Lenovo ThinkVision T2220 21.5-inch WLED Backlit LCD Monit- Manuals

Chapter 1. Getting started This User’s Guide contains detailed information on the your Flat Panel Monitor. For a quick overview , please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following items: • Setup Poster • Flat Panel Moni...

Product overview This section will provide information on adjusting monitor positions , setting user controls , and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. -5° 22° Height Adjustment After pressing the top of the monitor...

Monitor controls Your monitor has controls on the front which are used to adjust the display. For information on how to use these controls , please see "Adjusting your monitor image"on page 2-3. Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monit...

Setting up your monitor This section provides information on how to set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety information located on page iii before carrying out this procedure . 1. Power off your computer and all attached devices , and unplug the c...

3. Connect one end of the analog signal cable to the monitor D-SUB connector and the other end to the computer. 4. Connect the digital cable to the DVI connector of the monitor and the other end on the back of the computer. Chapter 1. 1-5

5. Insert the power cord into the monitor, then plug the monitor power cord and the computer cord into grounded electrical outlets. Note: A certified power supply cord has to be used with this equipment. The relevan national installation and or equipment regulations shall be considered. A certified ...

8. When you install the monitor driver, download the driver that corresponds to your monitor model from the Lenovo website http://support.lenovo.com / T2220 w A . Refer to the “ Manually Install Monitor Driver” section to install the driver. 9. To optimize your monitor image, press the Automatic Ima...

Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use...

• Use the monitor brightness, contrast controls, if equipped to optimize the image on your screen to meet your visual preferences. • Keep your monitor screen clean so you can focus on the screen’s contents.Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to periodi...

Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Table 2-1. Direct access controls Icon Control Description Input Change Sw...

Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes.The image size, position and shape might change when the display mode changes. This is normal and the image c...

Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day...

Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: • Apply water or liquid directly to your monitor.• Use solvents or abrasives.• Use flammable cleaning materials to clean your monitor or any other electrical equipment. • Touch the screen...

Chapter 3.Reference information This section contains monitor specifications, instructions to manually install the monitodriver, troubleshooting information. Monitor specifications Table 3-1. Monitor specifications for type-model 60B7-HAR1-WW Dimensions Height 356.3 mm (14.03 in.) Depth 177.2 mm (6....

Table 3-2. Troubleshooting Problem Possible cause Suggested action Reference The power indicator is green, but there is no image The video signal cable is loose or disconnected from thesystem or monitor. Be sure the video cable is connected with thesystem properly. "Connecting andturning on your...

Manually installing the monitor driver Below are steps for manually installing the monitor driver in Microsoft Windows 7, Microsoft Windows 8, Microsoft Windows 8.1. Installing the monitor driver in Windows 7 To use the Plug and Play feature in Microsoft Windows 7, do the following: 1. Turn off the ...

Installing the monitor driver in Windows 8 To use the Plug and Play feature in Microsoft Windows 8, do the following: 1. Turn off the computer, all attached devices.2. Ensure that the monitor is connected correctly.3. Turn on the monitor and then the system unit. Allow your computer to start the Win...

Installing the monitor driver in Windows 8.1 To use the Plug and Play feature in Microsoft Windows 8.1, do the following: 1. Turn off the computer, all attached devices.2. Ensure that the monitor is connected correctly.3. Turn on the monitor and then the system unit. Allow your computer to start the...

Service information Customer responsibilities The warranty does not apply to a product which has been damaged due to accident, misuse, abuse, improper installation, usage not in accordance with product specifications and instructions, natural or personal disaster, or unauthorized alterations, repair...

Appendix A. Service and Support The following information describes the technical support that is available for your product, during the warranty period or throughout the life of your product. Refer to the Lenovo Limited Warranty for a full explanation of Lenovo warranty terms. Registering your opti...