LevelOne WUA-0605 - Manuals

LevelOne WUA-0605 – Manual in PDF format online.

Manuals:

Manual

Manual LevelOne WUA-0605

Summary

Page 2 - Safety

2 Safety FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,...

Page 3 - Table of Contents

3 Table of Contents Welcome .......................................................................................................................................... 4 Package Contents .....................................................................................................................

Page 4 - Welcome; and offer fast speeds of up to 300 Mbps.; Package Contents; The Wireless USB Adapter package includes the following.

4 Welcome Thank you for purchasing the LevelOne WUA-0605 N_Max Wireless USB Adapter. The WUA-0605 is a 802.11n compliant Wireless Adapter which is designed to be both affordable, and offer fast speeds of up to 300 Mbps. It is designed for the Home and SOHO user who needs enhanced range and performan...

Page 5 - Wireless USB Adapter Overview; Interface; WPS Button: Press this button to do WPS with AP.

5 Wireless USB Adapter Overview Wireless USB Adapter has the USB interface, LED and WPS button below. Interface USB Interface: Connect the USB Interface to a USB port on your computer. LED Description The LED stays lighted to indicate WLAN link established and active. WPS Button WPS Button: Press th...

Page 6 - Wireless USB Adapter Installation; Utility

6 Wireless USB Adapter Installation The following instructions will guide you to through the process of installing the Wireless USB Adapter. Windows XP / Vista / 7 Setup Note: Screen captures shown in this guide are from Windows XP. Unless mentioned, there are no differences in Vista. 1. Insert the ...

Page 7 - Select your desired language, and then click “; Next; ” to start the installation.; “Next”

7 4. Select your desired language, and then click “ Next ” to start the installation. 5. Click “Next” to continue.

Page 8 - Click; “Install”; The WUA-0605 Driver and Utility is being installed.; “Install this driver software anyway.”

8 6. Click “Install” 7. The WUA-0605 Driver and Utility is being installed. In Windows Vista, the follow message may appear. Please click “Install this driver software anyway.”

Page 9 - Please click; “Finish”; and restart your computer.

9 8. Please click “Finish” and restart your computer. 9. After your computer has restarted, the WUA-0605 Utility icon will appear in your taskbar. Note: The red cross over the icon indicates the USB Adapter is not plugged in.

Page 10 - “Found New Hardware Wizard”; Device installation is now complete.

10 10. Now insert the Wireless USB Adapter into your com puter’s USB port. The “Found New Hardware Wizard” will appear. 11. Follow the prompts until you see that the WUA-0605 has been successfully installed. Windows XP Windows Vista 12. Device installation is now complete. You can now use the Utilit...

Page 11 - Making a Basic Wireless Network Connection; Double click the

11 Making a Basic Wireless Network Connection Step 1: Double click the LevelOne WUA-0605 Wireless LAN Utility on your Windows desktop. Step 2: Click the "Available Network" button to scan for available access points.

Page 12 - In the example, we want to connect to

12 Step 3: Double click on the SSID of Wireless access point or router that you are going to connect to. In the example, we want to connect to WBR-6800 .

Page 15 - Introduction to the Wireless LAN Utility; are not supported in Windows 98SE or Windows ME.; Checkboxes; To disable or enable the wireless adapter.

15 Introduction to the Wireless LAN Utility Note: These instructions uses Windows XP as the presumed operation system. Some functions are not supported in Windows 98SE or Windows ME. Double click the LevelOne WUA-0605 Wireless LAN Utility on your Windows desktop to start the Utility When the utility...

Page 16 - General

16 General After starting the utility, the general page pops up This General tab provides the information of your current wireless network connection. Functions Status Check if the device associated to target network. Speed The current connection speed Type Infrastructure or Ad-Hoc mode. Encryption ...

Page 17 - Profile

17 Profile The Profile tab lists the preferred connections. You can click the buttons beside to do configure each connection. Functions Add To add a connection profile. Remove To remove a connection profile. Edit To modify the configurations for a profile. Duplicate To make a copy of a profile. Set ...

Page 18 - This; Available Network; tab lists the reachable wireless network.; Functions; To rescan available Wireless Networks.; Add to Profile; To add an available Wireless Network to your profile list.

18 Available Network This Available Network tab lists the reachable wireless network. Functions Refresh To rescan available Wireless Networks. Add to Profile To add an available Wireless Network to your profile list.

Page 19 - The; Status; tab shows the current connection status.

19 Status The Status tab shows the current connection status.

Page 20 - Statistics; tab shows the transmission activity record. Clicking the

20 Statistics The Statistics tab shows the transmission activity record. Clicking the " Reset " button recounts the values from zero.

Page 21 - An easy and secure setup solution for Wi-Fi networks.

21 Wi-Fi Protected Setup (WPS) An easy and secure setup solution for Wi-Fi networks.

Page 22 - First press the WPS button on your Wireless Router / Access Point.

22 Push Button Config (PBC) Method If both the Wireless Router / Access Point and the Wireless USB Adapter has a physical button or software button for Push Button Config (PBC), please follow steps below to complete the WPS. Step 1: First press the WPS button on your Wireless Router / Access Point.

Page 23 - You can also push the physical button on the device.

23 Step 2: Click on "Push Button Config (PBC)" button. You can also push the physical button on the device.

Page 24 - The Utility will now pair the Router/AP and USB Adapter.

24 Step 4: The Utility will now pair the Router/AP and USB Adapter. When paired successfully, wireless encryption security will be applied to the connection.

Page 25 - WPS PIN Code Method; Check the PIN code assigned by the Wireless LAN Utility

25 WPS PIN Code Method You will need to set the same PIN code on both the Wireless Router / Access Point and the USB Adapter. Step 1: Check the PIN code assigned by the Wireless LAN Utility

Page 26 - Registrar; and use

26 Step 2: Enter your Router / Access Point’s Web Interface and set the WPS settings as Registrar and use the PIN code assigned in the Wireless LAN Utility. Screen Capture is from LevelOne Router Different models/brands will have varying configuration screens.

Page 27 - Select “Yes” if you want to select your Router / Access Point.

27 Step 3: Now press the “Pin Input Config (PIN)” Button. Step 4: Select “Yes” if you want to select your Router / Access Point.

Page 29 - Troubleshooting; Session Overlap; method or wait for a while and push the button again.; TimeOut; If you see the message below while doing WPS!! Please retry again!; Wireless LAN Utiliy appears twice; Please reboot your computer to fix this error.

29 Troubleshooting Session Overlap If there is more then one AP on the PBC mode, there will be [Session Overlap].Please using PIN method or wait for a while and push the button again. TimeOut If you see the message below while doing WPS!! Please retry again! Wireless LAN Utiliy appears twice The Wir...