IP M EN T S ET U P 24 HDMI Connection 1. How to connect 1 Connect the digital set-top box to HDMI/DVI IN 1 or HDMI 2 jack on the TV. 2 No separate audio connection is necessary.HDMI supports both audio and video. 2. How to use ꔛ Turn on the digital set-top...

25 EX TE R N A L EQ U IP M EN T S ET U P DVI to HDMI Connection 1. How to connect 1 Connect the DVI output of the digital set-top box to the HDMI/DVI IN 1 jack on the TV. 2 Connect the digital set-top box audio output to the AUDIO IN (RGB/DVI) jack on the TV. 2. How to use ꔛ Turn on the digital set-...

EXTERNAL EQUIPMENT SETUP EX TE R N A L EQ U IP M EN T S ET U P 26 DVD SETUP Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. 1. How to connect 1 Connect the video outputs (Y, P B , P R ) of the DVD to the COMPONENT IN VIDEO jacks ...

27 EX TE R N A L EQ U IP M EN T S ET U P Composite (RCA) Connection 1. How to connect 1 Connect the AUDIO / VIDEO jacks between TV and DVD. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) 2. How to use ꔛ Turn on the DVD player, insert a DVD. ꔛ Select the AV1 or AV2 ...

EXTERNAL EQUIPMENT SETUP EX TE R N A L EQ U IP M EN T S ET U P 28 VCR SETUP Antenna Connection M. P. I DC-IN RGB IN (PC) AUDIO IN RGB/DVI (DVI) OPTICAL DIGITAL AUDIO OUT /D VI IN COMPONENT IN AV IN RS-232C IN (CONTROL&SERVICE) 1 2 VIDEO AUDIO L(MONO) R VIDEO AUDIO Y P B P R L R ANTENNA IN L R S-...

29 EX TE R N A L EQ U IP M EN T S ET U P OTHER A/V SOURCE SETUP 1. How to connect 1 Connect the AUDIO / VIDEO jacks between TV and external equipment. Match the jack colors.(Video = yellow, Audio Left = white, and Audio Right = red) 2. How to use ꔛ Select the AV1 or AV2 input source on the TV using ...

EXTERNAL EQUIPMENT SETUP EX TE R N A L EQ U IP M EN T S ET U P 30 USB CONNECTION USB IN Memory Key or 1. How to connect 1 Connect the USB device to the USB IN jack on the side of TV. 2. How to use ꔛ After connecting the USB IN jack, you use the USB function.

31 EX TE R N A L EQ U IP M EN T S ET U P PC SETUP 1. How to connect 1 Connect the VGA output of the PC to the RGB IN (PC) jack on the TV. 2 Connect PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. 2. How to use ꔛ Turn on the PC and the TV. ꔛ Select the RGB-PC input source on the TV using th...

33 EX TE R N A L EQ U IP M EN T S ET U P Supported Display Specifications (RGB-PC, HDMI-PC) ! ? ! ? NOTE ► To get the the best picture quality, adjust the PC graphics card to 1920 x 1080 (Other models), 1360 x 768 (26/32LD320H, 32LD325H, 26/32LD340H, 26/32LD345H, 32LD310H, 32LD330H). ► Depending on ...

EXTERNAL EQUIPMENT SETUP EX TE R N A L EQ U IP M EN T S ET U P 34 Screen Setup for PC mode You can choose the resolution in RGB-PC mode.The Position, Phase, and Size can also be adjusted.You can choose this option only when the PC resolution is set to 1024X768, 1280X768 or 1360X768. Selecting Resolu...

35 EX TE R N A L EQ U IP M EN T S ET U P Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. Auto Configure 1 MENU Select PICTURE . 2 ENTER Sele...

EXTERNAL EQUIPMENT SETUP EX TE R N A L EQ U IP M EN T S ET U P 36 If the picture is not clear after auto adjustment or if text is shaking, adjust the picture phase manually.This feature operates only in RGB-PC mode. Adjustment for screen Position, Size, and Phase 1 MENU Select PICTURE . 2 ENTER Sele...

37 EX TE R N A L EQ U IP M EN T S ET U P Returns Position , Size , and Phase to the default initial settings. This feature operates only in RGB-PC mode. Screen Reset (Reset to original initial values) 1 MENU Select PICTURE . 2 ENTER Select Screen (RGB-PC) . 3 ENTER Select Reset . 4 ENTER Select Yes ...

W AT C H IN G T V / C H A N N EL C O N TR O L 38 ALARM CH VOL 1 2 34 5 67 8 0 9 P A G E TV TIMER INPUT PORTAL MUTE ENTER FLASHBK MENU CC INFO RETURN EXIT GUIDE EJECT RATIO SAP REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV.The remote control may...

39 W AT C H IN G T V / C H A N N EL C O N TR O L ꔛ Open the battery compartment cover on the back side and install the batteries matching correct polar-ity. ꔛ Install two 1.5V AAA batteries. Don’t mix old or used batteries with new ones. ꔛ Close cover. Installing Batteries VOLUME UP/DOWN Adjusts the...

