Lenovo ThinkVision LT2423 24-inch FHD LED Backlit LCD Mon- Manuals

Chapter 1. Getting started This User ’ s Guide contains detailed information on the Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following items: · Setup Poster · Flat Panel Monitor ...

Product overview This section will provide information on adjusting monitor positions, setting usercontrols, and using the cable lock slot. Types of adjustments Please see the illustration below for an example of the tilt range. User controls Your monitor has controls on the front which are used to ...

Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower left corner). Please follow the instructions that came with the cable lock to attach it. Setting up your monitor This section provides information to help you set up your monitor. Connec...

5. Connect the audio cable to the video port on the back of the computer. 6. Power on the monitor and the computer. 7. Install the monitor driver, download the driver of the corresponding monitor model from the Lenovo Website http://support.lenovo.com/LT2423wC, and then click on the driver and insta...

8. To optimize your monitor image, if using the analog cable, press the Automatic Image Setup key. Automatic image setup requires that the monitor is warmed up for at least 15 minutes. Note: If automatic image setup does not establish the image that you prefer, perform manual image setup. See “ Manu...

Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use...

· Tilt : Adjust the tilt of your monitor to optimize the appearance of the screen content and to accommodate your preferred head and neck posture. · General location : Position your monitor to avoid glare or reflections on the screen from overhead lighting or nearby windows. The following are some o...

Adjusting your monitor image This section describes the user control features used to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Table 2-1. Direct access controls Icon Control Description Image...

Table 2-2. OSD functions OSD Icon Submenu De scription Controls and Controls on M ain Adjustme nts and M e nu (Analog) Adjustments (Digital) Brightness- /Contrast Brightness Adjusts overall brightness Contrast Adjusts difference between light and dark areas Dynamic Co ntrast Ratio This function can ...

Table 2-2. OSD functions (continued) OSD Icon on Submenu Description Controls and Controls and Main Menu Adjustments Adjustments (Analog) (Digital) Options Menu Position Adjusts menu location on the screen. Default Returns the menu position to the default settings. Custom · Horizontal: Changes the h...

The display modes shown below have been optimized at the factory. Table 20-3. Factory set display modes Addressability Refresh rate 640 x 480 60 Hz, 72 Hz, 75 Hz 720 x 400 70 Hz 800 x 600 56 Hz, 60 Hz, 72 Hz, 75 Hz 832 x 624 75 Hz 1024 x 768 60 Hz, 70 Hz, 75 Hz 1152 x 864 75 Hz 1280 x 1024 60 Hz, 70...

Table 2-4. Power indicator State Power Indicator Screen Restoring Operation Compliance On Steady green Normal Standby/Suspend Steady orange Blank Press a key or move the mouse There may be a slight delay before the image reappears. Note: Standby also occurs if there is no image output to the monitor...

Preparing the monitor for wall-mounting WARNING: To reduce the risk of personal injury or of damage to the equipment, check that the wall-mounting fixture is adequately installed and secured before attaching the monitor. Refer to the instructions supplied with the wall-mounting fixture and check tha...

Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshooting Problem Possible cause Suggested action Reference The syste...

Table 3-2. Troubleshooting (continued) Problem Possible cause Suggested action Reference Screen is blank and power indicator is steady amber or flashing green. The monitor is in Standby/Suspend mode. • Press any key on the keyboard or move the mouse to restore operation. • Check the Power Options se...

3. Use or to select Clock and Phase adjustment. • Clock (pixel frequency) adjusts the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the picture does not have the correct width. • Phase adjusts the phase of thr pixel clock sig...

Installing the monitor driver in Windows 7 To install the device driver in Microsoft® Windows 7, do the following: 1. Turn off the computer and all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then the system unit. Allow the system to boot into Wind...

Installing the monitor driver in Windows 8 /Windows 8.1 To use the Plug and Play feature in Microsoft Windows 8 /Windows 8.1 , do the following: 1. Turn off the computer and all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then the system unit. Allo...

Getting further help I f y o u s t i l l c a n ’t s o l v e y o u r p r o b l e m , p l e a s e c o n t a c t t h e L e n o v o S u p p o r t C e n t e r. F o rm o r e i n f o r m a t i o n o n c o n t a c t i n g t h e C u s t o m e r S u p p o r t C e n t e r, p l e a s e s e e A p p e n d i xA , ...

Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk.Any...

Collecting and recycling a disused Lenovo computer or monitorIf you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources. Computers and monitors ar...

Turkish statement of compliance The Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (EEE). Türkiye EEE Yönetmeli ğ ine Uygunluk Beyan ı Bu Lenovo ürünü, T.C. Çevre ve Orman ...