LevelOne GSW-0440T - Manuals

Page 2 - TABLE OF CONTENTS

2 TABLE OF CONTENTS 1 UNPACKING INFORMATION................................................... 4 2 PRODUCT INTRODUCTION .................................................... 5 2.1 Models .......................................................................................... 5 2.2 Key Features........

Page 4 - Power Cord

4 1 UNPACKING INFORMATION Thank you for purchasing this LevelOne 11" Smart Switch. Before continuing, please check the contents of the product package. This product package should contain the following items: One (1) Gigabit Ethernet Switch. One (1) Power Cord. One (1) Console Cable Four (4) Rub...

Page 5 - Features

5 2 PRODUCT INTRODUCTION 2.1 Models These LevelOne 11" smart switches provide Four (4) / Eight (8) Gigabit copper ports. Each port is equipped with 2000 Mbps, Full-Duplex, Collision Free Bandwidth. It’s a multi-speed, versatile network device that combines Gigabit, Fast Ethernet, and Ethernet po...

Page 6 - The Rear Panel

6 used. Port Type Cable Type Connector 1000BASE-T Cat.5 TP RJ-45 100BASE-TX Cat.5 TP RJ-45 10BASE-T Category 3, 4 or 5 TP RJ-45 Note: Category 5 TP cable recommended whenever installing new cabling. To transmit at 1000Mbps requires Category 5 TP cable using Four (4) pairs Twisted-Pair wire. 2.3.3 St...

Page 8 - INSTALLATION; To locate the switch on a rackmount:

8 3 INSTALLATION The LevelOne 11" Gigabit Ethernet Smart Switch is "Plug-&-Play". It does not require software configuration. Users can immediately use any of the features of this product simply by attaching the cables and turning on the power. 3.1 To locate the switch on a rackmount...

Page 9 - Prior to Installation

9 4 HELPFUL SUGGESTIONS 4.1 Prior to Installation Before installing the Switch and connecting network devices, it is important to plan the network's layout. Things you should consider include: Dedicated Bandwidth: File servers and other high-traffic hardware improve their performance if they have th...

Page 12 - SMART FUNCTION CONFIGURATION; Start Menu; None

12 6 SMART FUNCTION CONFIGURATION 6.1 HyperTerminal The Switch has a smart function that you can use to manage your local area network (LAN) more effectively. You can also use the default setting to operate the Switch as a dumb switch. If you want to use smart function, install the Switch as below: ...

Page 13 - Menu; LevelOne GSW-0840T; Status

13 7 Configuration Menu 7.1 Main Menu The main menu function selections are listed below: 1. Port Status 2. Port Config 3. Mirror Config 4. VLAN Config 5. Misc Config 6. Save Config 7. Load Default Now we use the 8 ports switch as an example for explanation; the functions of 4 ports switch is the sa...

Page 15 - Config

15 LevelOne GSW-0840T 8-Port Gigabit Smart Switch =========================== Port Mirroring: Disable <+>:Next Item <->:Back <ESC>:Exit <Enter>:Toggle Version A1 In the “Port Mirroring” sub-menu, you can setup the following settings. Port Mirroring: Enable or Disable the Port...

Page 21 - FCC WARNING; a commercial environment.; CE MARK WARNING; user may be required to take adequate measures.

21 FCC WARNING This equipment has been tested and found to comply with the limits for a Class A computing device pursuant to Part 15 of FCC Rules, which are designed to provide reasonable protection against electromagnetic interference in a commercial environment. Changes or modifications to the equ...