WATCHING TV / CHANNEL CONTROL W AT C H IN G T V / C H A N N EL C O N TR O L 40 TURNING ON THE TV CHANNEL SELECTION VOLUME ADJUSTMENT Adjust the volume to suit your personal preference. 1 First, connect power cord correctly. At this moment, the TV switches to standby mode. ꔛ In standby mode to turn T...

41 W AT C H IN G T V / C H A N N EL C O N TR O L ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. 1 MENU Display each menu. 2 ENTER Select a menu item. 3 ENTER Accept the current selection. 4 EXIT Return to TV viewing. CHANNEL OPTION PIC...

43 W AT C H IN G T V / C H A N N EL C O N TR O L CUSTOMER SUPPORT Picture Test / Sound Test This function is a customer support function that can execute picture and sound tests. □ Picture Test ꔑ Sound Test □ Product/Service Info. Close No Yes Do you have a sound problem in this screen? ? 1 MENU Sel...

WATCHING TV / CHANNEL CONTROL W AT C H IN G T V / C H A N N EL C O N TR O L 44 Product/Service Info. □ Picture Test □ Sound Test ꔑ Product/Service Info. Close This function shows support and product information.Customer Service Center can differ by country. 1 MENU Select Customer Support . 2 ENTER S...

45 W AT C H IN G T V / C H A N N EL C O N TR O L CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run this function if you change your residence or move the TV. Auto Tuning memorizes only ...

WATCHING TV / CHANNEL CONTROL W AT C H IN G T V / C H A N N EL C O N TR O L 46 Add/Delete Channel (Manual Tuning) When selecting DTV or Cable DTV input signal in Manual Tuning , you can view the on-screen signal strength monitor to see the quality of the signal being received. 1 MENU Select CHANNEL ...

47 W AT C H IN G T V / C H A N N EL C O N TR O L Channel Editing The channels in the Channel Edit List are displayed in black and the channels deleted from the Channel Edit List are displayed in blue.When a channel number is deleted, it means that you will be unable to select it using CH ∧∨ button d...

WATCHING TV / CHANNEL CONTROL W AT C H IN G T V / C H A N N EL C O N TR O L 48 INPUT LIST Only these input signals which are connected to a TV can be activated and selected. 1 INPUT ENTER Select the desired input source. Input List ꔂ Move ꔉ Enter TV AV 1 AV 2 Component RGB-PC HDMI1 HDMI2 USB � Exit ...

49 W AT C H IN G T V / C H A N N EL C O N TR O L EXAMPLE ELECTRONIC PROGRAM GUIDE This is an example of a typical TV electronic program guide showing available programming. On The Political Scene Kids Movies Top Fashions World Events Today Channel 01:30 AM 2:30 AM 2:45 AM 3:00 AM Kids ... Kids ... K...

WATCHING TV / CHANNEL CONTROL W AT C H IN G T V / C H A N N EL C O N TR O L 50 CHANNEL LABEL Choose preset labels for your channels.If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a channel even if you didn’t preset a label for the channel...

51 W AT C H IN G T V / C H A N N EL C O N TR O L DEMO MODE Displays a slide show to explain the various feature of this TV. 1 MENU Select OPTION . 2 ENTER Select Demo Mode . 3 ENTER Select On to show the various feature of the TV. 4 EXIT Return to TV viewing.After a while, Demo Mode . starts. If you...

MY MEDIA M Y M ED IA 52 CONNECTION METHOD MY MEDIA USB Connection ConnecttheUSBdevicetothe USB IN jackonthesideofTV. 1 USB IN I N 3 H/P Memory Key or

53 M Y M ED IA Precautions when using the USB device ► OnlyaUSBstoragedeviceisrecognizable. ► ConnectingaUSBstoragedevicethroughaUSBhubisnotsupported. ► AUSBstoragedevicewhichusesitsowndrivermaynotberecognized. ► TherecognitionspeedofaUSBstoragedevicemaydependoneachdevice. ► PleasedonotturnofftheTVo...

MY MEDIA M Y M ED IA 54 ENTRY MODE The My Media menu will open automatically when you insert a USB drive. My Media can also be accessed by choosing My Media in the user menu.On USB device, you can not add a new folder or delete the existing folder. ꔛ This TV can view JPG image files or playMP3audiof...

55 M Y M ED IA TheOn-ScreenDisplayonyourmodelmaybeslightlydifferent. PHOTO LIST Screen Components Supported photo file: *.JPG ꔛ Baseline:64pixel(width)x64pixel(height)to15360pixel(width)x8640pixel(height) ꔛ Progressive:64pixel(width)x64pixel(height)to1920pixel(width)x1440pixel(height) ꔛ YoucanplayJP...

MY MEDIA M Y M ED IA 56 Photo Selection ꔛ Usethe CH ( ꕌꕍ ) buttontonavigate inthephotopage. ꔛ When one or more photos aremarked, you can view individualphotosoraslideshowofthemarkedphotos.Ifnophotosaremarked,youcan view all photos individually or allphotosinthefolderinaslideshow. Mark Mode View Mark...

