Lenovo V580c Notebook- Manuals

Page 2 - under Appendix A “Notices” on page 105.

Note: Before using this information and the product it supports, be sure to read the general information under Appendix A “Notices” on page 105. Fourth Edition (April 2013) © Copyright Lenovo 2012. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Adm...

Page 3 - Contents; iii

Contents About this manual. . . . . . . . . . . iii Chapter 1. Safety information . . . . . . 1 General safety . . . . . . . . . . . . . . . . 1 Electrical safety . . . . . . . . . . . . . . . 2 Safety inspection guide . . . . . . . . . . . . 3 Handling devices that are sensitive to electrostaticdis...

Page 4 - ii

Page 5 - About this manual; Machine; Use this manual to troubleshoot problems.

About this manual This manual provides service and reference information for the following Lenovo ® products. Machine Machine type (MT) Lenovo V580 4738, 20147 Lenovo V580c 4980, 20160 Use this manual to troubleshoot problems. The manual is divided into the following sections: • The common sections ...

Page 6 - iv

Page 7 - Chapter 1. Safety information; General safety

Chapter 1. Safety information This chapter presents following safety information that you need to be familiar with before you service aLenovo Notebook.• “General safety” on page 1 • “Electrical safety” on page 2 • “Safety inspection guide” on page 3 • “Handling devices that are sensitive to electros...

Page 8 - Electrical safety; exposed

Electrical safety Observe the following rules when working on electrical equipment. Important: Use only approved tools and test equipment. Some hand tools have handles covered with a soft materialthat does not insulate you when working with live electrical currents.Many customers have, near their eq...

Page 10 - Grounding requirements; DANGER

2. Make sure that the ESD protective devices you use have been certified (ISO 9000) as fully effective. When handling ESD-sensitive parts: • Keep the parts in protective packages until they are inserted into the product. • Avoid contact with other people. • Wear a grounded wrist strap against your s...

Page 25 - Laser compliance statement (multilingual translations)

Laser compliance statement (multilingual translations) The laser compliance statements in this section are provided in the following languages:• English• Arabic• Brazilian Portuguese• French• German• Hebrew• Japanese• Korean• Spanish• Traditional Chinese Chapter 1 . Safety information 19

Page 33 - Chapter 2. Important service information; Strategy for replacing FRUs; Before replacing parts:

Chapter 2. Important service information This chapter presents the following important service information that applies to all machine types supportedby this manual:• “Strategy for replacing FRUs” on page 27 – “Strategy for replacing a hard disk drive” on page 28 – “Important notice for replacing a ...

Page 34 - For products shipped after June 2006; Current or original part

• If an adapter or a device consists of more than one FRU, any of the FRUs may be the cause of the error. Before replacing the adapter or device, remove the FRUs, one by one, to see if the symptoms change.Replace only the FRU that changed the symptoms. Strategy for replacing a hard disk drive Always...

Page 35 - Chapter 3. General checkout; “What to do first” on page 29; Only certified trained personnel should service the computer.; Replace a FRU only with another FRU of the correct model.; Be careful not to replace a nondefective FRU.; What to do first; The following are not covered under warranty:

Chapter 3. General checkout This chapter presents following information:• “What to do first” on page 29 • “Power system checkout” on page 30 Before you go to the checkout guide, be sure to read the following important notes. Important notes: • Only certified trained personnel should service the comp...

Page 36 - Pin

• Diskette drive damage caused by pressure on the diskette drive cover, foreign material in the drive, or the insertion of a diskette with multiple labels • Damaged or bent diskette eject button• Fuses blown by attachment of a nonsupported device• Forgotten computer password (making the computer unu...

Page 37 - Noise from the ac power adapter does not always indicate a defect.; Checking operational charging; The battery status icon in the Windows; Battery; To check the battery pack, do the following:; Terminal; The resistance must be 4 to 30 K Ω.

Note: Noise from the ac power adapter does not always indicate a defect. Checking operational charging To check whether the battery charges properly during operation, use a discharged battery pack or a batterypack that has less than 50% of the total power remaining when installed in the computer. Pe...

Page 39 - Chapter 4. Related service information; Recovering the computer settings

Chapter 4. Related service information This chapter presents the following information:• “Recovering the computer settings” on page 33 • “Passwords” on page 33 • “Power management” on page 34 Recovering the computer settings This topic provides information about the recovery programs that are availa...

