Page 2 - ENG; ENGLISH; IMPORTANT SAFETY INSTRUCTIONS; WARNING; Wash hands after handling.
2 ENG ENGLISH IMPORTANT SAFETY INSTRUCTIONS WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning ...
Page 3 - Warning; - To reduce the risk of fire or
3 ENG ENGLISH IMPORTANT SAFETY INSTRUCTIONS y y Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Short-circuit Breaker Power Supply y y Only use attachments/accessories specified by the manufactur...
Page 4 - Keep the product away from direct sunlight.
4 ENG ENGLISH IMPORTANT SAFETY INSTRUCTIONS y y Grounding (Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding ...
Page 5 - Generated Sound; FCC NOTICE
5 ENG ENGLISH IMPORTANT SAFETY INSTRUCTIONS y y Generated Sound “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Ele...
Page 6 - LICENSES
6 ENG ENGLISH LICENSES / OPEN SOURCE SOFTWARE NOTICE LICENSES Supported licenses may differ by model. For more information about licenses, 'visit www.lg.com'. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and ...
Page 7 - TABLE OF CONTENTS; NOTE; Image shown may differ from your TV.
7 ENG ENGLISH TABLE OF CONTENTS TABLE OF CONTENTS 2 IMPORTANT SAFETY INSTRUCTIONS 6 LICENSES 6 OPEN SOURCE SOFTWARE NOTICE 7 TABLE OF CONTENTS 8 INSTALLATION PROCEDURE 8 ASSEMBLING AND PREPARING 8 Unpacking 11 Optional Extras 12 Parts and buttons 14 Setting up the TV 14 - Attaching the stand 17 - Mo...
Page 8 - INSTALLATION PROCEDURE; Open the package and make sure all the accessories are included.; ASSEMBLING AND PREPARING; Unpacking; CAUTION
8 ENG ENGLISH INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING INSTALLATION PROCEDURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. ASSEMBLING AND PREPARING Unpacking Check your product box for the fo...
Page 11 - Quick Reference Guide; Optional Extras; Wireless Dongle
11 ENG ENGLISH ASSEMBLING AND PREPARING (For LS460E series) Remote Control,Batteries (AAA) (See p.23) Quick Reference Guide EzSign 2.0 Editor CD Power Cord Stand Body, Stand Base (See p.16) Stand Screws 8 EA, M4 x 20(See p.16) Wall Mount Inner Spacers 4 EA(See p.19) Cable Holder (See p.21) FREEZE RA...
Page 12 - Do not insert LAN cable in the RJP INTERFACE.; Parts and buttons
12 ENG ENGLISH ASSEMBLING AND PREPARING USB IN IN 3 ANTENNA/ CABLE IN RJP INTERFACE AV IN VIDEO L/M ON O -AUDIO- R L R AUDIO IN (RGB/DVI) 1 2 / DVI IN EXTERNAL SPEAKER OUT RS-232C IN (CONTROL & SERVICE) RGB IN (PC) DC IN CAUTION y y Do not insert LAN cable in the RJP INTERFACE. Parts and buttons...
Page 14 - Setting up the TV; Attaching the stand; Front
14 ENG ENGLISH ASSEMBLING AND PREPARING Setting up the TV You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment centeror other furniture. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. 3 ...
Page 15 - Stand Body
15 ENG ENGLISH ASSEMBLING AND PREPARING (For 22/26LT560C) Front 1 3 2 CAUTION y y When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. M4 x 16 2 EA M4 x 12 4 EA (For 22LT560C) (For 26LT560C) Stand Body Stand B...
Page 16 - Do not fasten the screws with too much
16 ENG ENGLISH ASSEMBLING AND PREPARING M4 x 20 4 EA CAUTION y y Make sure that the screws are fastened completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) y y Do not fasten the screws with too much force; otherwise they may be worn out and get loos...
Page 17 - Mounting on a table; Lift and tilt the TV into its upright position on a; Securing the TV to a table
17 ENG ENGLISH ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm 10 cm (4 inches) 2 Connect the power cord to a wall outlet. CAUTION y y Do not p...
Page 18 - Attaching the TV to a desk; Mounting on a wall; Desk
18 ENG ENGLISH ASSEMBLING AND PREPARING 4-Screws (Not provided as parts of the product) Attaching the TV to a desk The TV should be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. (For 32/37/42LT560C, 32/37/42/47LT560E, 5...
Page 19 - Wall Mount Inner Spacer; On the
19 ENG ENGLISH ASSEMBLING AND PREPARING Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table. Model 22/26LT560C 32LT560C 32LT560E VESA 100 x 100 200 x 100 Standard screw M4 M4 Number of screws 4 4...