57 M Y M ED IA Full Screen Menu Moreoperationsareavailableinfullscreenmode. Theaspectratioofaphotomaychangethesize ofthephotodisplayedonthescreeninfullsize. 1 Selectthetargetfolderordrive. 2 ENTER Selectthedesiredphotos. 3 ENTER Theselectedphotoisdisplayedinfullsize. ꔛ Usethe CH ( ꕌꕍ ) buttontonavig...

59 M Y M ED IA Using the Photo List Function ! ? ! ? NOTE ► OptionvalueschangedinPhotoListdonotaffectMusicList. Set Photo View Menu Options Set Photo View. Slide Speed ◀ Fast ▶ BGM Drive1 • Repeat ◀ On ▶ • Random ◀ Off ▶ � Previous 1 ENTER Showthe Option menu. 2 ENTER Select Set Photo View , Set Vid...

MY MEDIA M Y M ED IA 60 Set Video Menu Options Set Audio Menu Options Set Audio. Sound Mode ◀ Standard ▶ Auto Volume ◀ Off ▶ Clear Voice II ◀ Off ▶ Balance 0 ◀ ▶ � Previous L R 1 Select Picture Mode . 2 Makeappropriateadjustments. 1 Select Sound Mode , Auto Volume , Clear Voice II ,or Balance . 2 Ma...

61 M Y M ED IA MUSIC LIST ThisTVcannotplaybackcopy-protectedfiles.TheOn-ScreenDisplayonyourmodelmaybeslightlydifferent. MUSIC(*.MP3)supportingfileBitrate32Kbps-320Kbps•SamplingrateMPEG1Layer3:32kHz,44.1kHz,48kHz•SamplingrateMPEG2Layer3:16kHz,22.05kHz,24kHz•SamplingrateMPEG2.5Layer3:8kHz,11.025kHz,12...

MY MEDIA M Y M ED IA 62 Music Selection ꔛ Usethe CH ( ꕌꕍ ) buttontonavigate inthemusicpage. ꔛ When one or more music files aremarked, the marked music files willbeplayedinsequence. Mark Mode 1 Selectthetargetfolderordrive. 2 ENTER Selectthedesiredmusicfile. 3 ENTER Musicfilesareplayed. Page 1/1 Musi...

63 M Y M ED IA Using the Music List Function Page 1/1 Music List Page 1/1 � 02:30 / 03:25 002. - B02.mp3 �� � � � � � Play with Photo Option Hide Exit 3 file(s) Marked 001. - B01.mp300:00 002. - B02.mp300:00 003. - B03.mp300:00 004. - B04 .mp300:00 005. - B05 .mp300:00 � � � � Choose options. Set Au...

65 M Y M ED IA ! ? ! ? NOTE ► Music files with copy-protection will not play. ► Press ENTER or � button to stop the screen saver. ꔛ If you don't press any buttons for a while, the play information box will float across the screen. This prevents screen pixel damage due to a fixed image remaining on t...

PICTURE CONTROL P IC TU R E C O N TR O L 66 PICTURE SIZE (ASPECT RATIO) CONTROL PICTURE CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. You can select a different aspect ratio depending on input source (analog broadcasting, digital broa...

P IC TU R E C O N TR O L 67 16:9 Adjust the picture horizontally, in a linear proportion to fill the entire screen. Just Scan Normally the edges of video signals are cropped 1-2%. Just Scan turns off this cropping and shows the complete video. Notes: If there is noise on the edges of the original si...

P IC TU R E C O N TR O L 69 MANUAL PICTURE ADJUSTMENT - USER MODE Adjust the picture appearance to suit your preference and viewing situations. 1 MENU Select PICTURE . 2 ENTER Select Picture Mode . 3 ENTER Select Vivid , Standard , Cinema , Sport , or Game . 4 ENTER Select Backlight , Contrast , Bri...

PICTURE CONTROL P IC TU R E C O N TR O L 70 PICTURE IMPROVEMENT TECHNOLOGY (ADVANCED CONTROL) Advanced Control allows you to adjust some of the advanced features of your LG display.To reset to the factory default after making adjustments to each input source, execute the Picture Reset function for e...

PICTURE CONTROL P IC TU R E C O N TR O L 72 xvYCC ꔛ This is produces richer colors. ꔛ This feature represents rich color as much as conventional video signal. ꔛ This function is enabled in " Picture Mode - Cinema , Expert " when a xvYCC signal is inputted through HDMI.

P IC TU R E C O N TR O L 73 PICTURE RESET 1 MENU Select PICTURE . 2 ENTER Select Picture Reset . 3 ENTER Select Yes . 4 ENTER Initialize the adjusted value. EXIT Return to TV viewing. PICTURE � Move � Enter ꔀ � • Tint 0 • Color Temp. 0 • Advanced Control • Picture Reset • Screen (RGB-PC) R G W C PIC...

