LevelOne WBR-3405TX - Manuals

LevelOne WBR-3405TX – Manual in PDF format online.

Manuals:

Manual

Manual LevelOne WBR-3405TX

Summary

Page 2 - Contents

Contents 1. Overview................................................................................................................ 4 1.1 Product Feature ...................................................................................... 4 1.2 System Requirements....................................

Page 4 - Overview; System Requirements

1. Overview Congratulations on the purchase of your new LevelOne WBR-3405TX, 11g Wireless AP Router. The LevelOne 11g Wireless AP Router is a multi-function device. Before you install and use this product, please read this manual carefully for fully exploiting the functions of this product. 1.1 Prod...

Page 6 - Connect to the 11g Wireless Router; Access the Setting Menu

LEDs: LED Status Description On Indicates proper connection to power supply. Power OFF The unit is not receiving power Status On Indicates that the device is connected to the WLAN. Indicates connection to the WAN port WAN Blinking Data transmission. Link is established Blinking Packet transmit or re...

Page 8 - Wizard; ” button on the function menu. The; Next; You can change the password as you like and then click “; Next”

2.2.2 Quick Setup with Wizard Setup wizard is provided as the part of the web configuration utility. You can simply follow the step-by-step process to get your wireless router configuration ready to run in 6 easy steps by clicking on the “ Wizard ” button on the function menu. The following screen w...

Page 10 - Step 4: Set Internet connection

Step 4: Set Internet connection Select how the router will set up the Internet connection: Obtained IP automatically; Fixed IP address; PPPoE to obtain IP automatically; PPPoE with a fixed IP address; PPTP. Obtain IP automatically (DHCP client) : If you have enabled DHCP server, choose "Obtain I...

Page 11 - PPPoE to obtain IP automatically:

Page 12 - PPPoE with a fixed IP address:

Page 14 - ” to reboot the router. If you do not; exit; ” to quit without any changes. You also; Back

Step 5: Set Wireless LAN connection Click “enable” to enable wireless LAN. If you enable the wireless LAN, type the SSID in the text box and select a communications channel. The SSID and channel must be the same as wireless devices attempting communication to the router. Step 6: Restart The Setup wi...

Page 15 - Type the host name in the text box. The host name is required by some

3. Configuration 3.1 LAN Setting The screen enables you to configure the LAN & DHCP Server, set WAN parameters, create Administrator and User passwords, and set the local time, time zone, and dynamic DNS. 3.1.1 LAN & DHCP Server This page enables you to set LAN and DHCP properties, such as t...

Page 17 - Specify IP

Connection Type: Select the connection type, either DHCP client, Fixed IP or PPPoE from the drop-down list. WAN IP: Select whether you want to specify an IP address manually, or want DHCP to obtain an IP address automatically. When Specify IP is selected, type the IP address, subnet mask, and defaul...

Page 20 - DNS; This allows you to set the DNS server.

3.1.5 Dynamic DNS This allows you to set the DNS server. DDNS: Enable or disable DDNS setting by clicking the blanks. Server Address: Entering the Server Address. For example, if you would like to apply the address at dyndns.org, please entering “members.dyndns.org”.. Host Name: Entering the address...

Page 21 - Enables and disables wireless LAN via the router.

3.2 Wireless This section enables you to set wireless communications parameters for the router's wireless LAN feature. 3.2.1 Basic This page allow you to enable and disable the wireless LAN function, create a SSID, and select the channel for wireless communications. Enable/Disable: Enables and disab...

Page 22 - Enables you to create an encryption scheme for Wireless LAN; Clear; to erase key values.

3.2.2 Authentication This screen enables you to set authentication type for secure wireless communications. Open System allows public access to the router via wireless communications. Shared Key requires the user to set a WEP key to exchange data with other wireless clients that have the same WEP ke...

Page 25 - Click “; Apply

3. Enter the IP address of, Port and Shared Secret used by the Secondary Radius Server. ( Click “ Help ” to get interpretation for Encryption Key and Radius Server. ) 4. Click “ Apply ” button for the 802.1x settings to take effect after Wireless router reboots itself. Note: As soon as 802.1X securi...