Page 40 - Supervisor password; board must be replaced for a scheduled fee.; Power management; To end screen blank mode and resume normal operation, press any key.; Sleep mode

If any of these passwords has been set, a prompt for it will be displayed on the screen whenever thecomputer is turned on. The computer does not start until the password is entered. Note: If only a supervisor password is set, the password prompt will not be displayed when the operating system is sta...

Page 41 - before taking any action to reenter operation mode.; Hibernation mode; In hibernation mode, the following occurs:

Also, when the time set on the resume timer elapses, the computer automatically returns from sleep modeand resumes operation. Note: The computer does not accept any input immediately after it enters sleep mode. Wait a few seconds before taking any action to reenter operation mode. Hibernation mode I...

Page 43 - Specifications; Start

Chapter 5. Lenovo V580 and V580c This chapter presents the following product-specific service references and parts information: • “Specifications” on page 37 • “Status indicators” on page 38 • “Fn key combinations” on page 41 Specifications This topic lists the physical features for the Lenovo V580 ...

Page 44 - Status indicators

• Two USB 3.0 connectors • RJ45 Ethernet connector • HDMI port • External monitor connector • 4-in-1 digital media card reader slot Optical drive • 12.7 mm Rambo optical drive (on some models) Wireless features • Integrated wireless LAN • Integrated WiMAX • 10/100/1000 Mbps Ethernet communication Se...

Page 45 - Indicator

Table 1. Status indicators Indicator Meaning 1 Caps Lock statusindicator White: Caps Lock mode is enabled. You can type all alphabetic characters (A-Z) in uppercase directly. To enable or disable Caps Lock mode, press the Caps Lock key. 2 Numeric Lock statusindicator White: The separate numeric keyp...

Page 47 - Fn key combinations; Key combination

Fn key combinations The following table describes the functions of Fn key combinations. Table 3. Function key combinations Key combination Description Fn+Esc Launches the camera and audio settings window. Fn+F1 Puts the computer into sleep mode. To resume normal operation, pressthe Fn key only. Fn+F...

Page 49 - Chapter 6. FRU replacement notices; CRU statement for customers:; Installation of self-service CRUs is your responsibility. For; Screw notices; Do the following when you service the computer:; Plastic to plastic

Chapter 6. FRU replacement notices This chapter presents notices related to removing and replacing parts. Read this chapter carefully beforereplacing any FRU. CRU statement for customers: You can resolve some problems with your product with a replacement part you can install yourself, calleda “Custo...

Page 51 - Chapter 7. Removing and replacing a FRU; General guidelines; the risk of damaging parts.

Chapter 7. Removing and replacing a FRU This chapter provides instructions on how to remove or replace a FRU. CRU statement for customers: You can resolve some problems with your product with a replacement part you can install yourself, calleda “Customer Replaceable Unit” or “CRU.” Some CRUs are des...

Page 52 - Unlock the manual battery latch

1010 Battery pack Removal steps of battery pack DANGER Use only the battery specified in the parts list for your computer. Any other battery could igniteor explode. Unlock the manual battery latch 1 . Hold the right battery latch in the unlocked position, and then remove the battery pack 2 . 2 1 2 W...

Page 53 - Removal steps of bottom slot cover; Remove the screws; 030 Optical drive or blank bezel; Removal steps of optical drive or blank bezel; Remove the screw

Removal steps of bottom slot cover Remove the screws 1 , and then remove the cover 2 . 2 2 1 1 Step Screw (quantity) Color Torque 1 M2 × 3 mm, flat-head, nylon-coated (2) Black 1.85 kgf-cm 1030 Optical drive or blank bezel For access, remove these FRUs in order:• “1010 Battery pack” on page 46 • “10...

Page 54 - Removal steps of optical drive bezel and optical drive bracket

Insert a screwdriver into the screw hole 2 . Then push the optical drive in the direction shown by the arrow 3 to remove the drive. 3 2 Removal steps of optical drive bezel and optical drive bracket Remove the optical drive bezel in the direction shown by the arrow in the following illustrations. Fo...

Page 55 - and then remove the optical drive bracket.; For Lenovo V580 models; For Lenovo V580c models

Remove the screw(s) 1 and then remove the optical drive bracket. For Lenovo V580 models 1 2 Step Screw (quantity) Color Torque 1 M2 × 3 mm, flat-head, nylon-coated (1) Black 1.85 kgf-cm For Lenovo V580c models 1 1 2 Step Screw (quantity) Color Torque 1 M2 × 3 mm, flat-head, nylon-coated (2) Black 1....