S O U N D & L A N G U A G E C O N TR O L 74 SOUND & LANGUAGE CONTROL AUTO VOLUME Auto Volume makes sure that the volume level remains consistent whether you are watching a com-mercial or a regular TV program. Because each broadcasting station has its own signal conditions, volume adjustment ...

S O U N D & L A N G U A G E C O N TR O L 75 CLEAR VOICE II By differentiating the human sound range from others, it improves the sound quality of voices. 1 MENU Select AUDIO . 2 ENTER Select Clear Voice II . 3 ENTER Select On or Off . 4 Select Level . 5 Make appropriate adjustments. Adjustment f...

SOUND & LANGUAGE CONTROL S O U N D & L A N G U A G E C O N TR O L 76 BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. 1 MENU Select AUDIO . 2 ENTER Select Balance . 3 ENTER Make appropriate adjustments. AUDIO � Move � Enter AUDIO � Move � Enter • Auto Vo...

SOUND & LANGUAGE CONTROL S O U N D & L A N G U A G E C O N TR O L 78 SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. 1 MENU Select AUDIO . 2 ENTER Select Sound Mode . 3 ENTER Select Standard , Music , Cinema , Sport , or Game . 4 ENTER Select Inf...

S O U N D & L A N G U A G E C O N TR O L 79 AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO � Move � Enter AUDIO � Move � Enter • Balance 0 • Sound Mode : Standard • Infinite Sound :Off • Treble 50 • Bass 50 • Reset • TV Speaker : On L R L R ꔀ � • Ba...

SOUND & LANGUAGE CONTROL S O U N D & L A N G U A G E C O N TR O L 80 AUDIO LANGUAGE This feature operates only in DTV/Cable DTV mode. 1 MENU Select OPTION . 2 ENTER Select Language . 3 ENTER Select Audio Language . 4 Select your desired language. OPTION � Move � Enter OPTION � Move � Enter •...

S O U N D & L A N G U A G E C O N TR O L 81 ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. 1 MENU Select OPTION . 2 ENTER Select Language . 3 ENTER Select Menu Language . 4 Select your desired language.From this point on, the on-screen menus wil...

SOUND & LANGUAGE CONTROL S O U N D & L A N G U A G E C O N TR O L 82 CAPTION MODE Captions are provided to help the hearing impaired watch TV. Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the scre...

S O U N D & L A N G U A G E C O N TR O L 83 Digital Broadcasting System Captions Choose the language you want the DTV/Cable DTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program.This function in only available when Caption Mode is s...

SOUND & LANGUAGE CONTROL S O U N D & L A N G U A G E C O N TR O L 84 Caption Option Customize the DTV/Cable DTV captions that appear on your screen.This function in only available when Caption Mode is set On . 1 MENU Select OPTION . 2 ENTER Select Caption . 3 ENTER Select On . 4 Select Digit...

85 TIM E S ET TIN G CLOCK SETTING TIME SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting sta-tion.Set the clock manually if the current time is set incorrectly by the...

TIME SETTING TIM E S ET TIN G 86 Manual Clock Setup If the current time setting is wrong, reset the clock manually. 1 MENU Select TIME . 2 ENTER Select Clock . 3 ENTER Select Manual . 4 Select the Year, Month, Date, Hour, or Minute option. 5 Set the Year, Month, Date, Hour, or Minute option. TIME TI...

87 TIM E S ET TIN G AUTO ON/OFF TIME SETTING This function operates only if the current time has been set.The Off Time function overrides the On Time function if they are both set to the same time. The TV must be in standby mode for the On Time to work. 1 MENU Select TIME . 2 ENTER Select Off Time o...

TIME SETTING TIM E S ET TIN G 88 SLEEP TIMER SETTING The Sleep Timer turns the TV off at the preset time.Note that this setting is cleared when the TV is turned off. 1 MENU Select TIME . 2 ENTER Select Sleep Timer . 3 ENTER Make appropriate adjustments. ꔛ To cancel the Sleep Timer , select Off . TIM...

89 PA R EN TA L C O N TR O L / R AT IN G PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default s...

PARENTAL CONTROL / RATINGS PA R EN TA L C O N TR O L / R AT IN G 90 Change the password by inputting a new password twice. Set Password 1 MENU ENTER Select LOCK . 2 1 2 34 5 0 6 7 8 9 Input the password. 3 Select Set Password . 4 ENTER 1 2 34 5 0 6 7 8 9 Choose any 4 digits for your new password.As ...

91 PA R EN TA L C O N TR O L / R AT IN G Enables or disables the blocking scheme you set up previously. Lock System 1 MENU ENTER Select LOCK . 2 1 2 34 5 0 6 7 8 9 Input the password. 3 Select Lock System . 4 ENTER Select On or Off . ꔛ When you select On , the Lock System is enable. LOCK LOCK � Move...

PARENTAL CONTROL / RATINGS PA R EN TA L C O N TR O L / R AT IN G 92 CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. ꔛ If a channel is locked, enter the password to unlock it temporarily. 1 MENU ENTER Select LOCK . 2 1 2 34 5 0 6 7 8 ...

