LevelOne Gigabit Chassis switch - Manuals

Page 3 - Contents

Contents 1. INTRODUCTION ......................................................................................................1 Features .......................................................................................................................1 Package Contents ...........................

Page 5 - Features

1 1. Introduction GSW-2453, 3-slot Gigabit Chassis switch, is a modular Switch that can be used to build high-performance switched workgroup networks. This switch is a store-and-forward device that offers low latency for high-speed networking. The Switch is targeted at workgroup, department or backb...

Page 6 - Package Contents; Unpack the contents of the; Ethernet Switching Technology

2 Package Contents Unpack the contents of the GSW-2453 and verify them against the checklist below. GSW-2453 Power Cord Four Rubber Feet Rack-mounted kit User Guide GSW-2453 Four Rubber Feet Power Cord Rack-mounted Kit User Guide Figure 1-2. Package Contents Compare the contents of your GS...

Page 8 - Hardware Description; Physical Dimension; Front Panel; LED Indicators

4 2. Hardware Description This Section mainly describes the hardware of the GSW-2453, and gives a physical and functional overview of this chassis switch. Physical Dimension The GSW-2453 physical dimension is 440mm(W) x 224mm(D) x 44mm(H) . Front Panel The Front Panel of the GSW-2453 consists of 3 m...

Page 10 - Rear Panel; Desktop Installation; Attaching Rubber Feet; Rack-mounted Installation

6 Rear Panel The 3-pronged power plug, 2 fans, power switching is located at the rear panel of the GSW-2453 as shown in Figure 2-2. The switch will work with AC power in the range of 100-240V AC, 50-60Hz. Figure 2-2. The Rear Panel of the 3-slot Gigabit Cassis switch Desktop Installation Set the Swi...

Page 11 - Power On

7 A. Position one bracket to align with the holes on one side of the switch and secure it with the smaller bracket screws. Then attach the remaining bracket to the other side of the Switch. B. After attached both mounting brackets, position the switch in the rack by lining up the holes in the bracke...

Page 12 - Network Application

8 3. Network Application GSW-2453 is designed as a segment switch. That is, with its large address table (4000 MAC address) and high performance, it is ideal for interconnecting networking segments. PC, workstations, and servers can communicate each other by directly connecting with 3-slot Gigabit C...

Page 13 - Incorrect connections; Faulty or loose cables

9 4. Troubleshooting This section is intended to help you solve the most common problems on the GSW-2453. Incorrect connections The switch port can auto detect straight or crossover cable when you link switch with other Ethernet device. For the UTP connector should use correct UTP or STP cable, 10/1...

Page 14 - Diagnosing LED Indicators; Cabling

10 at any time. Data path loops will cause broadcast storms that will severely impact your network performance. Diagnosing LED Indicators The Switch can be easily monitored through panel indicators to assist in identifying problems, which describes common problems you may encounter and where you can...

Page 15 - Technical Specification

11 5. Technical Specification This section provides the specifications of the GSW-2453 and the following table lists these specifications. Standard IEEE802.3 10Base-T IEEE802.3u 100Base-TX IEEE802.3z Gigabit fiber IEEE802.3ab 1000Base-T Switch architecture Store and forward switch architecture LED I...