Page 2 - Preface; About this manual; system, or translated into any language in any form or by any means,
Preface About this manual Congratulations on purchasing the IPS-0008. This user manual provides detailed descriptions of the hardware components and how to use it. Read this manual carefully and follow the instructions while using the IPS-0008. Copyright information No part of this manual, including...
Page 3 - Safety instructions
Safety instructions Follow these safety instructions to avoid injury to self and damage to the IPS-0008. To reduce the risk of fire or electric shock, install the unit in a temperature-controlled indoor area free of conductive contaminants. Do not place the unit near liquids or in an excessively h...
Page 4 - Table Content
Table Content 1. INTRODUCTION....................................................................................................... 1 1.1. F EATURES ........................................................................................................ 2 1.2. P ACKAGE CONTENTS .......................
Page 12 - Remote control mode
1.3.3. Using the control buttons You can turn on power manually for each of the eight output devices with the control buttons provided under each status indicator A through H. Each button allows you to set the remote control function as well as turn power on/off for each outlet manually. The control...
Page 19 - The IPS-0008 provides two digital outputs to which you can connect
2.5. Connecting Output Devices The IPS-0008 has eight power outlets for connecting devices such as workstations, servers, and printers. Their power on/off status can be con- trolled manually as well as remotely through the LAN and Console ports. Connect the power connectors of the devices to each of...
Page 23 - Using the Console Menu
3. Using the Console Menu The IPS-0008 is provided with a serial port that enables you to configure and control the system through your PC’s RS-232 serial (COM) port. Use the serial cable provided to connect the console port to your PC’s COM port as described in “Connecting the console” on page 15. ...
Page 25 - The main menu options are displayed.
Page 26 - Navigating Through the Console Menu
3.2. Navigating Through the Console Menu Follow these steps to navigate through the console menu to modify settings: To select a submenu, type the number corresponding to the submenu and press Enter. For example, to select the IPS-0008 Configuration menu, type 1 and press Enter. Submenus may have ...
Page 29 - Using the Web Interface; a web browser such as Internet Explorer. This enables you to access
4. Using the Web Interface The IPS-0008 provides a graphic user interface that can be viewed from a web browser such as Internet Explorer. This enables you to access and control the IPS-0008 outlets and subsequently, it’s output devices remotely from your desktop, laptop, PDA, or even your mobile ph...
Page 40 - Appendix; Specifications; Dimensions and Weight
Appendix Specifications Power Input/Output 110V model AC Input: IEC C20 inlet, 15 Amp, 100 ~ 125VAC, 50/60Hz AC Output: NEMA 5-15R outlet, 15 Amp, 100 ~ 125 VAC, 50/60Hz Load: 15 Amp for each outlet 220V model AC Input: IEC C20 inlet, 15 Amp, 200 ~ 250 VAC, 50/60Hz AC Output: IEC C13 outle...
Page 41 - Error codes; Error code
Error codes Error code Description E01 Network link down E02 Parameters checksum error E03 Input voltage over threshold high (Volt) E04 Input voltage over threshold low (Volt) E05 Outlet A current over threshold (Amp) E06 Outlet B current over threshold (Amp) E07 Outlet C current over threshold (Amp...
Page 42 - Regulatory information
Regulatory information FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions: This device may not cause harmful interference; and This device must accept any interference received, including interference that may cause undesired operat...