PARENTAL CONTROL / RATINGS PA R EN TA L C O N TR O L / R AT IN G 94 TV Rating Children Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature...

95 PA R EN TA L C O N TR O L / R AT IN G TV Rating General Based on the ratings, blocks certain TV programs that you and your family do not want to view. ꔛ Age (applies to TV-G,TV-PG,TV- 14,TV-MA). ꔛ Dialogue -sexual dialogue (applies to TV-PG,TV-14). ꔛ Language -adult language (applies to TV-PG, TV...

PARENTAL CONTROL / RATINGS PA R EN TA L C O N TR O L / R AT IN G 96 DOWNLOADABLE RATING This function is available only for digital channels.This function operates only when TV has received Region5 Rating data. ꔛ If a Downloadable rating is locked, enter the password to unlock it tem-porarily. 1 MEN...

97 PA R EN TA L C O N TR O L / R AT IN G EXTERNAL INPUT BLOCKING Enables you to block an input. 1 MENU ENTER Select LOCK . 2 1 2 34 5 0 6 7 8 9 Input the password. 3 Select Input Block . 4 ENTER Select input source. 5 Select On or Off . LOCK LOCK � Move � Enter � Move � Enter • Block Channel • Movie...

98 APPENDIX A P P EN D IX APPENDIX Abnormal Operation The remote control doesn’t work ꔛ Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ꔛ Ensure that the batteries are installed with co...

99 A P P EN D IX PC Mode Problems The signal is out of range ꔛ Adjust resolution, horizontal frequency, or vertical frequency on the PC. ꔛ Check the input source. Vertical bar or stripe on background & Horizontal Noise & Incorrect position ꔛ Activate the Auto configure feature or adjust size...

100 APPENDIX A P P EN D IX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here’s a great way to ...

101 A P P EN D IX PRODUCT SPECIFICATIONS Power Requirement AC 100-240 V ~ 50 / 60 Hz Television System NTSC-M, ATSC, 64 & 256 QAM Program Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 External Antenna Impedance 75 Ω Environment condition Operating Temperature 0 °C to 40 °C (32 ...

102 APPENDIX A P P EN D IX Code (Hexa) Function Note Code (Hexa) Function Note 00 CH ꕌ Remote Control Button B0 ꕖ Remote Control Button 01 CH ꕍ Remote Control Button B1 ꕗ Remote Control Button 02 VOL + Remote Control Button BA ꕘ Remote Control Button 03 VOL - Remote Control Button D6 TV Discrete IR ...

103 A P P EN D IX OPEN SOURCE LICENSE Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim cop- ies of this license document, but changing it is not allowed. Preamble The licenses for...

107 A P P EN D IX Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim cop- ies of this license document, but changing it is not allowed. [This is the first released version of the Les...

112 APPENDIX A P P EN D IX 1.Definitions. 1.0.1. “Commercial use” means distribution or otherwise making the covered code available to a third party. 1.1. “Contributor” means each entity that creates or con- tributes to the creation of modifications. 1.2. “Contributor version” means the combination ...

OWNER’S MANUAL LCD TV Please read this manual carefully before operating your set and retain it for future reference. P/NO : SAC34026009 (1104-REV03) www.lg.com The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. MODEL SE...

Commercial Mode Setup pages 12 – 13 Cloning Information pages 27 – 32 b -LAN™ Setup & Overview page 39 EXPERIENCED INSTALLER Commercial Mode Setup Guide Note: Selected features shown in this guide may not be available on all models. Lodging Guest Interactive Pro:Centric™ TVs © Copyright 2011, LG...

5 206-4163 Table of Contents Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Important Safety Instructions . . . . . . . . . . . . . . . . . . . 3 – 4Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Setup Checklist / Overview . . . . . . ....

6 206-4163 Installation and Setup Checklist __ Unpack TV and all accessories. __ Install batteries in remote control. __ Install TV on VESA mount or stand. Note: It may be advisable to make all cable connections before installing on VESA mount or stand, as appropriate. Hardware Connections __ Instal...

7 206-4163 Important: Pro:Centric operation requires that Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL be set appropriately and that the TV be in PPV or FTG Mode. The interactive Pro:Centric TV enables guests—from the comfort of their hotel rooms—to view and select from a complete listi...

9 206-4163 Side Connections Panel / RF Antenna & MPI Connections AV IN 2 L/MONO -A UDIO - R VIDEO USB IN USB IN Insert USB memory device for software updates, cloning pur- poses, or picture/music enter- tainment, as applicable. Antenna or CATV ANTENNA IN MP I RF Antenna & MPI Connections (32...

10 206-4163 Installer Overview This is the Commercial Mode Setup Guide only. Installer Menu / Commercial Mode Setup To set up a Master TV, you will need to know how to enter the TV Installer Menu and make changes to the default values as required. Similarly, to configure a single TV’s Installer Menu...