Page 56 - Removal steps of memory modules; 050 Hard disk drive assembly; handling can cause damage and permanent loss of data.

Removal steps of memory modules Release the two latches on both edges of the socket at the same time in the direction shown by the arrows 1 , and then unplug the memory module in the direction shown by the arrow 2 . 1 1 2 When installing: Insert the notched end of the memory module into the socket. ...

Page 57 - Removal steps of hard disk drive assembly; Step; Ensure that the hard disk drive connector is attached firmly.

Removal steps of hard disk drive assembly Remove the screw 1 , then pull the tab in the direction shown by the arrow 2 . 2 1 Step Screw (quantity) Color Torque 1 M2 × 3 mm, flat-head, nylon-coated (1) Black 1.85 kgf-cm Remove the hard disk drive from the slot in the direction shown by the arrow 3 . ...

Page 58 - Removal steps of hard disk drive bracket; 060 PCI Express Mini Card for wireless LAN

Removal steps of hard disk drive bracket Remove the screws 1 . 1 1 1 1 Step Screw (quantity) Color Torque 1 M3 × 4 mm, flat-head, nylon-coated (4) Black 4.0 kgf-cm Remove the hard disk drive bracket in the direction shown by the arrow 2 . 2 1060 PCI Express Mini Card for wireless LAN For access, rem...

Page 59 - Removal steps of PCI Express Mini Card for wireless LAN; In steps

Removal steps of PCI Express Mini Card for wireless LAN In steps 1 , unplug the connectors using the removal tool antenna RF connector (P/N: 08K7159) or pick the connectors with your fingers and gently unplug them in the direction of the arrows. Then remove the screw 2 . 2 1 1 Step Screw (quantity) ...

Page 60 - 070 mSATA solid-state drive; Removal steps of mSATA solid-state drive

1070 mSATA solid-state drive For access, remove these FRUs in order:• “1010 Battery pack” on page 46 • “1020 Bottom slot cover” on page 46 Attention: • Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper handling can cause damage and permanent ...

Page 61 - Pry the backup battery out using a screwdriver.

Remove the mSATA solid-state drive in the direction shown by the arrow 2 . 2 1080 Backup battery Removal steps of backup battery DANGER Use only the battery specified in the parts list for your computer. Any other battery could igniteor explode. Pry the backup battery out using a screwdriver. Chapte...

Page 62 - Removal steps of keyboard; to unlatch the front edge of the keyboard.

1090 Keyboard For access, remove these FRUs in order:• “1010 Battery pack” on page 46 • “1020 Bottom slot cover” on page 46 Removal steps of keyboard Remove the screws 1 . 1 1 1 When installing: Ensure that the screws have been fastened to secure the keyboard. Step Screw (quantity) Color Torque 1 M2...

Page 63 - Detach the keyboard lightly in the direction shown by the arrow

Detach the keyboard lightly in the direction shown by the arrow 3 . 3 Chapter 7 . Removing and replacing a FRU 57

Page 65 - Removal steps of keyboard bezel

Removal steps of keyboard bezel Remove the screws 1 and 2 that secure the keyboard bezel. 1 1 1 1 1 1 1 1 1 1 2 2 2 Step Screw (quantity) Color Torque 1 M2.5 × 8 mm, flat-head, nylon-coated (10) Black 4.0 kgf-cm 2 M2 × 3 mm, flat-head, nylon-coated (3) Silver 1.85 kgf-cm Remove the screws 3 . 3 3 3 ...

Page 67 - 110 Fingerprint bracket and fingerprint board; “1030 Optical drive or blank bezel” on page 47; Removal steps of fingerprint bracket and fingerprint board

1110 Fingerprint bracket and fingerprint board For access, remove these FRUs in order:• “1010 Battery pack” on page 46 • “1020 Bottom slot cover” on page 46 • “1030 Optical drive or blank bezel” on page 47 • “1090 Keyboard” on page 56 • “1100 Keyboard bezel” on page 58 Removal steps of fingerprint b...