Page 20 - External speaker out; Connect the external speaker.; Insert and tighten the eye-bolts, or TV brackets
20 ENG ENGLISH ASSEMBLING AND PREPARING ANTENNA/ CABLE IN RJP INTERFACE AV IN VIDEO L/M ON O -AUDIO- R L R AUDIO IN (RGB/DVI) 1 2 / DVI IN EXTERNAL SPEAKER OUT RS-232C IN (CONTROL & SERVICE) RGB IN (PC) DC IN R + L - L+ R - External speaker out Connect the external speaker. (For 22/26/32/37/42LT...
Page 21 - Tidying cables; Install the power cord holder and power cord.
21 ENG ENGLISH ASSEMBLING AND PREPARING Tidying cables For 32/37/42LT560C, 32/37/42/47LT560E 1 Install the power cord holder and power cord. It will help prevent the power cable from being removed by accident. Power Cord Holder 2 Gather and bind the cables with the cable holder. Cable Holder For 22/...
Page 22 - REMOTE CONTROL; Making Connections; or; PC; YELLOW
22 ENG ENGLISH ASSEMBLING AND PREPARING REMOTE CONTROL Below is a description of the remote control. Your remote control may look slightly different.To install batteries, open the battery cover, insert batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the bat...
Page 23 - VOL
23 ENG ENGLISH REMOTE CONTROL REMOTE CONTROL Below is a description of the remote control. Your remote control may look slightly different.To install batteries, open the battery cover, insert batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover...
Page 25 - GENERAL TROUBLESHOOTING; Display Panel Picture; Picture Reception; CAUTION FOR USING EzSign 2.0
25 ENG ENGLISH GENERAL TROUBLESHOOTING / CAUTION FOR USING EzSign 2.0 GENERAL TROUBLESHOOTING Display Panel Picture Symptom Possible Cause(s) Possible Solution(s) No picture. y y Display panel is turned off. y y Turn TV ON. y y Power failure? y y Antenna/cable not connected. y y Connect antenna/cabl...
Page 26 - SPECIFICATIONS
26 ENG ENGLISH SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. Television System NTSC-M, ATSC, 64 & 256 QAM Program Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 External Antenna Impedance 75 Ω Enviro...
Page 28 - IR CODES
28 ENG ENGLISH IR CODES IR CODES (Depending on model) Code (Hexa) Function Note 08 (POWER) Remote control Button (Power On/Off) 0B INPUT Remote control Button 10-19 Number Key 0-9 Remote control Button 4C - (DASH) Remote control Button 1A FLASHBK Remote control Button 02 VOL + Remote control Button ...
Page 29 - EXTERNAL CONTROL DEVICE SETUP
29 ENG ENGLISH EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.Connect the serial port of the control devic...
Page 30 - RS-232C configurations; Set ID
30 ENG ENGLISH EXTERNAL CONTROL DEVICE SETUP RS-232C configurations 7-Wire Configuration (Serial female-female NULL modem cable) PC TV RXD 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DSR DSR 6 4 DTR RTS 7 8 CTS CTS 8 7 RTS D-Sub 9 D-Sub 9 3-Wire Configurations(Not standard) PC TV RXD 2 3 TXD TXD 3 2 RXD...
Page 31 - Communication Parameters; Communication code: ASCII code; Command reference list
31 ENG ENGLISH EXTERNAL CONTROL DEVICE SETUP Communication Parameters y y Baud rate: 9600 bps (UART) y y Data length: 8 bits y y Parity : None y y Stop bit: 1 bit y y Communication code: ASCII code y y Use a crossed (reverse) cable. Command reference list COMMAND1 COMMAND2 DATA (Hexadecimal) COMMAND...
Page 32 - Transmission / Receiving protocol; Transmission
32 ENG ENGLISH EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the set.(j, k, m or x)[Command 2] : Second command to control the set.[Set ID] : You can adjust the set ID to choose desired...
Page 39 - Congratulations on your purchase! As you enjoy your new product,; THE ISSUE
CHILD SAFETY: It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE y The home theater entertainment experience is a growing trend and larger flat panel displays are popula...
Page 40 - MODEL; LG Customer Information Center
The model and serial numbers of the TV are located on the back and/or one side of the TV. Record them below should you ever need service. MODEL SERIAL LG Customer Information Center For inquires or comments, visit www.lg.com or call: 1-888-865-30261-888-542-2623 USA, Commercial User CANADA Pro:Centr...