11 206-4163 Installer Remote Control Typical Key Functions MENU MUTE VOL CH P A G E RETURN INPUT TV ALARM TIMER 1 2 34 5 6 7 8 0 9 FLASHBK PORTAL ENTER GUIDE EXIT INFO EJECT SAP RATIO CC i NUMBER Buttons (0 - 9) DASH Use to enter a program number or channel. Dash is used for sub-channel numbers such...

12 206-4163 Commercial Mode Setup for Master TV XXLD320H PTC INSTALLER MENU 000 INSTALLER SEQ 000 UPN 000-000-000-000 FPGA E0F1 PTC V1.00.000 CPU V3.06.00 117 FACT DEFAULT 001 003 BAND/AFC 00X Typical TV Installer Menu Note: The Installer Menu header will vary depending on the TV you are setting up....

13 206-4163 028 CH. OVERIDE 000 After verifying the TV Setup, set Installer Menu item 028 CH. OVERIDE to 000.* Commercial Mode Setup for Master TV (Cont.) DIGITAL 19-3 WXYZ MONO STEREO SAP Custom Text Label “WXYZ” created in 2-5-4 + MENU (Add Channel Label) Mode. (Continued from previous page) 3. Ru...

14 206-4163 Installer Menu Typical TV Installer Menu XXLD320H PTC INSTALLER MENU 000 INSTALLER SEQ 000 UPN 000-000-000-000 FPGA E0F1 PTC V1.00.000 CPU V3.06.00 Use the Installer Menu to set up or change operational settings. Refer to the table starting on the next page for brief descriptions of Inst...

17 206-4163 Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INSTALLER SEQUENCE Speci es entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 001 - POWER MANAGE (Power Management) Determines hours of no activity before automatic shutoff. The Power Manag...

21 206-4163 TV Setup Menus Overview On-screen setup menus control the features of the TV. Press MENU on the Installer Remote to access the TV setup menus, and set the TV features to the desired configuration for the end user. CHANNEL PICTURE AUDIO INPUT OPTION LOCK TIME MY MEDIA Refer to the Owner’s...

22 206-4163 Adding Channel Label Icons / Custom Channel Labels(2-5-4 + MENU Mode) Changing a Channel’s Icon on the Master TV 1. Use Channel Up/Down to select the channel for which to change the icon. 2. Use the Left/Right arrow keys to select the thin letter “ I ” on the Channel ID display. 3. Use t...

23 206-4163 FTG Mode of Operation FTG Con fi guration Overview Laptop PC UPDATE RESET AUDIO IN (RGB/DVI) RS-232C IN (SERVICE ONLY) . . . . . . . . . . . . . . . . . . . 2 1 HDMI /DVI IN RJP VIDEO L/MONO -AUDIO- R AV IN 1 RGB IN (PC) . . . . . . . . . . . . . . . TV-LINK CFG GAME CONTROL . . . . . . ...

24 206-4163 CHANNEL PICTURE AUDIO INPUT OPTION LOCK TIME MY MEDIA TV Setup Menus Shows that the EBL is in Pass-through Mode . Function Menu Shows that the EBL is in FTG Mode . While this menu is present on-screen, Installer Menu settings can ONLY be accessed/changed using the FTG Configuration Appli...

27 206-4163 Installer Menu Installer Menu item settings Channel Auto Tuning (Channel Lineup) Manual Tuning Channel Edit Channel Label Picture Aspect Ratio Picture Mode Advanced Control Audio Auto Volume Clear Voice Sound Mode Balance TV Speaker Option Menu Language Audio Language Caption Caption Mod...

28 206-4163 Cloning Procedures Learning / Teaching a Master TV Setup using a USB Memory Device Learn Setup from Master TV 1. Ensure the Master TV is set up completely and the EBL is in Pass-through Mode. 2. Plug the USB memory device into the USB IN port on the Master TV.3. Press MENU to display the...

33 206-4163 Remote Jack Pack Setup RJP Available? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093 RJP AVAILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP AVAILABLE to 001). See Installer Menu detailed descriptions for further informati...

34 206-4163 XXLD320H PTC INSTALLER MENU 000 INSTALLER SEQ 000 UPN 000-000-000-000 FPGA E0F1 PTC V1.00.000 CPU V3.06.00 Reference: Upgrading TV/PTC Software using a USB Memory Device Upgrading TV/PTC Software Before you begin, note that the software upgrade les must be stored in a folder named “LG_DT...

35 206-4163 Reference: Downloading a Splash Screen using a USB Memory Device Splash Screen Image File Guidelines • The splash screen image must be a baseline (not progressive) JPEG.• The image should be no larger than 1 MB.• The ideal size for the image is 1366 x 768 pixels or under.• The image le m...

36 206-4163 Reference: Power Consumption Settings The following tables assume that Installer Menu item 118 POWER SAVINGS is set to 003 (default) and Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 100). Item 099 Back Lighting (Static) 26LD320H 32LD320H / 32LD325H 37LD32...

37 206-4163 Reference: TV Camport Auto Sense Operation The Camport Auto Sense function is enabled when: 1. Installer Menu item 034 CAMPORT EN is set to 1 AND 2. Installer Menu item 040 AUTO CAMPORT is enabled (1). Selectable : Can be accessed with INPUT key, direct access, etc. Auto Sense : TV switc...