Page 68 - Removal steps of LED board; Peel off the mylar tape in the direction shown by the arrow; Remove the LED board in the direction shown by the arrow

• “1030 Optical drive or blank bezel” on page 47 • “1090 Keyboard” on page 56 • “1100 Keyboard bezel” on page 58 Removal steps of LED board Peel off the mylar tape in the direction shown by the arrow 1 . For Lenovo V580 models 1 For Lenovo V580c models 1 Remove the LED board in the direction shown b...

Page 70 - Removal steps of touch pad for Lenovo V580 models; Remove the touch pad in the direction shown by the arrow

Removal steps of touch pad for Lenovo V580 models Remove the touch pad cable and then push the touch pad in the direction shown by the arrow 3 . 1 2 3 Remove the touch pad in the direction shown by the arrow 4 . 4 64 Hardware Maintenance Manual

Page 71 - Removal steps of touch pad bracket for Lenovo V580c models; Removal steps of power board

Removal steps of touch pad bracket for Lenovo V580c models Remove the screw 1 and then remove the touch pad bracket in the direction shown by the arrow 2 . 1 2 Step Screw (quantity) Color Torque 1 M2 × 3 mm, flat-head, nylon-coated (1) Black 1.85 kgf-cm 1140 Power board For access, remove these FRUs...

Page 72 - Removal steps of microphone assembly; Detach the connector

For Lenovo V580c models 2 1 Step Screw (quantity) Color Torque 1 M2 × 3 mm, flat-head, nylon-coated (1) Black 1.85 kgf-cm 1150 Microphone assembly For access, remove these FRUs in order:• “1010 Battery pack” on page 46 • “1020 Bottom slot cover” on page 46 • “1030 Optical drive or blank bezel” on pa...

Page 73 - Removal steps of I/O board; Ensure that the cable is attached firmly to the system board.

1160 I/O board For access, remove these FRUs in order:• “1010 Battery pack” on page 46 • “1020 Bottom slot cover” on page 46 • “1030 Optical drive or blank bezel” on page 47 • “1090 Keyboard” on page 56 • “1100 Keyboard bezel” on page 58 Removal steps of I/O board Remove the screws 1 . Detach the ca...

Page 74 - Removal steps of USB board

Removal steps of USB board Remove the screw 1 , and detach the USB cable. Then remove the USB board in the direction shown by the arrow 4 . 3 2 1 4 Step Screw (quantity) Color Torque 1 M2 × 5 mm, flat-head, nylon-coated (1) Silver 1.85 kgf-cm 1180 DC-in connector For access, remove these FRUs in ord...

Page 75 - Removal steps of DC-in connector; Disconnect the DC-in connector; Important notices for removing the system board

Removal steps of DC-in connector Disconnect the DC-in connector 1 , and remove the screw 2 . Then remove the DC-in bracket and DC-in cable as shown in the following illustration. 2 4 4 3 1 Step Screw (quantity) Color Torque 2 M2 × 3 mm, flat-head, nylon-coated (1) Black 1.85 kgf-cm 1190 System board...

Page 76 - Removal steps of system board assembly

For access, remove these FRUs in order:• “1010 Battery pack” on page 46 • “1020 Bottom slot cover” on page 46 • “1030 Optical drive or blank bezel” on page 47 • “1040 Memory modules” on page 49 • “1050 Hard disk drive assembly” on page 50 • “1060 PCI Express Mini Card for wireless LAN” on page 52 • ...

Page 78 - Removal steps of thermal fan assembly

1200 Thermal fan assembly For access, remove these FRUs in order:• “1010 Battery pack” on page 46 • “1020 Bottom slot cover” on page 46 • “1030 Optical drive or blank bezel” on page 47 • “1040 Memory modules” on page 49 • “1050 Hard disk drive assembly” on page 50 • “1060 PCI Express Mini Card for w...

Page 81 - Removal steps of microprocessor

• “1090 Keyboard” on page 56 • “1100 Keyboard bezel” on page 58 • “1150 Microphone assembly” on page 66 • “1190 System board assembly” on page 69 • “1200 Thermal fan assembly” on page 72 Attention: The microprocessor is extremely sensitive. When you service the microprocessor, avoid any kind of roug...

Page 82 - Removal steps of LCD unit

• “1090 Keyboard” on page 56 • “1100 Keyboard bezel” on page 58 • “1150 Microphone assembly” on page 66 • “1160 I/O board” on page 67 • “1190 System board assembly” on page 69 Removal steps of LCD unit Release the antenna cables from the cable guides. Then remove the screws 1 . 1 1 1 1 Step Screw (q...

