Lenovo ThinkVision L2230x- Manuals

1-2 Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Please see the illustration below for an example of the tilt range. User controls Your monitor has controls on the front which are use...

Chapter 1. 1-3 Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower position). Please see the instructions that come with the cable lock to learn how to attach it. Setting up your monitor This section provides information on how to set up ...

1-2 L2230x Wide USB Port Replicator Monitor User's Guide Plug the monitor power cord and the computer cord into grounded electrical outlets. Power on the monitor and the computer. Connect the USB cable to the upstream USB port of the back of the monitor and the other end to an appropriate USB port o...

Chapter 1. 1-5 To install the monitor driver, insert the Reference and Driver CD , click Install driver, and follow the on-screen instructions. To optimize your monitor image, press the Automatic Image Setup key. Automatic image setup requires that the monitor is warmed up for at least 15 minutes. T...

© . © 2-1 Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipme...

2-2 • Use the monitor brightness, contrast, and image adjustment controls, if equipped, to optimize the image on your screen to meet your visual preferences. • Keep your monitor screen clean so you can focus on the screen’s contents.Any concentrated and sustained visual activity can be tiring for yo...

Chapter 2. 2-3 Adjusting your monitor image This section describes the user control features for adjusting your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Using the On-Screen Display (OSD) controls To adiu...

Table 2-2. OSD functions OSD Icon on Main Menu Submenu Description Controls and Adjustments (Analog) Controls and Adjustments (Digital) Brightness/ Brightness Adjusts overall screen brightness Same as Analog Contrast Contrast Adjusts difference between light and dark areas Image Position Horizontal ...

2-6 Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes.The image size, position and shape might change when the display mode changes. This is normal and the ima...

Chapter 2. 2-7 Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of e...

2-8 Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not:• Apply water or liquid directly to your monitor.• Use solvents or abrasives.• Use flammable cleaning materials to clean your monitor or any other electrical equipment. • Touch the scr...

© © 3-1 Chapter 3. Reference information This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information, and service information. Monitor specifications Table 3-1. Monitor specifications for L2230x Wide USB Port Replicator Monitor Dimen...

Chapter 3. 3-3 Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshooting Problem Possible cause Suggested action Refe...

3-4 Manual image setup If automatic image setup does not establish the image that you prefer, perform manual image setup.Note: Have your monitor powered on for about 15 minutes, until the monitor warms up.1. Press at the bottom of the monitor to open the OSD menu. 2. Use or to select and press to ac...

Chapter 3. 3-5 Manually installing the monitor driver 8 ® Below are steps for manually installing the monitor driver in Microsoft ® Windows ® ® XP Microsoft Windows Vista Microsoft Windows 7 . Please see the Install Driver section of the Reference and Driver CD for automatic installation. Installing...

3-6 L2230x Wide USB Port Replicator Monitor User's Guide Installing the monitor driver in Windows Vista To install the device driver in Microsoft® Windows Vista, do the following: Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature in Windows Vista. 1. Turn off ...

Chapter 3. 3-7 8 Installing the monitor driver in Windows XP To use the Plug and Play feature in Windows XP, files should be loaded from the Reference and Driver CD . Note: This section must be completed before continuing with the Windows XP automatic image setup.1. Turn off the computer and all att...

Service information Customer responsibilities The warranty does not apply to a product which has been damaged due to accident, misuse, abuse, improper installation, usage not in accordance with product specifications and instructions, natural or personal disaster, or unauthorized alterations, repair...

Chapter 4. Working with L2230x Wide USB Port Replicator Monitor Connect the USB Port Replicator for the monitor 1. Be sure to install the USB Port Replicator driver for L2230x Wide USB Port Replicator monitor on your computer. The driver name is “ Usb_PR_Setup.exe". 2. Plug L2230x Wide USB Port ...

For the Windows XP operating system: a. Click the Audio tab. b. Select a USB audio line-out device from the Sound playback list, and select a USB audio line-in device from the Sound Recording list. c. If you can not use USB microphone connector (red) , you can Click “ Test hardware(T)" on the Au...

For the Windows XP or Windows Vista operating system: a. Click L2230x Wide USB Port Replicator Monitor icon in the taskbar notification area. The pop-up menu opens. b. Select Extend or Mirror . Note: If you are to use the Extend mode, decide which monitor you are to set as primary and which the seco...

Troubleshooting 1. Your computer does not recognize the port replicator of the monitor. Disconnect the USB cable from your computer, wait at least five seconds, and reinsert it into the USB connector of your computer. If the problem persists, try connecting the USB cable to a different USB connector...

B. Select Audio . For Windows XP users, the Sound and Audio Devices Properties window opens. For Windows Vista and Windows 7 users, the Sound window opens. C. Depending on the operating system you are using, do one of the following: For the Windows XP operating system: a. Click the Audio tab. b. Sel...

Chapter 4 5-1 Chapter 5. Read me This supplement provides additional hints and tips to assist you if you experience any problems with L2230x Wide USB Port Replicator Monitor (hereafter called port replicator). v The Ethernet driver of the port replicator cannot be installed on a computer with a Micr...

B-2 Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo Lenovo logo ThinkPad ENERGY STAR and the ENERGY STAR logo are registered US trademarks. Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countri...