38 206-4163 Reference: TV Aux Input Configuration DIRECT ACCESS Tuning TV ENABLE MPI DATA START AUX SOURCE ASSIGN- MENT Installer Menu MPI DATA STATUS TYPE 0x41 SOURCES ENABLED (R/W) DATA STATUS TYPE 0xD2 CURRENT AV SOURCE (R) DATA STATUS TYPE 0x0D AUX SOURCE (R) OLD_ OCV = 0 OLD_ OCV = 1 Source Inp...

40 206-4163 Reference: RJP Model List and Input Auto-sensing Hierarchy RJP Model List Legacy Models Scaler Models RJP-101M N/A RJP-101ML N/A RJP-110F RJP-210F RJP-110FW RJP-210FW RJP-110W RJP-210W RJP-110WBR RJP-210WBR RJP-110S RJP-210S RJP-120G RJP-220G RJP-120T RJP-220T RJP-201B RJP-301B RJP-202B ...

41 206-4163 Troubleshooting General Troubleshooting Some Quick and Easy Tips for Resolving Problems Software Problems Cannot direct enter channel number or “No Signal” appears. Channel not included in channel lineup in TV controller. After 2-5-5 + MENU, only channels included in TV controller will a...

42 206-4163 Controller Quick Check STATUS LED on PTC Board blinking? Plug into AC Power outlet. TV connected to AC Power? Bad TV Yes No No Yes Cycle the power by removing and reconnecting the AC Power cord. Then, observe POWER LED on front of TV. POWER LED lit? No Yes Press POWER on Installer Remote...

43 206-4163 Troubleshooting (Cont.) Commercial Mode Check / FTG Operation Troubleshooting Press POWER on Installer Remote. TV responded? Bad TV Yes No TV stopped responding or continued to respond? TV is in Commercial Mode. Stopped responding TV is not in Commercial Mode. Call Technical Support for ...

44 206-4163 Warning: Do not connect a clone programmer to a PPV card installed in the Master or Target TVs. Also, if the TV is in LodgeNet PPV Mode (check with the site administrator if you are not certain), do not connect a clone programmer to the GAME CONTROL/MPI port. Either of these actions will...

45 206-4163 75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider. The end looks like a hex-shaped nut with a wire through the middle. It screws onto the Antenna/Cable threaded jack on the back of the TV. 300 TO 75 OHM ADAPTER A small device that connects a 2-wire 300...

46 206-4163 Document Revision History / Notes Notes Document Revision History Date Description December 2010 Revision A: New Document January 2011 Revision B: Includes LD325H TVs Product documentation is available online at: www.LGsolutions.com/products . From the Products page, select TVs, Systems ...

6 206-4177 Installation and Setup Checklist __ Unpack TV and all accessories. __ Install batteries in remote control. __ Install TV on VESA mount or stand. Note: It may be advisable to make all cable connections before installing on VESA mount or stand, as appropriate. Hardware Connections __ Instal...

8 206-4177 UPDATE RESET AUDIO IN (RGB/DVI) RS-232C IN (SERVICE ONLY) . . . . . . . . . . . . . . . . . . . 2 1 HDMI /DVI IN VIDEO L/MONO -AUDIO- R AV IN 1 RGB IN (PC) . . . . . . . . . . . . . . . . . . . . . . . . . REMOTE CONTROL OUT SPEAKER OUT 8 HDMI COMPONENT IN R L P B Y P R VIDEO AUDIO ( ) LD...

29 206-4177 CHANNEL PICTURE AUDIO INPUT OPTION LOCK TIME MY MEDIA TV Setup Menus Shows that the TV is in Pass-through Mode . Function Menu Shows that the TV is in FTG Mode . While this menu is present on-screen, Installer Menu settings can ONLY be changed using the FTG Configuration Application to u...

31 206-4177 FTG Mode of Operation (Cont.) Teaching FMA Con fi guration to a TV / Learning an FMA Con fi guration File from a TV Teaching FMA Configuration to a TV 1. Plug the USB memory device that contains the FMA Con guration le into the Target LD310H TV USB IN port. 2. Press MENU to display the T...

33 206-4177 The FTG Channel Map Configuration Utility enables you to build a Channel Map with logical channel numbers. Note: Write, Read, and Learn functions in the FTG Channel Map Configuration Utility are used for local FTG configuration of TVs that support a direct connection to a PC. These funct...

34 206-4177 FTG Mode of Operation (Cont.) FTG Channel Map Editor Overview DELETE Click to remove highlighted channel from FTG Channel Map. ADD After defining a new Logical Channel, click to add channel to the FTG Channel Map. The FTG Channel Map Editor shows a single Logical Channel’s Data and the F...

36 206-4177 Note: The data referenced in the FMA Con fi guration List is only a snap- shot of the current FTG Channel Map and FTG Installer Menu settings when copied to the list. If you make any change(s) to the current data to be included in the FMA Con fi guration List, you will need to recopy Cha...