Page 83 - Remove the LCD unit in the direction shown by the arrow; 230 Speaker assembly and base cover

Remove the LCD unit in the direction shown by the arrow 2 . 2 1230 Speaker assembly and base cover For access, remove these FRUs in order:• “1010 Battery pack” on page 46 • “1020 Bottom slot cover” on page 46 • “1030 Optical drive or blank bezel” on page 47 • “1040 Memory modules” on page 49 • “1050...

Page 84 - Removal steps of speaker assembly and base cover

Removal steps of speaker assembly and base cover Remove the screws 1 . Then remove the speaker assembly 2 . 1 1 1 1 2 2 Step Screw (quantity) Color Torque 1 M2.5 × 5.7 mm, flat-head, nylon-coated (4) Black 4.0 kgf-cm 78 Hardware Maintenance Manual

Page 85 - Applying labels to the base cover; , return the old part

Applying labels to the base cover The new base cover is shipped with a kit containing labels of several kinds. Apply those labels listed whenyou replace the base cover. For the labels which are not shipped with the new base cover, peel them offfrom the old base cover, and adhere them to the new one....

Page 86 - Removal steps of LCD front bezel; Remove the LCD front bezel in the direction shown by the arrows

2010 LCD front bezel For access, remove these FRUs in order:• “1010 Battery pack” on page 46 • “1220 LCD unit” on page 75 Removal steps of LCD front bezel Remove the screws 1 . 1 1 Step Screw (quantity) Color Torque 1 M2 × 3.5 mm, flat-head, nylon-coated (2) Black 1.85 kgf-cm Remove the LCD front be...

Page 87 - Removal steps of integrated camera; The integrated camera is stuck on the top center of the LCD cover.

2020 Integrated camera For access, remove these FRUs in order:• “1010 Battery pack” on page 46 • “1220 LCD unit” on page 75 • “2010 LCD front bezel” on page 80 Removal steps of integrated camera Remove the integrated camera from the LCD cover as shown in the following illustration. Note: The integra...

Page 88 - Removal steps of LCD panel and LCD cable

Removal steps of LCD panel and LCD cable Remove the screws 1 . Then remove the LCD panel in the direction shown by the arrow 2 . 1 1 1 1 1 1 2 Step Screw (quantity) Color Torque 1 M2 × 3.5 mm, flat-head, nylon-coated (6) Silver 1.85 kgf-cm Turn over the LCD panel in the direction shown by the arrow ...

Page 89 - Removal steps of hinges; 040 Antenna assembly and LCD rear cover; “2030 LCD panel, LCD cable, and hinges” on page 81

Removal steps of hinges Remove the screws 1 , and then remove the hinges 2 . 1 1 2 1 1 2 Step Screw (quantity) Color Torque 1 M2 × 3.5 mm, flat-head, nylon-coated (4) White 1.85 kgf-cm 2040 Antenna assembly and LCD rear cover For access, remove these FRUs in order:• “1010 Battery pack” on page 46 • ...

Page 90 - Removal steps of antenna assembly and LCD rear cover

Removal steps of antenna assembly and LCD rear cover Release the antenna cables from the cable guides of the LCD rear cover assembly and from the hinges inthe direction shown by the arrows 1 . 1 1 Cable routing: Route the antenna cables along the cable guides and secure the antenna boards with tape....

Page 91 - This chapter introduces the location of the hardware components.; Front view

Chapter 8. Locations This chapter introduces the location of the hardware components. Front view 2 1 2 3 4 5 6 7 9 8 10 11 12 13 14 16 15 17 Figure 1. Lenovo V580 front view 1 Integrated camera (on some models) 10 Combo audio jack 2 Wireless antennas 11 Media card reader slot 3 Status indicators 1 1...

Page 93 - Bottom view

Bottom view 1 2 3 4 5 6 7 8 9 10 Figure 3. Bottom view 1 Battery latch (manual) 6 Monitor connector 2 Battery pack 7 RJ45 Ethernet connector 3 Battery latch (spring-loaded) 8 HDMI port 4 Security keyhole 9 USB 3.0 connectors 5 Fan louvers 10 Bottom slot cover 1 1 The memory modules, hard disk drive,...