Page 26 - Type the beacon interval in the text box. You can specify a value; Fragmentation Threshold:; Type the fragmentation threshold in the text box. If

3.3 Advanced This screen enables you to configure advanced wireless functions. Beacon Interval: Type the beacon interval in the text box. You can specify a value from 1 to 1000. The default beacon interval is 100. RTS Threshold: Type the RTS (Request-To-Send) threshold in the text box. This value st...

Page 27 - Information; Displays the latest build of the router firmware interface. After

3.3 Status This selection enables you to view the status of the router LAN, WAN connections, and view logs and statistics pertaining to connections and packet transfers. 3.3.1 Device Information This screen enables you to view the router LAN, Wireless and WAN configuration. Firmware Version: Display...

Page 29 - Setting; Email Log Now

Note: Displays the IP address of the communication 3.3.3 Log Setting This screen enables you to set router logging parameters. SMTP Server: Type the SMTP server address for the email that the log will be sent to in the next field. Send to: Type an email address for the log to be sent to. Click Email...

Page 34 - Table; Displays the network IP address of the connected node.

3.4.3 Routing Table This screen enables you to view the routing table for the router. The routing table is a database created by the router that displays the network interconnection topology. Network Address: Displays the network IP address of the connected node. Network Mask: Displays the network (...

Page 40 - Server; Click to enable or disable the virtual server.

3.5.2 Virtual Server This screen enables you to create a virtual server via the router. If the router is set as a virtual server, remote users requesting Web or FTP services through the WAN are directed to local servers in the LAN. The router redirects the request via the protocol and port numbers t...

Page 41 - AP

Update: Click to update information for the virtual server if you have selected a list item and have made changes. Delete: Select a list item and click Delete to remove the item from the list. New: Click New to erase all fields and enter new information. 3.5.3 Special AP This screen enables you to s...

Page 42 - Port; Delete

● Protocol: Select the protocol (TCP, UDP, or ICMP) that can be used to access the application. ● Port Range: Type the port range that can be used to access the application in the text boxes. Incoming: Defines which incoming communications users are permitted to connect with. ● Protocol: Select the ...

Page 43 - Rule

Enable: Click to enable or disable the DMZ. DMZ Host IP: Type a host IP address for the DMZ. The computer with this IP address acts as a DMZ host with unlimited Internet access. Apply: Click to save the settings. 3.5.5 Firewall Rule This screen enables you to set up the firewall. The router provides...

Page 47 - Management; Enables you to set up HTTP access for remote management.; Allow to Ping WAN Port:; Type a range of router IP addresses that can be pinged; GAMING MODE; Enables you to set up PPTP access for remote management.

3.6.2 Remote Management This screen enables you to set up remote management. Using remote management, the router can be configured through the WAN via a Web browser. A user name and password are required to perform remote management. HTTP: Enables you to set up HTTP access for remote management. ● E...

Page 49 - Restore Factory Default Settings:; Click to restore the default settings. All

3.7.2 Settings This screen enables you to save your settings as a profile and load profiles for different circumstances. You can also load the factory default settings, and run a setup wizard to configure the router and router interface. Save Settings: Click to save the current configuration as a pr...

Page 51 - Test; Access Point

3.7.4 Ping Test The ping test enables you to determine whether an IP address or host is present on the Internet. Type the host name or IP address in the text box and click Ping. 4. Glossary Access Point An interview networking device that seamlessly connects wired and wireless networks Authenticatio...

Page 52 - The domain name typically refers to an Internet site address.

DHCP DHCP (Dynamic Host Configuration Protocol) software automatically assigns IP addresses to client stations logging onto a TCP/IP network, which eliminates the need to manually assign permanent IP addresses. DNS DNS stands for Domain Name System. DNS converts machine names to the IP addresses tha...

Page 55 - A protocol is a rule that governs the communication of data.

Protocol A protocol is a rule that governs the communication of data. RIP RIP (Routing Information Protocol) is a routing protocol that is integrated in the TCP/IP protocol. RIP finds a route that is based on the smallest number of hops between the source of a packet and its destination. RTS RTS (Re...