9 206-4186 Side Connections Panel / RF Antenna Connection AV IN 2 L/MONO -A UDIO - R VIDEO USB IN USB IN Insert USB memory device for software updates, cloning purposes, or picture/music entertainment, as applicable. Antenna or CATV ANTENNA IN RF Antenna Connection (32/37/42LD340H and 32/37/42LD345H...

22 206-4186 Adding Channel Icons / Custom Channel Labels (2-5-4 + MENU Mode) Changing a Channel’s Icon on the Master TV 1. Use Channel Up/Down to select the desired channel. 2. Use the Left/Right arrow keys to select the thin letter “ I ” on the Channel ID display. 3. Use the Up/Down arrow keys to s...

29 206-4186 FTG Mode of Operation Overview FTG Mode via CPU or EBL FTG Mode enables Pro:Idiom decryption and also allows logical channel mapping of physical channels. There are two separate and distinct methods for configuring LD340H/LD345H TVs for FTG Mode of operation: one (new) method is to confi...

30 206-4186 FTG Mode of Operation Overview (Cont.) CHANNEL PICTURE AUDIO INPUT OPTION LOCK TIME MY MEDIA TV Setup Menus Shows that the TV is in Pass-through Mode . Function Menu Indicates the TV (CPU or EBL) is in FTG Mode . While the TV is in FTG Mode, Installer Menu settings can be accessed as rea...

31 206-4186 FTG Mode via CPU Creating an FMA Configuration File using the FTG Configuration Application This section describes how to create an FMA Configuration file that can be saved to a USB memory device. In order to enable Pro:Idiom decryption, it is recommended that you create an FMA Configura...

32 206-4186 FTG Mode via CPU (Cont.) Caution: If the TV EBL is already in FTG Mode, you cannot use this procedure to make changes to the FTG Channel Map and FTG Installer Menu settings. You must use a direct PC-to-TV connection as described on page 35 or an FMA head end device to reconfigure the EBL...

34 206-4186 FTG Mode via CPU (Cont.) Typical TV Installer Menu Note: The Installer Menu header will vary depending on the TV you are setting up. Run Auto Tuning and edit the channel lineup, as necessary. Adjust the settings for these Installer Menu items. 117 FACT DEFAULT 001 003 BAND/AFC 00X xxLD34...

35 206-4186 Laptop PC UPDATE RESET AUDIO IN (RGB/DVI) RS-232C IN (SERVICE ONLY) . . . . . . . . . .......... 2 1 HDMI /DVI IN RJP VIDEO L/MONO -AUDIO- R AV IN 1 RGB IN (PC) . . . . . . . . . . . . . . . TV-LINK CFG GAME CONTROL/ MPI .......... REMOTE CONTROL OUT SPEAKER OUT HDMI COMPONENT IN R L P B...

36 206-4186 FTG Channel Map Configuration Utility The FTG Channel Map Configuration Utility enables you to build a Channel Map with logical channel numbers. Note: Write, Read, and Learn functions in the FTG Channel Map Configuration Utility are used for direct PC-to-TV FTG configuration of LD340H/LD...

37 206-4186 FTG Configuration Application Utilities Overview (Cont.) DELETE Click to remove highlighted channel from FTG Channel Map. ADD After defining a new Logical Channel, click to add channel to the FTG Channel Map. FTG Channel Map Editor The FTG Channel Map Editor shows a single Logical Channe...

38 206-4186 FTG Configuration Application Utilities Overview (Cont.) CONFIGURATION SETTINGS Select tabs for categories of Installer Menu items to set up TV. HOSPITAL-GRADE TV ONLY Set Hospital items on Installer Menu for hospital-grade TVs. FTG Installer Menu Configuration Utility Note: Write, Read,...

39 206-4186 Note: The data referenced in the FMA Configuration List is only a snap- shot of the current FTG Channel Map and FTG Installer Menu settings when copied to the list. If you make any change(s) to the current data to be included in the FMA Configuration List, you will need to recopy Channel...

48 206-4186 This section describes how you can reset a TV that is currently in FTG Mode to Pass-through Mode. Note that the reset to Pass-through Mode will also restore all factory default settings on the TV. FTG Mode via CPU There are three options for resetting Pass-through Mode on TVs that are in...

52 206-4186 Warning: Do not connect a clone programmer to a PPV card installed in the Master or Target TVs. Also, if the TV is in LodgeNet PPV Mode (check with the site administrator if you are not certain), do not connect a clone programmer to the GAME CONTROL/MPI port. Either of these actions will...

53 206-4186 75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider. The end looks like a hex-shaped nut with a wire through the middle. It screws onto the Antenna/Cable threaded jack on the back of the TV. 300 TO 75 OHM ADAPTER A small device that connects a 2-wire 300...

54 206-4186 Document Revision History / Notes Notes Document Revision History Date Description May 2011 Revision A: New document Product documentation is available online at: www.LGsolutions.com/products . From the Products page, select TVs, Systems & Solutions , then LCD TVs , then the applicab...