Page 95 - Chapter 9. Parts list; CRU ID; Overall

Chapter 9. Parts list This chapter contains following lists of the service parts.• “Overall” on page 89 • “LCD FRUs” on page 96 • “Keyboard” on page 98 • “Miscellaneous parts” on page 99 • “ac power adapters” on page 100 • “Power cords” on page 101 Notes: • Each FRU is available for all types or mod...

Page 96 - Overall for Lenovo V580 models

Overall for Lenovo V580 models 1 2 a 3 4 c b 5 d 7 6 f e g 9 8 10 h 12 11 22 20 21 j 19 18 17 16 15 i 13 14 Table 4. Parts list—Overall for Lenovo V580 models No. FRU (Overall) FRU No. CRUID a-j See “Miscellaneous parts” on page 99 1 LCD unit (see “LCD FRUs” on page 96) 2 LA58 Power Board 90000412 N...

Page 99 - Overall for Lenovo V580c models

Overall for Lenovo V580c models 1 2 a 4 3 5 c d b 6 7 8 9 e f 10 11 g 13 12 23 22 21 20 19 18 17 16 h j 14 15 Table 5. Parts list—Overall for Lenovo V580c models No. FRU (Overall) FRU No. CRUID a-j See “Miscellaneous parts” on page 99 1 LCD unit (see “LCD FRUs” on page 96) 2 LA58C Power Board 900005...

Page 102 - LCD FRUs

Table 5. Parts list—Overall for Lenovo V580c models (continued) No. FRU (Overall) FRU No. CRUID 21 Microprocessor, Intel SNB B960 2.2G 2M 35W PGA 102500133 N 21 Microprocessor, Intel I3-2370M 2.4G J1 3M 2cPGA 102500228 N 21 Microprocessor, Intel I5-2520M 2.5G 3M 2c J1 PGA 102001067 N 21 Microprocess...

Page 104 - Keyboard; Language

Keyboard Table 7. Parts list - Keyboard (Dafon) Language FRU No. CRUID Arabic 2520426625204356 N Belgian 2520427425204364 N Brazilian Portuguese 2520426725204357 N Bulgarian 2520428025204370 N French, English 2520426025204350 N Czech, Slovak 2520427925204369 N Swedish, Finnish, Danish, Norwegian 252...

Page 105 - Miscellaneous parts; “Miscellaneous parts for Lenovo V580 models” on page 99; Miscellaneous parts for Lenovo V580 models; FRU

Table 7. Parts list - Keyboard (Dafon) (continued) Language FRU No. CRUID Swiss 2520427725204367 N Spanish 2520425525204345 N Thai 2520425725204347 N Traditional Chinese 2520426225204352 N Turkish 2520425625204346 N U.K. English 2520425325204343 N U.S. English 2520425225204342 N U.S. English (Intern...

Page 106 - Miscellaneous parts for Lenovo V580c models; ac power adapters

Table 9. Parts list - Cable miscellaneous parts (continued) FRU FRU no. CRUID (f) LB58 DC-IN Cable 90200811 N ( j LA58 Touchpad Board Cable 90201169 N (k) LA58 LCD Cable 90201171 N Miscellaneous parts for Lenovo V580c models Note: Italicized letters in parentheses are references to the exploded view...

Page 107 - Power cords

Table 13. Parts list—2-pin (90 W) ac power adapters FRU FRU no. CRUID 2–pin, Eup models 362001023620010136200103 * 2–pin, EPA models 362001473620014936200150 * 2–pin, CS2 plug 362002953620029736200299 * Table 14. Parts list—3-pin (65 W) ac power adapters FRU FRU no. CRUID 3–pin, Eup models 362000963...

Page 108 - Country or region

Table 16. Parts list - 3-pin power cords (Linetek) Country or region FRU no. CRUID Argentina • LINETEK LS15+H03VV-F+LP39 1 m 145000599 * Australia, New Zealand • LINETEK LS15+H03VV-F+LP-23A 1 m 145000589 * Brazil • LINETEK LS15 H03VV-F LP26A 1 m 145000596 * European Union • LINETEK LP-34+H03VV-F + L...

Page 112 - Electronic emissions notices; User Guide; Trademarks; Windows is a trademark of the Microsoft group of companies.

Electronic emissions notices For electronic emission information on Class B digital devices, refer to the corresponding information inthe User Guide . Trademarks The following terms are trademarks of Lenovo in the United States, other countries or both: Active Protection SystemLenovoOneKey Windows i...